超高压氦增压系统研制

尹剑; 陈绍华; 张伟光; 李海容; 夏立东

doi:doi:10.3788/hplpb20102202.0357

强激光与粒子束, 2010, 22 (2): 357, 网络出版: 2010-05-28

超高压氦增压系统研制

Development of ultrahigh pressure helium booster system

论文大纲

尹剑 ^*陈绍华张伟光李海容夏立东

作者单位

中国工程物理研究院核物理与化学研究所,四川绵阳 621900

惯性约束聚变氦增压系统超高压高压漏率 ICF He booster system ultrahigh pressure high pressure leak rate

摘要

主要介绍了超高压氦增压系统的工作原理、设计原则和加工方法,讨论了各功能部件的选择与高压密封设计,同时指出了在使用超高压氦增压系统时应当注意的问题。在系统建成后,通过手动、自动控制分步增压和保压实现了最高300 MPa的超高压氦气输出,相应的高压漏率达到(3.5～5.0)×10-7 Pa·m3/s。对系统主要性能参数进行了考核,并将其与3种同类增压装置的相应参数进行了比较,结果表明该系统设计合理、性能优越并且安全可靠。该系统将主要应用于惯性约束微球靶充氘氚系统的各项性能测试。

Abstract

Operation principle,design principle,fabrication and cautions in operation of ultrahigh pressure He booster system are introduced,and main parts selection method and high pressure seal design of the booster system are discussed. The as-developed system can output 300 MPa helium gas with (3.5～5.0)×10-7 Pa·m3/s leak rate through manual or automatic pressure boosting and keeping. Main function parameters of the system are accessed and compared with those of three congeneric systems. The result shows that the system was rationally designed with superior performance and safety,and the system would be used to test ICF microsphere filling DT system.

参考文献

[1] 唐永建,蒋伟阳. ICF低温冷冻靶制备技术进展[J].强激光与粒子束,1998,10(1):155-160.(Tang Yongjian,Jiang Weiyang. Cryogenic targets fabrication methods for inertial confinement fusion.High Power Laser and Particle Beams,1998,10(1):155-160)

[2] 尹剑,陈绍华,张小安,等. 微球充气工艺实验系统安全性能研究[C]//第九届中国核靶技术学术交流会论文集.2007.(Yin Jian,Chen Shaohua,Zhang Xiaoan,et al. Safe function study of experimental system for filling gas in microsphere//Proceeding of the 9th National Nuclear Target Symposium.2007)

[3] 姚书久,李海容,张小安,等. 高压充氘氚气体金属系统[J]. 原子能科学技术,2002,36(4/5):413-415.(Yao Shujiu,Li Hairong,Zhang Xiaoan,et al. Study of metal system for filling D-T gas under the high pressure.Atomic Energy Science and Technology,2002,36(4/5):413-415)

[4] 陈绍华,龙兴贵,彭述明,等. 微球充气工艺实验系统研制[J].原子能科学技术,2008,42(9):861-864.(Chen Shaohua,Long Xinggui,Peng Shuming,et al. Development of experiment system for filling gas in microsphere.Atomic Energy Science and Technology,2008,42(9):861-864)

[5] 薛杨声,赵纪兰. 高压装置及其设计原理[M]. 北京:兵器工业出版社,1992:118-120.(Xue Yangsheng,Zhao Jilan. High pressure equipment and design principle.Beijing: Weapon Industry Press,1992:118-120)

[6] 中国亿威仕流体控制有限公司. IVS气体增压系统[OL].[2009-10-15]. http://www.szivs.cn/index.html.(China IVS Tester Corporation. IVS gas booster system.[2009-10-15].http://www.szivs.cn/index.html)

[7] 美国皮皮艾北京有限公司. PPI气体压缩机系统[OL].[2009-10-15].http://www.ppichinabj.com. (America PPI Beijing Limited Company. Pressure products industries gas compressor system.[2009-10-15].http://www.ppichinabj.com)

[8] 麦格思维特(上海)流体工程有限公司. MAXIMATOR气体增压器[OL].[2009-10-15].http://www.maximator.cn. (MAXIMATOR (Shanghai) Hydro-engineering Limited Company. MAXIMATOR gas booster equipment.[2009-10-15].http://www.maximator.cn)

尹剑, 陈绍华, 张伟光, 李海容, 夏立东. 超高压氦增压系统研制[J]. 强激光与粒子束, 2010, 22(2): 357. Yin Jian, Chen Shaohua, Zhang Weiguang, Li Hairong, Xia Lidong. Development of ultrahigh pressure helium booster system[J]. High Power Laser and Particle Beams, 2010, 22(2): 357.

超高压氦增压系统研制

关于本站 Cookie 的使用提示

全站搜索

超高压氦增压系统研制

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索