光学学报, 2013, 33 (2): 0222002, 网络出版: 2012-12-05   

紫外光固化LED线光源的光学系统设计及仿真

Optical System Design and Simulation of LED Line Source for Ultraviolet Curing
作者单位
北京理工大学光电成像技术与系统教育部重点实验室, 北京 100081
摘要
针对紫外光固化技术领域中365 nm紫外LED光源进行了应用研究,提出了用菲涅耳透镜替代传统的柱透镜实现光源线聚焦的技术方案,给出了设计过程与仿真结果。从已有的平板菲涅耳透镜的结构设计公式出发,推导了在透镜通光孔径、焦距范围已知的情况下,平板基底厚度、焦距等参数的确定依据,设计出了相应的点聚焦和线聚焦菲涅耳透镜,组成紫外光固化LED线光源的光学系统。运用Tracepro软件建立了菲涅耳透镜系统模型和柱透镜系统模型,通过光线追迹分析了能量利用率、辐照度均匀性等重要指标。仿真结果表明:采用菲涅耳透镜的光学系统可以实现应用目标面上的光学技术指标,提高了能量利用率及辐照度均匀性。
Abstract
An application research on 365 nm ultraviolet LED used in the field of ultraviolet curing is performed, and a technical method using Fresnel lens to replace traditional cylindrical lens is suggested to realize line focusing of the light source. The design process and simulation results are provided. Based on foregone flat Fresnel lens design formulae, determination basis of fundus thickness and focus with known clear aperture diameter and focus range is deduced. The optical system includes point-focusing Fresnel lens and line-focusing Fresnel lens. The models of Fresnel lens optical system and cylindrical lens optical system are established with a tracepro software. Important indexes including energy utilization efficiency and irradiance uniformity are analyzed with ray tracing. Simulation results show that the optical system using Fresnel lens can reach the optical technological indexes on the target plane and provide higher energy utilization efficiency and irradiance uniformity.
参考文献

[1] 朱胜武, 施文芳. 紫外光/电子束固化市场状况及发展趋势[J]. 辐射研究与辐射工艺学报, 2001, 19(3): 161~167

    Zhu Shengwu, Shi Wenfang. The market and development of UV/EB curing technology [J]. J. Radiation Research and Radiation Processing, 2001, 19(3): 161~167

[2] 芦永军, 许文海, 赵欢 等. 二维空间紫外LED阵列实现单光班辐照度固化系统的设计[J]. 应用光学, 2009, 30(1): 16~19

    Lu Yongjun, Xu Wenhai, Zhao Huan et al.. Design a single spot UV-curing system with two-dimensional UV-LED array[J]. J. Applied Optics, 2009, 30(1): 16~19

[3] 谢军, 游立德, 侯文杰. 光固化快速成形中的紫外LED光源系统实验研究[J]. 光电工程, 2009, 36(2): 100~104

    Xie Jun, You Lide, Hou Wenjie. Experimental research of ultraviolet LED source system in stereolithography apparatus[J]. Opto-Electronic Engineering, 2009, 36(2): 100~104

[4] 杨杰. UV LED紫外固化系统设计与研究[D]. 哈尔滨: 哈尔滨工业大学, 2009. 32~44

    Yang Jie. Design and Research of UV LED Curing System[D]. Harbin: Harbin Institute of Technology, 2009. 32~44

[5] 芦永军, 许文海, 曲艳玲 等. 365 nm紫外LED二维空间阵列光学系统设计[J]. 光子学报, 2009, 38(2): 268~271

    Lu Yongjun, Xu Wenhai, Qu Yanling et al.. Optical system design of two dimensional array of 365 nm UV LED[J]. Acta Photonica Sinica, 2009, 38(2): 268~271

[6] E. A. Krasina, E. V. Tveriyanovich, A. V. Romankevich. Optical efficiency of solar engineering Fresnel lenses[J]. Applied Solar Energy, 1989, 25(6): 6~10

[7] 李鹏, 吴贺利, 杨培环 等. 菲涅耳聚光透镜的一般设计方法及效率分析[J]. 武汉理工大学学报, 2010, 32(6): 62~66

    Li Peng, Wu Heli, Yang Peihuan et al.. General design method and optical efficiency of the solar concentrator by Fresnel lens[J]. J. Wuhan University of Technology, 2010, 32(6): 62~66

[8] 郭孝武. 菲涅耳透镜统一设计方法[J]. 太阳能学报, 1991, 12(4): 424~426

    Guo Xiaowu. A general method for Fresnel lens design[J]. Acta Energiae Solaris Sinica, 1991, 12(4): 424~426

[9] 丁德强, 柯熙政. 一种通用白光LED数学发光模型研究[J]. 光学学报, 2010, 30(9): 2536~2540

    Ding Deqiang, Ke Xizheng. Research on generalized mathematic radiation model for white LED[J]. Acta Optica Sinica, 2010, 30(9): 2536~2540

[10] 荆雷, 刘华, 赵会富 等. 紧凑型高亮度发光二极管准直镜设计[J]. 光学学报, 2011, 31(12): 1222001

    Jing Lei, Liu Hua, Zhao Huifu et al.. Compact collimator design for high-brightness light-emitting diode[J]. Acta Optica Sinica, 2011, 31(12): 1222001

孔晓慧, 白廷柱, 杨雅丽. 紫外光固化LED线光源的光学系统设计及仿真[J]. 光学学报, 2013, 33(2): 0222002. Kong Xiaohui, Bai Tingzhu, Yang Yali. Optical System Design and Simulation of LED Line Source for Ultraviolet Curing[J]. Acta Optica Sinica, 2013, 33(2): 0222002.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!