强激光与粒子束, 2020, 32 (10): 105001, 网络出版: 2020-11-11   

气体火花开关电极烧蚀研究综述 下载: 617次

Review of the research on electrode erosion of gas spark switch
作者单位
1 湘潭大学 材料科学与工程学院,湖南 湘潭 411105
2 强脉冲辐射环境模拟与效应国家重点实验室,西安 711024
引用该论文

罗城, 丛培天, 张天洋, 罗维熙. 气体火花开关电极烧蚀研究综述[J]. 强激光与粒子束, 2020, 32(10): 105001.

Cheng Luo, Peitian Cong, Tianyang Zhang, Weixi Luo. Review of the research on electrode erosion of gas spark switch[J]. High Power Laser and Particle Beams, 2020, 32(10): 105001.

参考文献

[1] 刘锡三. 高功率脉冲功率技术[M]. 北京: 国防工业出版社, 2005.Liu Xisan. High pulsed power technology[M]. Beijing: National Defense Industry Press, 2005

[2] Bluhm H. 脉冲功率系统的原理与应用[M]. 北京: 清华大学出版社, 2008.Bluhm H. Pulsed power systems: principles applications[M]. Beijing: Tsinghua University Press, 2008

[3] Li Xiaoang, Liu Xuandong, Gou Xuanqi, et al. Degradation of performance due to electrode erosion in field distortion gas switch in long-term repetitive operation[J]. IEEE Transactions on Plasma Science, 2014, 42(10): 3064-3069.

[4] 李晓昂, 刘轩东, 曾凡辉, 等. 电极熔蚀导致的气体开关绝缘子性能劣化[J]. 强激光与粒子束, 2016, 26:085004. (Li Xiaoang, Liu Xuandong, Zeng Fanhui, et al. Degradation of gas switch insulator due to electrode erosion[J]. High Power Laser and Particle Beams, 2016, 26: 085004

[5] Li Xiaoang, Liu Xuandong, Zeng Fanhui, et al. Ejection of electrode molten droplet and its effect on the degradation of insulator in gas spark switches[J]. IEEE Transactions on plasma science, 2015, 43(4): 1049-1053.

[6] 谢昌明, 谈效华, 杜涛, 等. 大电流放电条件下气体火花开关电性能研究[J]. 高压电器, 2014, 50(12):36-40. (Xie Changming, Tan Xiaohua, Du Tao, et al. Investigation on electrical performances of gas spark gaps in high current discharge[J]. High Voltage Apparatus, 2014, 50(12): 36-40

[7] 刘轩东, 沈曦, 李晓昂, 等. 脉冲作用下气体火花开关电极熔蚀研究[J]. 高电压技术, 2017, 43(9):3070-3077. (Liu Xuandong, Shen Xi, Li Xiaoang, et al. Researches on electrode erosion of gas spark switch under pulsed current[J]. High Voltage Engineering, 2017, 43(9): 3070-3077

[8] Zingerman A S. The effect of thermal conductivity upon the electrical erosion of metals[J]. Soviet Physics—technical Physics, 1956, 1(9): 1945-1958.

[9] Donaldson A L. Electrode erosion in highcurrent, highenergy transient arcs[D]. Lubbock, USA: Texas Tech University, 1991.

[10] Donaldson A L, Kristiansen M. Electrode erosion as a function of electrode materials in high current, high energy transient arcs[C]Monterey: Pulsed Power Conference, 1989: 8386.

[11] Belkin G S. Dependence of electrode erosion on heat flux and duration of current flow[J]. Soviet Physics Technical Physics-Ussr, 1971, 15(7): 1167-1170.

[12] Zingerman A S. The effect of thermal conductivity upon the electrical erosion of metals[J]. Soviet Physics—Technical Physics, 1956, 1(9): 1945-1958.

[13] Zingerman A S. The role of Joule-Lenz heat effect in the electrical erosion of metals[J]. Zhurnal Tekhnicheskoi Fiziki, 1955, 25(11): 1931-1943.

[14] DonaldsonA L, Kristiansn M, Watson A, et al. Electrode erosion in high current, high energy transient arcs[J]. IEEE Transactions on Magnetics, 1986, 22(6): 1441-1447.

