红外与激光工程, 2018, 47 (11): 1102002, 网络出版: 2019-01-10  

用于激光微烧蚀冲量测量噪声误差的蒙特卡洛分析方法

Monte Carlo analytical method of impulse measuring noise error for laser micro-ablation
作者单位
航天工程大学 宇航科学与技术系 激光推进及其应用国家重点实验室, 北京 101416
摘要
水平扭摆冲量测量装置是研究激光与工质烧蚀冲量耦合的有效手段。针对测量过程易受干扰的特点, 基于冲量瞬间作用模型, 通过系统参数标定误差和冲量误差与噪信比关系, 采用蒙特卡洛数值仿真方法, 提出了测量噪声影响系统参数标定和冲量测量误差的分析方法。所提出的方法可应用于分析测量噪声对系统参数标定误差、冲量测量误差的影响规律研究, 为微小冲量测量误差和结构设计提供依据。
Abstract
Horizontal torsion balance impulse device is an effective approach to study the impulse couple produced by laser and working materials ablation. The measuring process was susceptible to the noise so that the analytical method for the way how the noise impacted on the system parameters calibration error and the impulse measuring error was put forward. The method was using the Monte Carlo number simulation method according to the relationship between the system parameters calibration error and the signal-to-noise ratio and the relationship between the impulse measuring error and the signal-to-noise ratio based on impulse instantaneous effect. This method can be used to analyze the influence characteristics how the noise impacts on the system parameters calibration error and the impulse measuring error so as to provide practical suggestions for the error analysis and the structure design.
参考文献

[1] 王广宇, 洪延姬. 微冲量测量的建模误差分析[J]. 推进技术, 2009, 30(4): 509-512.

    Wang Guangyu, Hong Yanji. Modeling error analysis of micro-impulse measurements[J]. Journal of Propulsion Technology, 2009, 30(4): 509-512. (in Chinese)

[2] 常浩, 叶继飞, 林正国. 脉冲微推力作用下的扭摆系统响应特性仿真分析[J]. 红外与激光工程, 2016, 45(S2): S218001.

    Chang Hao, Ye Jifei, Lin Zhengguo. Simulation analysis of response characteristics of torsion pendulum by pulse micro-thrust[J]. Infrared and Laser Engineering, 2016, 45(S2): S218001. (in Chinese)

[3] 金星, 洪延姬, 周伟静, 等. 一种用于微小推力冲量测量的扭摆系统参数标定方法[J]. 推进技术, 2015, 36(10): 1554-1559.

    Jin Xing, Hong Yanji, Zhou Weijing, et al. A parameter calibration method for torsion pendulum using in micro thrust and impulse measurement[J]. Journal of Propulsion Technology, 2015, 36(10): 1554-1559. (in Chinese)

[4] James E Polk, Anthony Pancotti, Thomas Hagg, et al. Recommended practice for thrust measurement in electric propulsion testing[J]. Journal of Propulsion and Power, 2017, 33(3): 539-555.

[5] Claude R Phipps, James Luke. Diode laser-driven microthrusters: A new departure for micropropulsion[J]. AIAA Journal, 2002, 40(2): 310-318.

[6] Claude R Phipps. Micro laser plasma thrusters for small satellites [R]. AFRL-SR-BL-TR-99-0180, 1999.

[7] Phipps C, Luke J, Lippert T, et al. Micropropulsion using a Laser Ablation Jet[J]. J Propulsion and Power, 2004, 20(6): 1000-1011.

[8] Claude R Phipps, James R Luke, Wesley Helgeson. A 25 nN low-noise thrust stand for microthruster[C]//International Electric Propulsion Conference, 2005: IEPC 318.

[9] Manuel Gamero-Casta 觡o. A torsional balance for the characterization of microNewton thrusters[J]. Review of Scientific Instruments, 2003, 74(10): 4509-4514.

[10] Koizumi H, Komurasaki K, Arakawa Y. Development of thrust stand for low impulse measurement from microthrusters[J]. Review of Scientific Instruments, 2004, 75(10): 3185-3190.

[11] Yang Yuanxia, Tu Liangcheng, Yang Shanqing, et al. A torsion balance for impulse and thrust measurements of micro-Newton thrusters[J]. Review of Scientific Instrument, 2012, 83: 015105.

[12] 杨元侠. 微牛顿量级推进器的推力性能研究[D]. 武汉: 华中科技大学, 2012.

    Yang Yuanxia. Researches on the thrust and impulse performances of micro-newton thrusters[D]. Wuhan: Huazhong University of Science and Technology, 2012. (in Chinese)

[13] 周伟静, 洪延姬, 叶继飞. 激光微推力器多脉冲作用下的力学性能测量方法研究[J]. 红外与激光工程, 2016, 45(S2): S206002.

    Zhou Weijing, Hong Yanji, Ye Jifei. Mechanical performance measurement method for laser micro-thruster working in multi-pulse mode[J]. Infrared and Laser Engineering, 2016, 45(S2): S206002. (in Chinese)

[14] 金星, 常浩, 叶继飞. 超短脉冲激光烧蚀冲量耦合测量方法[J]. 红外与激光工程, 2017, 46(3): 0329002.

    Jin Xing, Chang Hao, Ye Jifei. Methods of extreme short pulse laser ablation impulse coupling measurement[J]. Infrared and Laser Engineering, 2017, 46(3): 0329002. (in Chinese)

金星, 洪延姬, 常浩, 李南雷. 用于激光微烧蚀冲量测量噪声误差的蒙特卡洛分析方法[J]. 红外与激光工程, 2018, 47(11): 1102002. Jin Xing, Hong Yanji, Chang Hao, Li Nanlei. Monte Carlo analytical method of impulse measuring noise error for laser micro-ablation[J]. Infrared and Laser Engineering, 2018, 47(11): 1102002.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!