[1] WILSON S R,MCNEIL J R.Neutral ion beam figuring of large optical surfaces[J].SPIE,1987,818:320-324.

[2] WILSON S R,REICHER D W,MCNEIL J R.Surface figuring using neutral ion beams[J].SPIE,1988,966:74-81.

[3] ALLEN L N,ROBERT E K,TIMOTHY S L.Surface error correction of a Keck 10 m telescope primary mirror segment by ion figuring[J].SPIE,1991,1531:192-204.

[4] ALLEN L N.Progress in ion figuring large optics[J].SPIE,1994,2428:237-247.

[5] FRUIT M,SCHINDLER A,HANSEL T.Ion beam figuring of SiC mirrors provides ultimate WFE performances for any type of telescope[J].SPIE,1999,3739:142-154.

[6] GAILLY P,COLLETTE J P,TOCK J P,et al..Ion beam figuring of small BK7 and Zerodur optics:thermal effects[C].THE EUROPTO Conference on Optical Fabrication and Testing,Berlin,Germany,1999.

[7] TOCK J P,COLLETTE J P,GAILLY P,et al..Figuring sequences on a super-smooth sample using ion beam technique[C].THE EUROPTO Conference on Optical Fabrication and Testing,Berlin,Germany,2000.

[8] CARNAL C L,EGERT C M,HYLTON K W.Advanced matrix-based algorithm for ion beam milling of optical components[J].SPIE,1992,1752:54-62.

[9] 王孝坤,张学军,王丽辉,等.环形子孔径拼接干涉检测非球面的数学模型和仿真研究[J].光学精密工程,2006,14(4):527-532.WANG X K,ZHANG X J,WANG L H,et al..Mathematical mode and simulation for testing aspheric surface by annular subaperture stitching interferometry[J].Opt.Precision Eng.,2006,14(4):527-532.(in Chinese)

[10] 牛海燕,张学军.∮124口径碳化硅质非球面镜面数控研抛技术研究[J].光学精密工程,2006,14(4):539-544.NIU H Y,ZHANG X J.Research on computer controlled polishing technology of ∮124 mm aspheric reaction-burned silicon carbide mirror[J].Opt.Precision Eng.,2006,14(4):539-544.(in Chinese)

[11] 侯溪,伍凡,杨力,等.环形子孔径拼接检测大口径非球面镜的规划模型及分析[J].光学精密工程,2006,14(2):207-212.WU X,WU F,YANG L,et al..Layout model and analysis of subaperture stitching technique for testing large aspheric mirror[J].Opt.Precision Eng.,2006,14(2):207-212.(in Chinese)

[12] 彭小强,戴一帆,李圣怡,等.基于矩阵的回转对称非球面磁流变抛光驻留时间算法研究[J].国防科技大学学报,2004,26(3):89-92.PENG X Q,DAI Y F,LIS Y,et al..Dwell time algorithm for MRF of aixs-symmetrical aspherical parts[J].J.Natl.Univ.Def.Technol.,2004,26(3):89-92.(in Chinese)

[13] 王贵林.SiC光学材料超精密研抛关键技术研究[D].长沙:国防科技大学博士论文,2002.WANG G L.A study on key techniques in ultra-precision lapping and polishing for optical SiC materials[D].National University of Defense Technology,Changcha,2002.(in Chinese)

[14] 邹谋炎.反卷积和信号复原[M].北京:国防工业出版社,2001.ZHOU M Y.Deconvolution and signal recovery[M].Beijing:National Defense Industrial Press,2001.(in Chinese)

[15] 李睿凡,郭学彬,瞿安连.基于奇值分解的三维光学切片显微图像恢复算法研究[J].光学精密工程,2001,9(3):212-215.LI R F,GUO X L,QUA L.Image restoration algorithms based on singular value decomposition of 3-D optical sectioning microscopy[J].Opt.Precision Eng.,2001,9(3):212-215.(in Chinese)

[16] 成礼智,王红霞,罗永.小波的理论与应用[M].北京:科学出版社,2004.CHEN L Z,WANG H X,LUO Y.Theory and application of wavelet[M].Beijing:Science Press,2004.(in Chinese)

[17] 许树新,赵继,王洪刚.自由曲面数控加工中刀具破损的小波分析[J].光学精密工程,2000,8(4):360-364.XU S X,ZHAO J,WANG H G.Analysis of tool breakage in CNC manufacturing using wavelet transform[J].Opt.Precision Eng.,2000,8(4):360-364.(in Chinese)