激光修整青铜金刚石砂轮石墨变质层的研究
陈根余, 陈冲, 卜纯, 贾天阳, 余春荣. 激光修整青铜金刚石砂轮石墨变质层的研究[J]. 中国激光, 2012, 39(3): 0303006.
Chen Genyu, Chen Chong, Bu Chun, Jia Tianyang, Yu Chunrong. Research on Carbonized Layer for Truing and Dressing of Bronze-Bonded Diamond Grinding Wheels with Laser[J]. Chinese Journal of Lasers, 2012, 39(3): 0303006.
[1] 康仁科, 原京庭, 史兴宽 等. 超硬磨料砂轮的激光修锐技术研究[J]. 中国机械工程, 2000, 11(5): 493~496
Kang Renke, Yuan Jingting, Shi Xingkuan et al.. Study on laser dressing of superabrasive grinding[J]. China Mechanical Engineering, 2000, 11(5): 493~496
[2] Genyu Chen, Lifang Mei, Bi Zhang et al.. Experiment and numerical simulation study on laser truing and dressing of bronze-bonded diamond wheel[J]. Optics and Lasers in Engineering, 2010, 48(3): 295~304
[3] 陈根余, 朱定军, 彭凯 等. 脉冲激光修锐青铜金刚石砂轮烧蚀机制研究[J]. 中国激光, 2007, 34(4): 245~249
Chen Genyu, Zhu Dingjun, Peng Kai et al.. Ablation mechanism of bronze-bonded diamond wheels dressing by pulsed laser[J]. Chinese J. Lasers, 2007, 34(4): 245~249
[4] 陈根余. 声光调Q NdYAG脉冲激光修整青铜金刚石砂轮机理及技术研究[D]. 长沙: 湖南大学, 2006. 15~34
Chen Genyu. The Research on Mechanism and Technology for Laser Truing and Dressing of Bronze-Bonded Diamond Grinding Wheels by Acoustic-Optic Q-Switched NdYAG Pulsed Laser[D]. Changsha: Hunan University, 2006. 15~34
[5] 陈根余, 于俊勇, 李力钧 等. 激光烧蚀金刚石磨粒及其变质层与微裂纹分析[J]. 中国机械工程, 2006, 17(增刊): 317~320
Chen Genyu, Yu Junyong, Li Lijun et al.. Ablation of diamond grain by laser and analysis of its affected layer and micro-crack[J]. China Mechanical Engineering, 2006, 17(supplement): 317~320
[6] 王适, 孙宝元, 王裕昌 等. 聚晶金刚石石墨化温度的研究[J]. 超硬材料工程, 2005, 17(5): 32~35
Wang Shi, Sun Baoyuan, Wang Yuchang et al.. Study on graphitization temperature of polycrystalline diamond[J]. Superhard Material Engineering, 2005, 17(5): 32~35
[7] 孙书达, 孙景. 用高温显微镜直接观测金刚石的氧化过程[J]. 超硬材料工程, 2006, 18(6): 23~25
Sun Shuda, Sun Jing. Observation of oxidation process of diamond with high temperature microscope[J]. Superhard Material Engineering, 2006, 18(6): 23~25
[8] 陈根余, 陈国桂, 黄孔 等. 激光修整青铜金刚石砂轮精度研究[J]. 中国激光, 2009, 36(5): 1278~1281
[9] 王艳, 胡德金, 邓琦林 等. 激光辅助机械修整金刚石砂轮的温度场分析[J]. 中国激光, 2005, 32(3): 431~435
[10] 吴小军, 左敦稳, 徐锋 等. CVD金刚石膜激光打孔温度场有限元仿真[J]. 硅酸盐通报, 2010, 29(1): 83~85
Wu Xiaojun, Zuo Dunwen, Xu Feng et al.. FEM analysis on the temperature field of CVD diamond film laser drilling[J]. Bulletin of the Chinese Ceramic Society, 2010, 29(1): 83~85
[11] 杨世铭, 陶文铨 编著. 传热学[M]. 北京: 高等教育出版社, 2006. 13~25
Yang Shiming, Tao Wenquan. Heat Transfer[M]. Beijing: High Education Press, 2006. 13~25
[12] 杨勇生, 王珉. 砂轮形貌特征的评定及其合理匹配[J]. 机械, 1999, 26(2): 14~16
Yang Yongsheng, Wang Min. Estimation and rational matching of grinding wheel topography[J]. Machinery, 1999, 26(2): 14~16
[13] 王秦生. 超硬材料制造[M]. 北京: 中国标准出版社, 2002. 57~78
Wang Qinsheng. Superhard Material Manufacture[M]. Beijing: China Metrology Publishing House, 2002. 57~78
陈根余, 陈冲, 卜纯, 贾天阳, 余春荣. 激光修整青铜金刚石砂轮石墨变质层的研究[J]. 中国激光, 2012, 39(3): 0303006. Chen Genyu, Chen Chong, Bu Chun, Jia Tianyang, Yu Chunrong. Research on Carbonized Layer for Truing and Dressing of Bronze-Bonded Diamond Grinding Wheels with Laser[J]. Chinese Journal of Lasers, 2012, 39(3): 0303006.