光学与光电技术, 2010, 8 (4): 10, 网络出版: 2010-12-07
角锥棱镜和柱面镜的技术表述与检测
Specifications and Inspections of the Trihedral Retroreflector and Cylindrical Lens or Mirror
角锥棱镜 光束平行差 两面角 柱面透镜 trihedral retroreflector beam parallelism deviation dihedral angular error cylindrical lens or mirror
摘要
针对近年来应用颇多的两种较特殊的光学元件——角锥棱镜和柱面(透)镜技术表述的不同形式,为使之逐渐趋于规范和统一,参照国外现行的一些技术要求以及国内公司几年来实施的具体事例,给出若干说明、建议、指标和数据处理方法,尤其推荐用光束平行差的均方差来替代最大光束平行差的指标,是评定角锥棱镜技术特性中一项关键的新指标。
Abstract
Based on some specifications about two optical components-triangular corner reflector and cylindrical lens used, the rules and regulations in operation in overseas and home are consulted and the propositions, quality index and data processing method are put forward. Particularly, it is important that we recommend replace maximum beam parallelism deviation by the RMS beam parallelism deviation in the test triangular corner reflector.
参考文献
[1] Melles Griot ltd. Optics Guide 5［Z］. 1990: 10-14
[2] 吕茂钰. 光学冷加工工艺手册［M］. 北京: 机械工业出版社, 1991, 560-562.
[3] Perfomance Specification/Optical Components for Fire Control Instruments: General Specification Governing thr Manufacture, Assembly, and Inspection［S］. USA: MIL-PRF-13830B, 1997.
[4] 徐德衍. 柱面镜的实用定量检测和现代计算全息干涉检测［C］. 长春: 第十二届全国光学测试学术交流会, 2008.
[5] 徐德衍, 王青, 高志山, 等. 现行光学元件检测与国际标准［M］. 北京: 科学出版社, 2009.
徐德衍. 角锥棱镜和柱面镜的技术表述与检测[J]. 光学与光电技术, 2010, 8(4): 10. XU De-yan. Specifications and Inspections of the Trihedral Retroreflector and Cylindrical Lens or Mirror[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2010, 8(4): 10.
PDF全文
