[1] Ibrahim I A, Mohamed F A, Lavernia E J. Particulate reinforced metal matrix composites-a review[J]. Journal of Materials Science, 1991, 26(5): 1137-1156.

[2] Zhang Q, Ma X Y, Wu G H. Interfacial microstructure of SiCp/Al composite produced by the pressureless infiltration technique[J]. Ceramics International, 2013, 39(5): 4893-4897.

[3] El-Gallab M, Sklad M. Machining of Al/SiC particulate metal-matrix composites: Part I: Tool performance[J]. Journal of Materials Processing Technology, 1998, 83(1-3): 151-158.

[4] Wang T, Xie L J, Wang X B, et al. Surface integrity of high speed milling of Al/SiC/65p aluminum matrix composites[J]. Procedia CIRP, 2013, 8: 475-480.

[5] El-Gallab M, Sklad M. Machining of Al/SiC particulate metal-matrix composites: Part II: Workpiece surface integrity[J]. Journal of Materials Processing Technology, 1998, 83(1-3): 277-285.

[6] Dandekar C R, Shin Y C. Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites[J]. Composites Part A: Applied Science and Manufacturing, 2009, 40(8): 1231-1239.

[7] Muller F, Monaghan J. Non-conventional machining of particle reinforced metal matrix composites[J]. Journal of Materials Processing Technology, 2001, 118(1-3): 278-285.

[8] Singh P N, Raghukandan K, Rathinasabapathi M, et al. Electric discharge machining of Al-10% SiCp as-cast metal matrix composites[J]. Journal of Materials Processing Technology, 2004, 155: 1653-1657.

[9] Rozenek M, Kozak J, Dabrowshi L, et al. Electrical discharge machining characteristics of metal matrix composites[J]. Journal of Materials Processing Technology, 2001, 109(3): 367-370.

[10] Harris GL.Properties of silicon carbide[M]. London: Institution of Electrical Engineers, 1995: 134.

[11] Molian P, Pecholt B, Gupta S. Picosecond pulsed laser ablation and micromachining of 4H-SiC wafers[J]. Applied Surface Science, 2009, 255(8): 4515-4520.

[12] Dandekar C R, Shin Y C. Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12): 1603-1610.

[13] Dandekar CR.Multi-scale modeling and laser-assisted machining of metal matrix composites[D]. Indiana: Purdue University, 2010.

[14] Desbiens J P, Masson P. ArF excimer laser micromachining of Pyrex, SiC and PZT for rapid prototyping of MEMS components[J]. Sensors and Actuators A: Physical, 2007, 136(2): 554-563.

[15] NeuenschwanderB, Bucher GF, NussbaumC, et al. Processing of metals and dielectric materials with ps-laser pulses: Results, strategies, limitations and needs[C]. SPIE, 2010, 7584: 75840R.

[16] Momma C, Nolte S, Chichkov B N. et al. Precise laser ablation with ultrashort pulses[J]. Applied Surface Science, 1997, 109: 15-19.

[17] Teixidor D, Ferrer I, Ciurana J. et al. Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel[J]. Robotics and Computer-Integrated Manufacturing, 2013, 29(1): 209-218.

[18] VankoG, ZehetnerJ, CholevaP, et al. Laser ablation: A supporting technique to micromachining of SiC[C]. Ninth International Conference on Advanced Semiconductor Devices and Microsystems, 2012: 259-262.

[19] Dahotre N B, Mccay M H, Mccay T D, et al. Pulse laser processing of a SiC/Al-alloy metal matrix composite[J]. Journal of Materials Research, 1991, 6(3): 514-529.

[20] Hong L, Vilar R M, Wang Y M. Laser beam processing of a SiC particulate reinforced 6061 aluminum metal matrix composite[J]. Journal of Materials Science, 1997, 32(20): 5545-5550.

[21] Mahanty S. Gouthama. Surface refinement of metal-matrix composites (MMC) Al-Si/SiCp by pulse-laser treatment and its wear characteristics[J]. Journal of Russian Laser Research, 2015, 36(3): 269-275.

[22] Qian D S, Zhong X L, Hashimoto T, et al. Effect of excimer laser surface melting on the corrosion performance of a SiCp/Al metal matrix composite[J]. Applied Surface Science, 2015, 330: 280-291.

[23] Pehrsson P E, Kaplan R. Excimer laser cleaning, annealing, and ablation of β-SiC[J]. Journal of Materials Reasearch, 1989, 4(6): 1480-1490.

[24] Gupta S, Pecholt B, Molian P. Excimer laser ablation of single crystal 4H-SiC and 6H-SiC wafers[J]. Journal of Materials Science, 2011, 46(1): 196-206.

[25] Salama I A, Quick N R, Kar A. Microstructural and electrical resistance analysis of laser-processed SiC substrates for wide bandgap semiconductor materials[J]. Journal of Materials Science, 2005, 40(15): 3969-3980.

[26] Salama I A, Kar A, Quick N R. Laser direct-metallization of silicon carbide without metal deposition[J]. Materials Research Society Symposium Proceedings, 2003, 764: 75-80.

[27] Miotello A, Kelly R. Laser-induced phase explosion: New physical problems when a condensed phase approaches the thermodynamic critical temperature[J]. Applied Physics A: Materials Science and Processing, 1999, 69: S67-S73.

[28] Porneala C, Willis D A. Time-resolved dynamics of nanosecond laser-induced phase explosion[J]. Journal of Physics D: Applied Physics, 2009, 42(15): 155503.

[29] Duc D H, Naoki I, Kazuyoshi F. A study of near-infrared nanosecond laser ablation of silicon carbide[J]. International Journal of Heat and Mass Transfer, 2013, 65: 713-718.