[1] 黄卫东, 林鑫, 陈静, 等. 激光立体成形—高性能致密金属零件的快速自由成形[M]. 西安: 西北工业大学出版社, 2007: 1-60.

    Huang Weidong, Lin Xin, Chen Jing, et al.. Laser Solid Forming[M]. Xi′ an: Northwestern Polytechnical University Press, 2007: 1-60.

[2] 黄卫东, 林鑫. 激光立体成形高性能金属零件研究进展[J]. 中国材料进展, 2010, 29(6): 12-27.

    Huang Weidong, Lin Xin. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 2010, 29(6): 12-27.

[3] Liu F C, Lin X, Yang G L, et al.. Microstructure and residual stress of laser rapid formed inconel 718 nickel-base superalloy[J]. Optics & Laser Technology, 2011, 43(1): 208-213.

[4] 马良, 林鑫, 谭华, 等. 基于样式表达的激光立体成形路径优化[J]. 激光与光电子学进展, 2013, 50(3): 031405.

    Ma Liang, Lin Xin, Tan Hua, et al.. Scanning path optimization of laser solid forming based on style[J]. Laser & Optoelectronics Progress, 2013, 50(3): 031405.

[5] Yang G L, Lin X, Liu F C, et al.. Laser solid forming Zr-based bulk metallic glass[J]. Intermetallics, 2012, 22: 110-115.

[6] Lin X, Cao Y Q, Wu X Y, et al.. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel[J]. Materials Science and Engineering A, 2012, 553: 80-88.

[7] Liu Y H, Chen J, Zhang Q, et al.. Microstructure characteristics of laser forming repaired Ti60 alloy[J]. Chin Opt Lett, 2011, 9(7): 071402.

[8] 薛蕾, 陈静, 虞文军, 等. Ti-6Al-4V 合金激光立体成形沉积态的平面应变断裂韧度[J]. 中国激光, 2009, 36(12): 3210-3214.

    Xue Lei, Chen Jing, Yu Wenjun, et al.. Investigation on KIC of as-deposited Ti-6Al-4V alloy fabricated by laser solid forming[J]. Chinese J Lasers, 2009, 36(12): 3210-3214.

[9] Vrancken B, Thijs L, Kruth J P, et al.. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting[J]. Acta Materialia, 2014, 68(15): 150-158.

[10] Gu D D, Meiners W, Wissenbach K, et al.. Laser additive manufacturing of metallic components: Materials, processes and mechanisms[J]. International Materials Reviews, 2012, 57(3): 133-164.

[11] 宋梦华, 林鑫, 刘丰刚, 等. 激光立体成形零件竖直外侧壁向内倾斜的形成及模型[J]. 金属学报, 2015, 51(6): 753-761.

    Song Menghua, Lin Xin, Liu Fenggang, et al.. Formation and modeling of the vertical outside wall of components inclining inward in laser solid forming[J]. Acta Metallurgica Sinica, 2015, 51(6): 753-761.

[12] Li Y M, Yang H, Lin X, et al.. The influences of processing parameters on forming characterizations during laser rapid forming[J]. Materials Science and Engineering A, 2003, 360(1-2): 18-25.

[13] De O U, Ocelik V, De H J T M. Analysis of coaxial laser cladding processing conditions[J]. Surface & Coatings Technology, 2005, 197(2-3): 127-136.

[14] Onwubolu G C, Davim J P, Oliveira C, et al.. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search[J]. Optics & Laser Technology, 2007, 39(6): 1130-1134.

[15] Yu J, Lin X, Wang J J, et al.. Mechanics and energy analysis on molten pool spreading during laser solid forming[J]. Applied Surface Science, 2010, 256(14): 4612-4620.

[16] Liu J C, Li L J. Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser [J]. Optics & Laser Technology, 2005, 37(6): 478-482.

[17] Liu J C. Formation of cross-sectional profile of a clad bead in coaxial laser cladding[J]. Optics & Laser Technology, 2007, 39(8): 1532-1536.

[18] Bi G J, Gasser A, Wissenbach K, et al.. Characterization of the process control for the direct laser metallic powder deposition[J]. Surface & Coatings Technology, 2006, 201(6): 2676-2683.

[19] Tan H, Chen J, Zhang F Y, et al.. Process analysis for laser solid forming of thin-wall structure[J]. International Journal of Machine Tools & Manufacture, 2010, 50(1): 1-8.

[20] Song M H, Lin X, Yang G L, et al.. Influence of forming atmosphere on the deposition characteristics of 2Cr13 stainless steel during laser solid forming[J]. Journal of Materials Processing Technology, 2014, 214(3): 701-709.

[21] Lin J M. Concentration mode of the powder stream in coaxial laser cladding[J]. Optics & Laser Technology, 1999, 31(3): 251-257.

[22] Pinkerton A J, Li L. Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling[J]. Journal of Manufacturing Science and Engineering, 2004, 126(1): 33-41.