PMMA激光辐照融化形貌和组织特征分析

为了深入研究聚甲基丙烯酸甲酯(PMMA)的CO2激光辐照融化特性, 依据热传导和能量守恒原理, 建立低功率 CO2激光辐照融化理论分析模型, 解析计算CO2激光辐照融化PMMA的激光参数阈值, 分析激光参数与温度变化相互关系, 采用数码显微系统、SEM扫描电镜和XRD分析仪, 测试分析PMMA试样的融化形貌和组织特征变化。结果表明, 激光功率密度31.8~47.7 W/cm2可以满足PMMA融化且不发生热分解, 实验结果与激光融化阈值理论计算基本相符, 可为PMMA的CO2激光融化机制及其成型工艺研究提供参考依据。

Abstract

In order to study the melting characteristics of polymethylmethacrylate(PMMA) by CO2 laser irradiation, according to the heat conduction and energy conservation principle, the theoretical model of PMMA melting was established by low-power CO2 laser radiation. The laser parameters threshold of PMMA melting was calculated and the relationship between sample temperature change and laser parameters was analyzed. By the use of digital microscopy systems, SEM and XRD instruments, the melt morphology and tissue features of PMMA sample were discussed. The results show that laser power density 31.8 to 47.7 W/cm2 could make PMMA melt and does not occur thermal decomposition, and the experimental results is consistent with the theoretical calculations of laser melting threshold, which provides reference for CO2 laser melting mechanism and molding technology of PMMA.

参考文献

[1] Bartnik A, Fiedorowicz H, Jarocki R, et al. Ablation and surface modifications of PMMA using a laser-plasma EUV source[J]. Appl Phys B, 2009, 96(9): 727-730.

[2] Serafetinides M A, Makropoulou E F. Ultrashort laser ablation of PMMA and intraocular lenses[J]. Appl Phys A, 2008, 93(11): 111-116.

[3] 雷剑波, 王镇, 王云山, 等. 激光透射焊接聚甲基丙烯酸甲酯试验研究[J]. 中国激光, 2013, 40(1): 0103006.

Lei Jianbo, Wang Zhen, Wang Yunshan, et al. Experiment Study of Laser Transmission Welding of Polymethacrylate[J]. Chinese J Lasers, 2013, 40(1): 0103006. (in Chinese)

[4] Mohammed M I, Abraham E, Desmulliez M P Y, et al. Rapid laser prototyping of valves for microfluidic autonomous systems[J]. J Micromech Microeng, 2013, 23(6): 035034.

[5] Yuan Dajun, Da Suman. Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation[J]. Journal of Applied Physics, 2007, 101(9): 024901.

[6] 相恒富, 傅建中, 陈子辰. 三维瞬态激光烧蚀聚合物微流道动态界面研究[J]. 浙江大学学报(工学版), 2007, 41(11): 1908-1912.

Xiang Hengfu, Fu Jianzhong, Chen Zichen. Dynamic interface for three-dimensional transient laser ablation polymer microchannels[J]. Journal of Zhejiang University(Engineering Science), 2007, 41(11): 1908-1912. (in Chinese)

[7] 申雪飞, 陈涛. CO2 激光直写PMMA 微通道工艺改进的实验研究[J]. 中国激光, 2011, 38(6): 0603030.

Shen Xuefei, Chen Tao. Improvement of processing technique of CO2 laser direct writing on PMMA microchannels[J]. Chinese J Lasers, 2011, 38(6): 0603030. (in Chinese)

[8] 谢小柱, 李力钧, 魏昕, 等. 有机玻璃激光气化切割前沿[J]. 中国激光, 2008, 35(6): 925-930.

Xie Xiaozhu, Li Lijun, Wei Xin, et al. Evaporative front of laser cutting PMMA[J]. Chinese J Lasers, 2008, 35(6): 925-930. (in Chinese)

[9] 谭文胜, 周建忠, 黄舒, 等. PMMA微结构件激光融化成型实验[J]. 中国激光, 2014, 41(7): 0703009.

Tan Wensheng, Zhou Jianzhong, Huang Shu, et al. Experiment of laser melting-forming for PMMA microstructure parts[J]. Chinese J Lasers, 2014, 41(7): 0703009. (in Chinese)

[10] 谭文胜, 周建忠, 朱炜立, 等. 微型塑料件激光融化成型数值模拟和实验[J]. 中国激光, 2015, 42(1): 0103004.

Tan Wensheng, Zhou Jianzhong, Zhu Weili, et al. Simulation and experiment of laser melting-forming for polymer micro component(PMC)[J]. Chinese J Lasers, 2015, 42(1): 0103004. (in Chinese)

[11] 李俊昌. 激光的衍射及热作用计算[M]. 北京: 科学出版社, 2008: 344-345.

Li Junchang. The Calculation of Laser Diffraction and Thermal Acting[M]. Beijing: Science Press, 2008: 344-345. (in Chinese)

谭文胜, 周建忠, 黄舒, 盛杰, 徐家乐. PMMA激光辐照融化形貌和组织特征分析[J]. 红外与激光工程, 2016, 45(12): 1206002. Tan Wensheng, Zhou Jianzhong, Huang Shu, Sheng Jie, Xu Jiale. Analysis on melting morphology and tissue features of PMMA laser irradiation[J]. Infrared and Laser Engineering, 2016, 45(12): 1206002.

PMMA激光辐照融化形貌和组织特征分析

关于本站 Cookie 的使用提示

全站搜索

PMMA激光辐照融化形貌和组织特征分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索