倾斜基体对激光熔覆能量分布的影响研究
李海波, 李涛, 王鑫林, 徐海岩, 张洪潮. 倾斜基体对激光熔覆能量分布的影响研究[J]. 应用激光, 2017, 37(3): 333.
Li Haibo, Li Tao, Wang Xinlin, Xu Haiyan, Zhang Hongchao. Study on the Influence of the Inclined Substrate to the Energy Distribution of Laser Cladding[J]. APPLIED LASER, 2017, 37(3): 333.
[1] 洪蕾, 吴钢.激光制造技术基础[M].1版.北京: 人民交通出版社, 2008.
[2] 李强, 欧阳家虎, 雷廷权, 等.材料表面激光熔覆研究进展[J].材料科学与工艺, 1996(4): 22-36.
[3] VILAR R M.Laser cladding[J].International Society for Optics and Photonics, 1999, 11(2): 385-392.
[4] 李成功.新材料研究发展与产业化趋势[J].中国机械工程, 2000(1): 0154-0156.
[5] 吴新伟, 曾晓雁, 朱蓓蒂.激光熔覆金属陶瓷技术研究概况[J].金属热处理, 1996(4): .
[6] CHEIKH H E, COURANT B, BRANCHU S, et al.Analysis and prediction of single laser channels geometrical characteristics in coaxial laser cladding process[J].Optics & Lasers in Engineering, 2012, 50(3): 413-422.
[7] LALAS C, TSIRBAS K, SALONITIS K, et al.An analytical model of the laser clad geometry[J].International Journal of Advanced Manufacturing Technology, 2007, 32(1): 34-41.
[8] 倪立斌, 刘继常, 伍耀庭, 等.基于神经网络和粒子群算法的激光熔覆工艺优化[J].中国激光, 2011, 38(2): 93-98.
[9] 张庆茂, 王忠东, 刘喜明, 等.工艺参数对送粉激光熔覆层几何形貌的影响[J].焊接学报, 2000, 21(2): 43-46.
[10] 张庆茂, 王忠东, 刘喜明, 等.工艺参数对送粉激光熔覆层几何形貌的影响[J].焊接学报, 2000, 21(2): 43-46.
[11] 刘昊, 虞钢, 何秀丽, 等.送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟[J].中国激光, 2013, 40(12): 78-85.
[12] LIN J, HWANG B C.Coaxial laser cladding on an inclined substrate[J].Optics & Laser Technology, 1999, 31(8): 571-578.
[13] PAUL C P, MISHRA S K, KUMAR A, et al.Laser rapid manufacturing on vertical surfaces: Analytical and experimental studies[J].Surface & Coatings Technology, 2013, 224(12): 18-28.
[14] 朱刚贤, 石世宏, 傅戈雁, 等.基于激光加工机器人的光内送粉变基面熔覆研究[J].中国激光, 2015(3): 106-111.
[15] CHRYSSOLOURIS G, ZANNIS S, TSIRBAS K, et al.On laser cladding: Proceedings of the 34th international CIRP seminar on manufacturing systems[C]. Athens: s.n. 2001: 371-380.
[16] KONIG W E, ROZSNOKI L, KIRNER P.Laser beam surface treatment-is wear no longer the bug bear of old: Mordike BL (ed) 4th European conference of laser treatment of materials[C]. Gttingen, \[s.n.\]: 1992: 217-222.
[17] 黄卫东.激光立体成形[M].西安: 西北工业大学出版社, 2007.
[18] HAN L, LIOU F W.Numerical investigation of the influence of laser beam mode on melt pool[J].International Journal of Heat & Mass Transfer, 2004, 47(s 19-20): 4385-4402.
[19] 牛建强.同轴送粉光纤激光增材制造激光与粉末相互作用机理研究[D].北京: 北京工业大学, 2014.
李海波, 李涛, 王鑫林, 徐海岩, 张洪潮. 倾斜基体对激光熔覆能量分布的影响研究[J]. 应用激光, 2017, 37(3): 333. Li Haibo, Li Tao, Wang Xinlin, Xu Haiyan, Zhang Hongchao. Study on the Influence of the Inclined Substrate to the Energy Distribution of Laser Cladding[J]. APPLIED LASER, 2017, 37(3): 333.
PDF全文
