高硬度铁基熔覆层组织、成分及耐蚀性

通过在45#钢表面激光熔覆SDFe55合金粉末，制备高硬度(850 HV0.2)铁基涂层，采用扫描电镜(SEM)、X射线衍射(XRD)、电子探针(EPMA)以及腐蚀实验设备研究激光熔覆层组织、成分及耐蚀性。结果表明，激光熔覆铁基涂层成型性良好，无裂纹、气孔等缺陷，熔覆层与基体呈冶金结合，由γ(Fe，Ni)和M23C6型碳化物组成。由于大量奥氏体组织、致密细小的枝晶的生成以及碳化物的弥散分布，使激光熔覆层的耐蚀性较45#钢提高。此外，熔覆层晶界处Fe元素含量略低，Cr、Mo元素在晶界处含量略高于晶内，Ni元素在整个熔覆层中均匀分布，合金元素成分分布相对均匀对熔覆层的韧性和耐蚀性起到积极作用。

Abstract

SDFe55 alloy coating with high hardness (850 HV0.2) is prepared on the surface of piston by laser cladding. The structure, composition and corrosion resistance are studied by means of scanning electron microscope (SEM), X-ray diffraction (XRD), electron probe micro analysis (EPMA) and corrosion testing. The results show that laser cladding Fe-based coating is uniform without cracks and pores, has metallurgical bonding with the matrix, and is composed by γ(Fe, Ni) and carbides of type M23C6 . The corrosion resistance is higher than that of 45# steel due to combined effects of formation of austenite structure and refined dendrites, as well as disperse distribution of carbides. Moreover, composition distribution in the laser cladding layer is average, and the content of Fe element at the grain boundary is lower, and those of Cr, Mo elements at the boundary are higher than inside grain, while Ni element distributes homogeneously in the whole layer, which is beneficial to the improvement of ductility and corrosion resistance.

参考文献

[1] 刘济宁, 骆宏骞, 蒲容春等. F-2200HL钻井泵易损件可靠性实验研究［J］. 石油机械, 2008, 36(9): 4～5, 9

Liu Jining, Luo Hongqian, Pu Rongchun et al.. Expermiental study of reliability of easily-worn parts on F-2200HL drilling pump［J］. China Petroleum Machinery, 2008, 36(9): 4～5, 9

[2] 李志远, 赵伟毅, 古文全等. Ti对Co基合金激光熔覆层组织与性能的影响［J］. 中国激光, 2010, 37(8): 2086～2091

Li Zhiyuan, Zhao Weiyi, Gu Wenquan et al.. Effect of Ti on microstructure and properties of Co-based alloy coating by laser cladding［J］. Chinese J. Lasers, 2010, 37(8): 2086～2091

[3] Shengfeng Zhou, Xiaoqin Dai. Microstructure evolution of Fe-based WC composite coating prepared by laser induction hybrid rapid cladding［J］. Appl. Surf. Sci., 2010, 256(24): 7395～7399

[4] 杨胶溪, 刘华东. U71Mn钢轨表面激光熔覆Fe基合金组织与性能研究［J］. 铁道工程学报, 2010, (7): 34～38

Yang Jiaoxi, Liu Huadong. Research on the microstructure and properties of laser cladding Fe-base alloy on U71Mn rail surface［J］. J. Railway Engineering Society, 2010, (7): 34～38

[5] 韩彬, 李美艳, 王勇. 激光熔覆铁基合金涂层的高温氧化性能［J］. 中国激光, 2011, 38(8): 0803009

Han Bin, Li Meiyan, Wang Yong. High-temperature oxidation properties of Fe-based alloy coating prepared by laser cladding［J］. Chinese J. Lasers, 2011, 38(8): 0803009

[6] Meiyan Li, Yong Wang, Bin Han et al.. Microstructure and properties of high chrome steel roller after laser surface melting［J］. Appl. Surf. Sci., 2009, 255(17): 7574～7579

[7] S. B. Lalvani, G. Zhang. The corrosion of carbon steel in a chloride environment due to periodic voltage modulation: part I［J］. Corrosion Science, 1995, 37(10): 1567～1582

[8] C. T. Kwok, K, H. Lo, F. T. Cheng et al.. Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel［J］. Surf. Coat. Technol., 2003, 166(2-3): 221～230

李美艳, 韩彬, 高宁, 王勇, 潘蛟亮. 高硬度铁基熔覆层组织、成分及耐蚀性[J]. 中国激光, 2013, 40(5): 0503003. Li Meiyan, Han Bin, Gao Ning, Wang Yong, Pan Jiaoliang. Microstructure, Composition and Corrosion Resistance of Laser Cladding Fe-Based Coatings with High Hardness[J]. Chinese Journal of Lasers, 2013, 40(5): 0503003.

高硬度铁基熔覆层组织、成分及耐蚀性

关于本站 Cookie 的使用提示

全站搜索

高硬度铁基熔覆层组织、成分及耐蚀性

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索