连续液面成型3D打印技术及建筑模型制作
[1] Melchels F P W, Feijien J, Grijpma D W, et al. A review on stereo lithography and its applications in biomedical engineering[J]. Biomaterials, 2010, 31(24): 6121-6130.
[2] 李东方, 陈继民, 袁艳萍, 等. 光固化快速成型技术的进展及应用[J]. 北京工业大学学报, 2015, 41(12): 1769-1774.
Li Dongfang, Chen Jimin, Yuan Yanping, et al. Development and application of stereo lithography apparatus[J]. Journal of Beijing University of Technology, 2015, 41(12): 1769-1774.
[3] Tumbleston J R, Shirvanyants D, Ermoshkin N, et al. Continuous liquid interface production of 3D objects[J]. Science, 2015, 347(6228): 1349-1352.
[4] Dendukuri D, Panda P, Haghgooie R, et al. Modeling of oxygen-inhibited free radical photo-polymerization in a PDMS microfluidic device[J]. Macromolecules, 2008, 41(22): 8547-8556.
[5] 王超, 张征宇, 殷国富, 等. 一种基于光固化快速成型的飞机静弹性风洞实验模型设计方法[J]. 航空学报, 2014, 35(5): 1193-1199.
Wang Chao, Zhang Zhengyu, Yin Guofu, et al. A design method of the static aeroelastic aircraft model based on stereolithography for wind tunnel test[J]. Acta Aeronautica et Astronautica Sinica. 2014, 35(5): 1193-1199.
[6] Tess. 3D printed models and wind-tunnel technology optimize stadium designs for 2022 FIFA World Cup in Qatar[OL]. (2016-06-13)[ 2016-07-01]. http://www.3ders.org/articles/20160613-3d-printed-models-and-wind-tunnel-technology-optimize-stadium-designs-for-2022-fifa-world-cup-in-qatar.html.
林宣成, 刘华刚. 连续液面成型3D打印技术及建筑模型制作[J]. 光学学报, 2016, 36(8): 0816002. Lin Xuancheng, Liu Huagang. Continuous Liquid Interface Production 3D Printing Technology and Its Application in Fabrication of Architecture Models[J]. Acta Optica Sinica, 2016, 36(8): 0816002.