同步辐射压弯镜重力补偿方法

黄智超; 程建高; 李飞; 张磊; 王克逸

doi:doi:10.11884/hplpb201830.180066

强激光与粒子束, 2018, 30 (8): 085102, 网络出版: 2018-08-21

同步辐射压弯镜重力补偿方法

Gravity compensation for bent mirror of synchrotron radiation

论文大纲

黄智超 ^*程建高李飞张磊王克逸

作者单位

中国科学技术大学精密机械与精密仪器系, 合肥 230026

压弯镜重力补偿力矩加多点力面型误差同步辐射 bent mirror gravity compensation couple combined with multi-point forces slope error synchrotron radiation

摘要

介绍了同步辐射压弯镜重力引起的面型斜率误差及评价标准。根据梁的弯曲理论，提出了力矩加多点力补偿重力的方法，以上海光源XAFS光束线(BL14W)中的压弯镜为例，计算出力矩加两点力、力矩加三点和力矩加四点力补偿的最小斜率均方根误差分别为0.092，0.041，0.022 μrad。补偿结果的对比表明，当镜子两端有力矩补偿时，各补偿力相应减小，力矩加两点力、力矩加三点力和力矩加四点力补偿的面型斜率误差分别为没有力矩补偿时的52%，61%，68%。力矩加多点力补偿重力的方法明显优于多点力补偿重力的方法。

Abstract

Slope error and evaluation criteria of bent mirror of synchrotron radiation induced from gravity are introduced. According to the bending theory of beam, a method of gravity compensation by couple combined with multi-point forces is proposed. Taking the bent mirror of the XAFS beam-line (BL14W) at Shanghai Synchrotron Radiation Facility (SSRF) as an example, the minimum root mean square (RMS) slope error of the bent mirror under the action of two-point, three-point and four-point forces combined with couples are calculated, and the result is 0.092, 0.041 and 0.022 μrad, respectively. The comparison between the compensation results shows that when a couple is applied to both ends of the mirror, the corresponding compensation forces decreases, and the slope errors of the couple combined with two-point, three-point and four-point forces are 52%, 61% and 68% of those without couples. Obviously, the compensation method of couples combined with multi-point forces is better than the multi-point forces compensation method.

参考文献

[1] 邓小国, 周泗忠, 熊仁生, 等. 超环面聚焦镜压弯装置的优化设计[J]. 光子学报, 2006, 35(5): 797-800. (Deng Xiaoguo, Zhou Sizhong, Xiong Rensheng, et al. A optimize design bending mechanism of torodial focusing mirror. Acta Photonica Sinica, 2006, 35(5): 797-800)

[2] 马礼敦. 同步辐射装置——上海光源及其应用[J]. 理化检验：物理分册, 2009, 45(11): 717-723. (Ma Lidun. Shanghai Synchrotron Radiation Facility and its application. Physical Testing & Chemical Analysis, 2009, 45(11): 717-723)

[3] Lü Qingtao, Xue Song, Zhu Wanqian, et al. Pull-rod bent focusing mirror subassembly engineering analysis based on contact nonlinear analysis method[C]//Proc of SPIE. 2009: 73850E.

[4] 吕清涛, 薛松, 彭忠琦, 等. 拉杆式压弯聚焦镜组件线性与接触非线性方法的比较[J]. 光学精密工程, 2010, 18(8): 1842-1848. (Lü Qingtao, Xue Song, Peng Zhongqi, et al. Comparison on linear and contact nonlinear analysis methods of pull-rod bent focusing mirror assembly. Optics and Precision Engineering, 2010, 18(8): 1842-1848)

[5] 黄志刚, 董晓浩, 高飞, 等. X射线衍射和散射光束线环面聚焦镜的面形精度与像差分析[J]. 光学精密工程, 2004, 12(1): 26-30. (Huang Zhigang, Dong Xiaohao, Gao Fei, et al. Slope error and aberration analysis for XRDX beamline toroidal focusing mirror. Optics and Precision Engineering, 2004, 12(1): 26-30)

[6] 卢启鹏, 高飒飒, 彭忠琦. 同步辐射水平偏转压弯镜面形误差分析与补偿[J]. 光学精密工程, 2011, 19(11): 2644-2650. (Lu Qipeng, Gao Sasa, Peng Zhongqi. Slope error analysis and compensation for synchrotron radiation horizontal deflexed mirror. Optics and Precision Engineering, 2011, 19(11): 2644-2650)

[7] Howells M R, Irick S C, Macdowell A A, et al. Theory and practice of elliptically bent X-ray mirrors[J]. Optical Engineering, 2000, 39(10):2748-2762.

[8] 孙福权, 傅远, 祝万钱,等. 压弯镜系统自重平衡多点调节方法的研究[J]. 核技术, 2011, 34(4): 246-250. (Sun Fuquan, Fu Yuan, Zhu Wanqian, et al. A study on multi-point gravity compensation of mirror bending system. Nuclear Techniques, 2011, 34(4): 246-250)

[9] Howells M R, Lunt D L. Design considerations for adjustable-curvature, high-power, X-ray mirrors based on elastic bending[J]. Optical Engineering, 1993, 32(8): 1981-1989.

[10] 周泗忠, 杨晓许, 时惠霞. 压弯聚焦镜自重的平衡[J]. 核技术, 2005, 28(3): 180-182. (Zhou Sizhong, Yang Xiaoxu, Shi Huixia. Study of gravity compensation of bent focusing mirror. Nuclear Techniques, 2005, 28(3): 180-182)

[11] 秦超, 薛松, 王楠, 等. 压弯椭圆柱面镜的有限元分析[J]. 核技术, 2018, 41(1): 5-10. (Qin Chao, Xue Song, Wang Nan, et al. The finite element analysis of the bent elliptical cylindrical mirror. Nuclear Techniques, 2018, 41(1): 5-10)

[12] 刘鸿文. 材料力学: 上册[M]. 5版. 北京：高等教育出版社, 1992: 218-219. (Liu Hongwen. Mechanics of materials: book one. 5th ed. Beijing: Higher Education Press, 1992: 218-219)

[13] 李庆祥, 王东生, 李玉和. 现代精密仪器设计[M]. 北京: 清华大学出版社, 2004: 64-65. (Li Qingxiang, Wang Dongsheng, Li Yuhe. Design of modern precision instruments. Beijing: Tsinghua University Press, 2004: 64-65)

黄智超, 程建高, 李飞, 张磊, 王克逸. 同步辐射压弯镜重力补偿方法[J]. 强激光与粒子束, 2018, 30(8): 085102. Huang Zhichao, Cheng Jian’gao, Li Fei, Zhang Lei, Wang Keyi. Gravity compensation for bent mirror of synchrotron radiation[J]. High Power Laser and Particle Beams, 2018, 30(8): 085102.

同步辐射压弯镜重力补偿方法

关于本站 Cookie 的使用提示

全站搜索

同步辐射压弯镜重力补偿方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索