[15] 王虎. 三电极场畸变气体火花开关电极烧蚀特性及寿命预测[D]. 西安: 西安交通大学, 2011.Wang Hu. Electrode erosion acteristics failure prediction of threeelectrode field disttion gas spark switch[D]. Xi’an: Xi’an Jiaotong University, 2011

[16] Gordon L B, Kristiansen M, Hagler M O, et al. Material studies in a high energy spark gap[J]. IEEE Transactions on Plasma Science, 1983, 10(4): 286-293.

[17] Behrisch R. Surface erosion from plasma materials interaction[J]. Journal of Nuclear Materials, 1979, 85/86: 1047-1061.

[18] Watson A, Donaldson A L, Ikuta K, et al. Mechanism of electrode surface damage and material removal in high current discharges[J]. IEEE Transactions on Magnetics, 1986, 22(6): 1799-1803.

[19] 何孟兵, 贺臣, 李劲. 气体火花开关电极的烧蚀研究[J]. 高电压技术, 2004, 30(10):54-55. (He Mengbing, He Chen, Li Jin. Research on erosion of gas spark switch electrodes[J]. High Voltage Engineering, 2004, 30(10): 54-55

[20] Peters J, Yin F, Borges C F M, et al. Erosion mechanisms of hafnium cathodes at high current[J]. Journal of Physics D: Applied Physics, 2005, 38(11): 1781-1794.

[21] Lehr F M, Kristiansen M. Electrode erosion from high current moving arcs[J]. IEEE Transactions on Plasma Science, 1989, 17(5): 811-817.

[22] Donaldson A L, Kristiansen M. Utilization of a thermal model to predict electrode erosion parameters of engineering imptance[C]IEEE Conference Recd of the 1990 Nieenth Power Modulat Symposium.1990: 265269.

[23] Cramer K, Roman W. Electrode design based in transient thermal analysis[J]. Mechanical Engineering, 1970, 92(5): 75-79.

[24] Belkin G S, Kiselev V Y. Electrode erosion in pulsed high-current discharges[J]. Soviet physics Technical physics, 1966, 11(2): 280-286.

[25] 罗敏, 江金生, 常安碧, 等. 高功率气体火花开关电极烧蚀机理研究[J]. 强激光与粒子束, 2004, 16(6):781-786. (Luo Min, Jiang Jinsheng, Chang Anbi, et al. Study on mechanism of electrode erosion of high-power gas spark gap switch[J]. High Power Laser and Particle Beams, 2004, 16(6): 781-786

[26] Wang H, Zhang Q, Wei J, et al. Research on erosion property of field-distortion gas switch electrode in nanosecond pulse[J]. IEEE Transactions on Plasma Science, 2012, 40(6): 1733-1742.

[27] 陈维青, 曾正中, 邹丽丽, 等. 100 kA微秒级气体火花开关电极喷射现象研究[J]. 强激光与粒子束, 2004, 16(1):98-100. (Chen Weiqing, Zeng Zhengzhong, Zou Lili, et al. Selection of gas spark gaps electrode material under microsecond 100 kA current pulse[J]. High Power Laser and Particle Beams, 2004, 16(1): 98-100

[28] Yao Xueling, Zeng Zhengzhong, Chen Jinliang. Electrode erosion of a high energy impulse spark gap switch[J]. Plasma Science and Technology, 2006, 7(6): 3157.

[29] 罗维熙, 黄涛, 曾江涛. 间隙长度对气体火花开关静态性能的影响[J]. 强激光与粒子束, 2013, 28(9):2466-2470. (Luo Weixi, Huang Tao, Zeng Jiangtao. Influence of gap length on gas spark switch static performance[J]. High Power Laser and Particle Beams, 2013, 28(9): 2466-2470

[30] 黄涛, 罗维熙, 丛培天, 等. 不同电流下气体开关电极烧蚀特性实验研究[J]. 强激光与粒子束, 2014, 26:045042. (Huang Tao, Luo Weixi, Con Peitian, et al. Experimental study on electrode erosion characteristics of spark gas switch under different current[J]. High Power Laser and Particle Beams, 2014, 26: 045042

[31] Lide D R. Lge’s hbook of chemistry[M]. Boca Raton: CRC Press, 2004.

