倾斜基体对激光熔覆能量分布的影响研究

李海波; 李涛; 王鑫林; 徐海岩; 张洪潮

doi:doi:10.14128/j.cnki.al.20173703.333

应用激光, 2017, 37 (3): 333, 网络出版: 2017-08-30

倾斜基体对激光熔覆能量分布的影响研究

Study on the Influence of the Inclined Substrate to the Energy Distribution of Laser Cladding

论文大纲

李海波 ^*李涛王鑫林徐海岩张洪潮

作者单位

大连理工大学机械工程学院, 辽宁大连 116024

激光熔覆倾斜基体激光功率密度分布米氏散射理论 laser cladding incline substrate effective laser power density distribution Mie scattering theory

摘要

为了探究倾斜基体激光熔覆中基体表面能量的分布规律, 利用米氏散射理论法建立了倾斜基体表面上的激光功率密度分布的数学模型, 以及激光功率密度峰值和峰值偏移量的数学模型。结果表明, 随着倾斜角度的增加, 激光功率密度会逐渐减小, 并且减小幅度逐渐增大; 激光功率密度峰值会发生偏移, 偏移量也随着倾斜角度的增加而增加, 且幅度逐渐增大。用试验对模拟结果进行验证, 获得的规律是一致的。

Abstract

In order to explore the distribution of the energy of the inclined substrate surface during the laser cladding process, this paper established the mathematical model of the effective laser power density distribution, the effective laser power density peak and the peak offset, by using Mie scatting theory method. The results show that with the increase of the inclination angle, the effective power density decreases gradually, while the amplitude increases gradually. The peak shift amount of the effective power density increases with the increase of the inclination angle, so as the amplitude. The simulation results are verified by experiments, and consistent rules are obtained.

参考文献

[1] 洪蕾, 吴钢.激光制造技术基础[M].1版.北京: 人民交通出版社, 2008.

[2] 李强, 欧阳家虎, 雷廷权, 等.材料表面激光熔覆研究进展[J].材料科学与工艺, 1996(4): 22-36.

[3] VILAR R M.Laser cladding[J].International Society for Optics and Photonics, 1999, 11(2): 385-392.

[4] 李成功.新材料研究发展与产业化趋势[J].中国机械工程, 2000(1): 0154-0156.

[5] 吴新伟, 曾晓雁, 朱蓓蒂.激光熔覆金属陶瓷技术研究概况[J].金属热处理, 1996(4): .

[6] CHEIKH H E, COURANT B, BRANCHU S, et al.Analysis and prediction of single laser channels geometrical characteristics in coaxial laser cladding process[J].Optics & Lasers in Engineering, 2012, 50(3): 413-422.

[7] LALAS C, TSIRBAS K, SALONITIS K, et al.An analytical model of the laser clad geometry[J].International Journal of Advanced Manufacturing Technology, 2007, 32(1): 34-41.

[8] 倪立斌, 刘继常, 伍耀庭, 等.基于神经网络和粒子群算法的激光熔覆工艺优化[J].中国激光, 2011, 38(2): 93-98.

[9] 张庆茂, 王忠东, 刘喜明, 等.工艺参数对送粉激光熔覆层几何形貌的影响[J].焊接学报, 2000, 21(2): 43-46.

[10] 张庆茂, 王忠东, 刘喜明, 等.工艺参数对送粉激光熔覆层几何形貌的影响[J].焊接学报, 2000, 21(2): 43-46.

[11] 刘昊, 虞钢, 何秀丽, 等.送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟[J].中国激光, 2013, 40(12): 78-85.

[12] LIN J, HWANG B C.Coaxial laser cladding on an inclined substrate[J].Optics & Laser Technology, 1999, 31(8): 571-578.

[13] PAUL C P, MISHRA S K, KUMAR A, et al.Laser rapid manufacturing on vertical surfaces: Analytical and experimental studies[J].Surface & Coatings Technology, 2013, 224(12): 18-28.

[14] 朱刚贤, 石世宏, 傅戈雁, 等.基于激光加工机器人的光内送粉变基面熔覆研究[J].中国激光, 2015(3): 106-111.

[15] CHRYSSOLOURIS G, ZANNIS S, TSIRBAS K, et al.On laser cladding: Proceedings of the 34th international CIRP seminar on manufacturing systems[C]. Athens: s.n. 2001: 371-380.

[16] KONIG W E, ROZSNOKI L, KIRNER P.Laser beam surface treatment-is wear no longer the bug bear of old: Mordike BL (ed) 4th European conference of laser treatment of materials[C]. Gttingen, \[s.n.\]: 1992: 217-222.

[17] 黄卫东.激光立体成形[M].西安: 西北工业大学出版社, 2007.

[18] HAN L, LIOU F W.Numerical investigation of the influence of laser beam mode on melt pool[J].International Journal of Heat & Mass Transfer, 2004, 47(s 19-20): 4385-4402.

[19] 牛建强.同轴送粉光纤激光增材制造激光与粉末相互作用机理研究[D].北京: 北京工业大学, 2014.

李海波, 李涛, 王鑫林, 徐海岩, 张洪潮. 倾斜基体对激光熔覆能量分布的影响研究[J]. 应用激光, 2017, 37(3): 333. Li Haibo, Li Tao, Wang Xinlin, Xu Haiyan, Zhang Hongchao. Study on the Influence of the Inclined Substrate to the Energy Distribution of Laser Cladding[J]. APPLIED LASER, 2017, 37(3): 333.

倾斜基体对激光熔覆能量分布的影响研究

关于本站 Cookie 的使用提示

全站搜索

倾斜基体对激光熔覆能量分布的影响研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索