[1] 季学荣, 丁晓红. 板壳结构加强筋优化设计方法[J]. 机械强度, 2012, 34(5): 692-698.

    Ji Xuerong, Ding Xiaohong. Design optimization method of stiffeners on plane and shell structures[J]. Journal of Mechanical Strength, 2012, 34(5): 692-698.

[2] MorelloL, Rossini LR, PiaG, et al. The automotive body[M]. Heidelberg: Springer Verlag, 2011: 275- 310.

[3] 陈冬民, 王丽娟, 陈宗渝, 等. 基于等效原理的板壳结构加强筋设计方法[J]. 机械科学与技术, 2015, 34(12): 1841-1845.

    Chen Dongmin, Wang Lijuan, Chen Zongyu, et al. Stiffener design method for plates and shells based on equivalence principle[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(12): 1841-1845.

[4] 宋建丽, 李永堂, 邓琦林, 等. 激光熔覆成形技术的研究进展[J]. 机械工程学报, 2010, 46(14): 29-39.

    Song Jianli, Li Yongtang, Deng Qilin, et al. Research progress of laser cladding forming technology[J]. Journal of Mechanical Engineering, 2010, 46(14): 29-39.

[5] Li X Q, Chen Z G, Xia J A, et al. Amorphous structures in laser cladding of ZL111 aluminum alloy: Semi-quantitative study by differential thermal analysis(DTA)[J]. Chinese Journal of Lasers, 2000, B9(1): 85-90.

[6] Fu Y C, Martin B, Loredo A, et al. Velocity distribution of the powder particles in laser cladding[J]. Chinese Journal of Lasers, 2002, B11(6): 469-474.

[7] 王斌修, 田新国. 浅析激光熔覆成形技术的应用及其发展方向[J]. 制造技术与机床, 2011( 11): 57- 59.

    WangBinxiu, TianXinguo. The application and development direction of laser cladding forming technology[J]. Manufacturing Technology and Machine Tool, 2011( 11): 57- 59.

[8] Chivel Y A. Cone-shaped beam in selective laser cladding[J]. Technical Physics Letters, 2015, 31(1): 1-3.

[9] 钟敏霖, 杨林, 刘文今, 等. 激光快速直接制造W/Ni合金太空望远镜准直器[J]. 中国激光, 2004, 31(4): 482-486.

    Zhong Minlin, Yang Lin, Liu Wenjin, et al. Laser direct manufacturing W/Ni telescope collimation component[J]. Chinese J Lasers, 2004, 31(4): 482-486.

[10] 方琴琴, 傅戈雁, 王聪, 等. 带连接筋双层薄壁件激光直接成形[J]. 中国激光, 2017, 44(2): 0202005.

    Fang Qinqin, Fu Geyan, Wang Cong, et al. Laser direct forming technology of double thin-walled parts with connecting ribs[J]. Chinese J Lasers, 2017, 44(2): 0202005.

[11] 董鹏, 陈济轮. 国外选区激光熔化成形技术在航空航天领域应用现状[J]. 航天制造技术, 2014( 1): 1- 5.

    DongPeng, ChenJilun. Current status of selective laser melting for aerospace applications abroad[J]. Aerospace Manufacturing Technology, 2014( 1): 1- 5.