保偏光纤偏振特性测试系统的光路研究
[1] Lefevre H C;ZHANG Gui-cai,WANG Wei.The Fibe-Optic Gyroscope[M].Beijing:National Defence Industry Press(Lefevre H C;张桂才,王巍.光纤陀螺仪.北京:国防工业出版社),2002.1.
[3] HUANG Jian-yu,JI Jia-rong. Measurement of extinction ratio of polarizer using interference method of polarization [J].Applied Laser(黄建余,季家熔.偏振干涉法用于偏振器消光比的测量.应用激光),1996,16(3):267-268.
[4] MENG Zhou,HU Yong-ming,CHEN Zhe,et al.The automatic measurement instrument for the polarization parameters of 1.3 μmwavelength optical fiber[J].Acta Photonica Sinica(孟洲,胡永明,陈哲,等.1.3 μm波长光纤偏振参数自动测试仪.光子学报),1999,28(11):1002-1004.
[5] MAO Cai-hong,SHU Xiao-wu,LIU Cheng,et al. Theoretical and experiment research on polarization parameters test system of fiber -optic gyroscopes[J].Laser&Inffared(毛彩虹,舒晓武,刘承,等.光纤陀螺仪的光学器件偏振特性测试方法研究.激光与红外),2002,32(4):279-281.
[6] XU Hong-jie,QIN Bing-kun,CHEN Shu-fen.Measurement for extinction ratio of fibe-optic polarizer [J].Optical Technique (徐宏杰,秦秉坤,陈淑芬.光纤型偏振器消光比测试方法研究.光学技术),2002,28(5):419-421.
[7] XU Hong-jie,HE Jun,QIN Bing-kun,et al. Design of high precision optical fiber polarization measuring system[J].Optical Technique(徐宏杰,何珺,秦秉坤,等.高精度保偏光纤偏振测试系统的设计.光学技术),2003,29(2):208-210.
[8] HAO Ai-fu,FENG Li-shuang,XU Hong-jie,et al. Manufacture and exploiture of optical fiber polarization characteristics auto-measuring system[J].Optical Technique(郝爱福,冯丽爽,徐宏杰,等.保偏光纤偏振特性自动测试系统的研制与开发.光学技术),2004,30(3):378-380.
[9] ZOU Xue-feng,FENG Li-shuang,MA Ying-jian. Design and realization of the auto-measuring system of optical fiber polarization characteristics based on DSP technology[A].1st Academic Forum for Graduate Students at Beihang University [C].Beijin:Beihang University(邹雪峰,冯丽爽,马迎建.基于DSP的保偏光纤偏振特性自动测试系统的设计与实现.首届研究生学术论坛文集.北京:北京航空航天大学),2004.485.
[10] YU Dao-yin,TAN Heng-ying. Engineering Optics[M].Beijing:Mechanical Industry Press(郁道银,谈恒英.工程光学.北京:机械工业出版社),2002.
李彦, 冯丽爽, 徐宏杰, 张春熹. 保偏光纤偏振特性测试系统的光路研究[J]. 红外与激光工程, 2005, 34(4): 430. 李彦, 冯丽爽, 徐宏杰, 张春熹. Light route research on optical fiber polarization characteristics test system[J]. Infrared and Laser Engineering, 2005, 34(4): 430.