测试设备位姿失调对自准直仪法测量圆分度误差的影响
田留德, 赵建科, 王涛, 赵怀学, 段亚轩, 刘朝晖. 测试设备位姿失调对自准直仪法测量圆分度误差的影响[J]. 光学 精密工程, 2017, 25(9): 2267.
TIAN Liu-de, ZHAO Jian-ke, WANG Tao, ZHAO Huai-xue, DUAN Ya-xuan, LIU Zhao-hui. Influence of test equipment pose error on dividing error measurement based on autocollimator[J]. Optics and Precision Engineering, 2017, 25(9): 2267.
[1] 中华人民共和国国家质量监督检验检疫总局.JJG 283-2007正多面棱体检定规程[S]. 北京: 中国计量出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China. JJG 283-2007 verification regulation of angular polygon [S]. Beijing: China Metrology Press, 2008. (in Chinese)
[2] 国家质量监督检验检疫总局.JJG 202-2007自准直仪检定规程[S]. 北京: 中国计量出版社, 2007.
General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China. JJG 202-2007 verification regulation of autocollimators [S]. Beijing: China Metrology Press, 2007. (in Chinese)
[3] 中华人民共和国国家质量监督检验检疫总局.JJF 1115-2004光电轴角编码器校准规范[S]. 北京: 中国计量出版社, 2005.
General Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China. JJF 1115-2004 calibration specification for photoelectric shaft encoders [S]. Beijing: China Metrology Press, 2005. (in Chinese)
[4] WARNER M, KRABBENDAM V, SCHUMACHER G. Adaptive periodic error correction for Heidenhain tape encoders [J]. SPIE, 2008, 7012: 70123N.
[5] DHAR V K, TICKOO A K, KAUL S K, et al.. Artificial neural network-based error compensation procedure for low-cost encoders [J]. Measurement Science and Technology, 2010, 21(1): 015112.
[6] 冯英翘, 万秋华, 宋超, 等. 基于坐标旋转数字计算算法的小型光电编码器细分[J]. 光学学报, 2014, 34(2): 0205001.
[7] 齐荔荔, 万秋华. 图像式光电编码器的测角技术及其硬件实现[J]. 光学学报, 2013, 33(4): 0412001.
[8] LOPEZ J, ARTES M. A new methodology for vibration error compensation of optical encoders [J]. Sensors, 2012, 12(4): 4918-4933.
[9] 于海, 万秋华, 王树洁, 等. 小型绝对式光电轴角编码器动态误差分析[J]. 中国激光, 2013, 40(8): 0808004.
[10] 冯英翘, 万秋华, 孙莹, 等. 近似三角波莫尔条纹光电信号的细分误差修正[J]. 光学学报, 2013, 33(8): 0812001.
[11] 王显军. 光电轴角编码器细分信号误差及精度分析[J]. 光学 精密工程, 2012, 20(2): 379-386.
[12] KAUL S K, TICKOO A K, KOUL R, et al.. Improving the accuracy of low-cost resolver-based encoders using harmonic analysis [J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2008, 586(2): 345-355.
[13] WATANABE T, FUJIMOTO H, NAKAYAMA K, et al.. Automatic high-precision calibration system for angle encoder [J]. SPIE, 2001, 4401: 267-274.
[14] FILATOV Y V, AGAPOV M Y, BOURNACHEV M N. Laser goniometer systems for dynamic calibration of optical encoders [J]. SPIE, 2003, 5144: 381-390.
[15] 孙树红, 梁立辉, 万秋华. 基于DSP的光电编码器自动检测系统[J]. 红外与激光工程, 2013, 42(9): 2536-2539.
SUN SH H, LIANG L H, WAN Q H. Automatic detection system for photoelectrical encoder based on DSP [J]. Infrared and Laser Engineering, 2013, 42(9): 2536-2539. (in Chinese)
[16] 孙树红, 赵长海, 万秋华, 等. 小型光电编码器自动检测系统[J]. 中国光学, 2013, 6(4): 600-606.
[17] 张桂林, 姜涛, 李敏. 一种光电编码器转角精度检测方法的误差分析[J]. 中国激光, 2013, 40(8): 0808001.
[18] 郭敬滨, 曹红艳, 王克新, 等. 转台分度误差的检定及补偿模型的建立[J]. 天津大学学报: 自然科学与工程技术版, 2014, 47(6): 524-529.
GUO J B, CAO H Y, WANG K X, et al.. Check of indexing error for turntable and establishment of its compensation model [J]. Journal of Tianjin University: Science and Technology, 2014, 47(6): 524-529. (in Chinese)
[19] 卢荣胜, 李万红, 劳达宝, 等. 激光跟踪仪测角误差补偿[J]. 光学 精密工程, 2014, 22(9): 2299-2305.
[20] 赵建科, 张周峰. 轴角编码器测量中偏心带来的误差分析[J]. 光子学报, 2007, 36(S1): 249-252.
ZHAO J K, ZHANG ZH F. Error analysis for measurement of encoder with shaft eccentricity [J]. Acta Photonica Sinica, 2007, 36(S1): 249-252. (in Chinese)
[21] 田留德, 刘朝晖, 赵建科, 等. 利用坐标变换分析塔差对编码器测角精度测试的影响[J]. 光学学报, 2015, 35(5): 0512003.
田留德, 赵建科, 王涛, 赵怀学, 段亚轩, 刘朝晖. 测试设备位姿失调对自准直仪法测量圆分度误差的影响[J]. 光学 精密工程, 2017, 25(9): 2267. TIAN Liu-de, ZHAO Jian-ke, WANG Tao, ZHAO Huai-xue, DUAN Ya-xuan, LIU Zhao-hui. Influence of test equipment pose error on dividing error measurement based on autocollimator[J]. Optics and Precision Engineering, 2017, 25(9): 2267.