DC与CC 5052铝合金冷轧后沿厚度方向织构分布状态对比的X射线衍射分析
[1] Liu W C, Radhakrishnan B, Li Z, et al. Materials Science and Engineering A, 2008, 472: 170.
[2] Zhao Y M, Liu W C, Morris J G. Materials Science and Technology, 2003, 19: 1379.
[3] Zhao Y M, Morris J G. Metallurgical and Materials Transactions A, 2005, 36A: 2505.
[4] Liu W C, Morris J G. Scripta Materialia, 2005, 52: 1317.
[5] Liu W C, Morris J G. Metall. Mater. Trans. A, 2004, 35: 265.
[6] Liu W C, Man C S, Raabe D, et al. Scripta Materialia, 2005, 53: 1273.
[7] Liu J T, Morris J G. Metallurgical and Materials Transactions A, 2003, 34A: 951.
[8] Chen M B, Li J, Zhao Y M, et al. Materials Characterization, 2011, 62: 1188.
[9] Liu W C, Radhakrishnan B, Li Z. Materials Science and Engineering A, 2008, 472: 170.
[11] Mishin O V, Bay B, Juul J D. Metallurgical and Materials Transactions A, 2000, 31: 1653.
[12] Mishin O V, Bay B, Winther G, et al. Acta Materiala, 2004, 52: 5761.
[13] Mishin O V, Bay B, Juul Jensen D. Metallurgical and Materials Transactions A, 2000, 31: 1653.
[14] Bunge H J. Texture Analysis in Materials Science. London: Butterworths, 1982.
[15] MAO Wei-min, YANG Ping, CHEN Leng(毛卫民, 杨平, 陈冷). Principle of Technology of Materials Texture Analysis and Texture Inspect(材料织构分析原理与检测技术). Beijing: Publishing of Metallurgy(北京: 冶金出版社), 2008. 21.
[16] LI Quan, TANG Guang-bo, LIU Zheng-dong, et al(李权, 唐广波, 刘正东, 等). Acta Iron and Steel Research Sinica(钢铁研究学报), 2007, 19(6): 53.
陈明彪, 马旻, 杨庆祥, 王珊, 刘文昌, ZHAO Ying-mei. DC与CC 5052铝合金冷轧后沿厚度方向织构分布状态对比的X射线衍射分析[J]. 光谱学与光谱分析, 2013, 33(9): 2574. CHEN Ming-biao, MA Min, YANG Qing-xiang, WANG Shan, LIU Wen-chang, ZHAO Ying-mei. Comparison of Texture Distribution of Cold Rolled DC and CC AA 5052 Aluminum Alloy at Different Positions through Thickness Direction by XRD[J]. Spectroscopy and Spectral Analysis, 2013, 33(9): 2574.