保护气体对薄板A304光纤激光焊接接头形貌和力学性能的影响
[1] 肖荣诗, 梅汉华, 左铁钏. 辅助气体对CO2激光焊接光致等离子体屏蔽的影响[J]. 中国激光, 1998, 25(11): 1045-1050.
[2] 张林杰, 张建勋, 王 蕊, 等. 侧吹气体对不锈钢薄板激光焊接焊缝成形的影响[J]. 稀有金属材料与工程, 2006, 35(s2): 39-44.
Zhang Linjie, Zhang Jianxun, Wang Rui, et al. Effects of side assist gas on weld shaping in laser welding process of thin stainless plate[J]. Rare Metal Materials and Engineering, 2006, 35(s2): 39-44.
[3] 刘 键, 石 岩, 刘 佳, 等. 保护气体对奥氏体不锈钢激光焊接的影响[J]. 激光与光电子学进展, 2014, 51(5): 051402.
[4] Sathiya P, Mahendra Kumar Mishra, Soundararajan R, et al. Shielding gas effect on weld characteristics in arc-augmented laser welding process of super austenitic stainless steel[J]. Optics & Laser Technology, 2013, 45: 46-55.
[5] 李 耿, 张 林, 高 明, 等. 保护气体对不锈钢光纤激光焊接的影响[J]. 金属铸锻焊技术, 2011, 40(23): 126-129.
Li Geng, Zhang Lin, Gao Ming, et al. Influence of shielding on fiber laser welding of stainless steel[J]. Casting Forging Welding, 2011, 40(23): 126-129.
[6] 李亚江, 李嘉宁, 等. 激光焊接/切割/熔覆技术[M]. 北京: 化学工业出版社, 2012: 40.
[7] 江 利, 张太超, 崔永丽. 现代金属材料及应用[M]. 徐州: 中国矿业大学出版社, 2009: 170.
[8] Xiao R S, Zuo T C, Volz R. Experimental research on the influence of laser-induced plasma on the beam focusing during high-power CO2 laser materials processing[J]. Chinese J Lasers, 1998, B7(6): 550-554.
[9] Locke E, Hoag E, Hella R. Deep penetration welding with high-power CO2 lasers[J]. Journal of Quantum Electronics, 1972, 8(2): 245-249.
[10] Fowler M C, Smith D C. Ignition and maintenance of subsonic plasma waves in atmospheric pressure air by cw CO2 laser radiation and their effect on laser beam propagation[J]. Journal of Applied Physics, 1975, 46(1): 138-150.
[11] Hosseini Motlagh N S, Parvin P, Jandaghi M, et al. The influence of different volume ratios of He and Ar in shielding gas mixture on the power waste parameters for Nd∶YAG and CO2 laser welding[J]. Optics & Laser Technology, 2013, 54: 191-198.
[12] Fan Y, Chen Z, Zhang C H, et al. A comparison of microstructure and mechanical properties of welded thin Ti6Al4V with three different types of laser[J]. Material Research Innovations, 2015, 19(s4): s187-s192.
[13] 陈庆雷. SUS301L奥氏体不锈钢激光焊接头组织与力学性能的硏究[D]. 长春: 吉林大学, 2012.
Chen Qinglei. Study on the microstructures and mechanical properties of laser welded SUS301L austenitic stainless steel[D]. Chang Chun: Jilin University, 2012.
[14] 樊 宇, 田文腾, 李宗佩, 等. 应用脉冲式Nd∶YAG激光焊接心脏辅助装置[J]. 光学学报, 2015, 35(s2): s214012.
Fan Yu, Tian Wenteng, Li Zongpei, et al. Third-generation of left ventricular assist device in pulsed Nd∶YAG laser welding[J]. Acta Optica Sinica, 2015, 35(s2): s214012.
樊宇, 李沛智, 柳岸敏, 陈正, 郭跃. 保护气体对薄板A304光纤激光焊接接头形貌和力学性能的影响[J]. 激光与光电子学进展, 2017, 54(1): 011404. Fan Yu, Li Peizhi, Liu Anmin, Chen Zheng, Guo Yue. Effect of Shielding Gas on Joint Morphology and Mechanical Property of Fiber Laser Welding of A304 Thin Sheet[J]. Laser & Optoelectronics Progress, 2017, 54(1): 011404.