[1] 温诗铸．摩擦学原理［M］．北京:清华大学出版社,1990．

[2] 王霄,夏立齐,高传玉,等．表面微造型技术改善物体表面摩擦性能的研究［J］．润滑与密封,2006(4):167-170．

[3] NAKATSUJI T,MORI A．The tribological effect of mechanically produced micro-dents by a micro diamond pyramid on medium carbon steel surfaces in rolling-sliding contact［J］．Meccanica,2001,36(6):663-674．

[4] ZHOU L,KATO K,VURENS G,et al．The effect of slider surface texture on flyability and lubricant migration under near contact conditions［J］．Tribology International,2003,36(4): 269-277．

[5] WAKUDA M,YAMAUCHI Y,KANZAKI S,et al．Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact［J］．Wear,2003,254(3):356-363．

[6] ZHANG W,YAO Y L．Micro scale laser shock processing of metallic components［J］．Journal of manufacturing Science and Engineering,2002,124(2):369-378．

[7] ZHANG W,Yao Y L,NOYAN I C,et al．Microscale laser shock peening of thin films, part 2:high spatial resolution material characterization［J］．Journal of Manufacturing Science & Engineering,2004,126(1):18-24．

[8] CHEN H,WANG Y,KYSAR J W,et al．Advances in microscale laser shock peening［J］．Tsinghua Science and Technology,2004,9(5):506-518．

[9] 宋起飞,周宏,李跃,等．仿生非光滑表面铸铁材料的常温摩擦磨损性能［J］．摩擦学学报,2006,26(1):24-26．

[10] 符永宏,杨巍,张华伟,等．激光微造型凸轮副的摩擦磨损［J］．农业机械学报,2010,41(1):216-220．

[11] KIM B,CHAE Y H,CHOI H S．Effects of surface texturing on the frictional behavior of cast iron surfaces［J］．Tribology International,2014(70):128-135．

[12] GUO Y B,CASLARU R．Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti-6Al-4V surfaces［J］．Journal of Materials Processing Technology,2011(211):729-736．

[13] 杨建风,周建忠,冯爱新．激光冲击强化区的残余应力测试分析［J］．应用激光,2006, 26(3):157-159．

[14] CHU J P,RIGSBEE J M,BANAS G,et al．Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel［J］．Materials Science and Engineering A,1999,260(1):260-268．

[15] GANIN E,KOMEM Y,ROSEN A．Shock induced hardness in α-iron［J］．Materials Science and Engineering,1978,33(1):1-4．