[32] Nieh T G, Wadsworth J, Witenauer J P. Tungsten and its alloys[J]. Advanced Materials & Processer(USA), 1992, 142(3): 28-33.

[33] Budin A V, Kolikov V A, Rutberg F G. Influence of the current magnitude and working gas temperature on electrode erosion in the discharge chambers of high-power pulsed plasmatrons[J]. Technical Physics, 2007, 52(8): 1011-1015.

[34] 谢昌明, 谈效华, 杜涛, 等. 气体火花开关电极烧蚀研究[J]. 强激光与粒子束, 2014, 26:015003. (Xie Changming, Tan Xiaohua, Du Tao, et al. Electrode erosion research of gas spark gap[J]. High Power Laser and Particle Beams, 2014, 26: 015003

[35] Koutsoubis J M, Macgregor S J. Electrode erosion and lifetime performance of a high repetition rate, triggered, corona-stabilized switch in air[J]. Journal of Physics D: Applied Physics, 2000, 33(9): 1093-1103.

[36] 刘瑜, 陈林, 戴英敏, 等. LTD模块气体开关电极材料烧蚀性能实验[J]. 强激光与粒子束, 2014, 26:085005. (Liu Yu, Chen Lin, Dai Yingmin, et al. Electrode erosion performance test of LTD stage gas spark switches[J]. High Power Laser and Particle Beams, 2014, 26: 085005

[37] 白峰, 邱毓昌, 姜惟. 气体火花开关电极材料的冲击电流侵蚀特性[J]. 电工技术学报, 2001, 16(4):76-79. (Bai Feng, Qiu Yuchang, Jiang Wei. Erosion characteristics of the electrodes used for gas spark gap[J]. Transactions of China Electrotechnical Society, 2001, 16(4): 76-79

[38] Wang B J, Saka N. Thermal analysis of electrode heating and melting due to a spark[J]. IEEE Transactions on Components, Hybrids, and Manufacturing, Technology, 1993, 16(4): 456-466.

[39] Budin A V, Pinchuk M E, Kuznetsov V E, et al. The influence of the production technology of iron-copper composite alloy on its erosion properties in a high-current high-pressure arc[J]. Technical Physics Letters, 2014, 40(12): 1061-1064.

[40] Budin A V, Pinchuk M E, Kurakina N K. Erosion characteristics of copper-based composite electrodes in an electric arc of variable length with transverse gas blowing[J]. Technical Physics Letters, 2018, 44(9): 808-810.

[41] Liu Yiwen, Zhang Chengyu, Qiao Shengru, et al. Characteristics of arc erosion for Cu-C composite materials in air[J]. Modern Physics letters B, 2009, 23(27): 3281-3287.

[42] Li Lee, Ren Shuai, Dai Hongyu, et al. Effect of 100-nm Al2O3 particle inclusions on 100-kA pulsed arc erosion of W–Cu electrodes[J]. IEEE Transactions on Plasma Science, 2020, 48(1): 228-236.

[43] 吴佳玮. 大电流钨镍铁合金两电极气体火花开关研究[D]. 西安: 西安交通大学, 2018.Wu Jiawei. Study on highcurrent twoelectrode WNiFe alloy gas spark switch[D]. Xi’an: Xi’an Jiaotong University, 2018

[44] 罗维熙, 丛培天, 孙铁平, 等. 电极材料对气体火花开关静态性能的影响[J]. 强激光与粒子束, 2016, 28:015022. (Luo Weixi, Cong Peitian, Sun Tieping, et al. Influence of electrode materials on static performance of gas spark switch[J]. High Power Laser and Particle Beams, 2016, 28: 015022

罗城, 丛培天, 张天洋, 罗维熙. 气体火花开关电极烧蚀研究综述[J]. 强激光与粒子束, 2020, 32(10): 105001. Cheng Luo, Peitian Cong, Tianyang Zhang, Weixi Luo. Review of the research on electrode erosion of gas spark switch[J]. High Power Laser and Particle Beams, 2020, 32(10): 105001.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!