[1] Roy T, Choudhury D, Ghosh S, et al. Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty[J]. Ceramics International, 2015, 41(1): 681-690.

    Roy T, Choudhury D, Ghosh S, et al. Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty[J]. Ceramics International, 2015, 41(1): 681-690.

[2] Ohgushi H, Kotobuki N, Funaoka H, et al. Tissue engineered ceramic artificial joint: ex vivo osteogenic differentiation of patient mesenchymal cells on total ankle joints for treatment of osteoarthritis[J]. Biomaterials, 2005, 26(22): 4654-4661.

    Ohgushi H, Kotobuki N, Funaoka H, et al. Tissue engineered ceramic artificial joint: ex vivo osteogenic differentiation of patient mesenchymal cells on total ankle joints for treatment of osteoarthritis[J]. Biomaterials, 2005, 26(22): 4654-4661.

[3] 鲍雨梅, 高海明, 许景顺, 等. 激光熔覆生物陶瓷涂层物相分析[J]. 中国激光, 2014, 41(10): 1003005.

    鲍雨梅, 高海明, 许景顺, 等. 激光熔覆生物陶瓷涂层物相分析[J]. 中国激光, 2014, 41(10): 1003005.

    Bao Y M, Gao H M, Xu J S, et al. Phase analysis of bioceramic coatings by laser cladding[J]. Chinese Journal of Lasers, 2014, 41(10): 1003005.

    Bao Y M, Gao H M, Xu J S, et al. Phase analysis of bioceramic coatings by laser cladding[J]. Chinese Journal of Lasers, 2014, 41(10): 1003005.

[4] 鲍雨梅, 高海明, 柴国钟, 等. 激光熔覆与等离子喷涂制备FHA涂层及其性能研究[J]. 中国激光, 2015, 42(8): 0806003.

    鲍雨梅, 高海明, 柴国钟, 等. 激光熔覆与等离子喷涂制备FHA涂层及其性能研究[J]. 中国激光, 2015, 42(8): 0806003.

    Bao Y M, Gao H M, Chai G Z, et al. Preparation and characterization of fluorinated hydroxyapatite coating by laser cladding and plasma spraying[J]. Chinese Journal of Lasers, 2015, 42(8): 0806003.

    Bao Y M, Gao H M, Chai G Z, et al. Preparation and characterization of fluorinated hydroxyapatite coating by laser cladding and plasma spraying[J]. Chinese Journal of Lasers, 2015, 42(8): 0806003.

[5] 赵吉鑫, 乔玉林, 薛胤昌, 等. 基于激光裂解含Ti粉聚二甲基硅氧烷的SiTiOC复相陶瓷涂层制备[J]. 中国激光, 2017, 44(10): 1003002.

    赵吉鑫, 乔玉林, 薛胤昌, 等. 基于激光裂解含Ti粉聚二甲基硅氧烷的SiTiOC复相陶瓷涂层制备[J]. 中国激光, 2017, 44(10): 1003002.

    Zhao J X, Qiao Y L, Xue Y C, et al. Fabrication of SiTiOC multiphase ceramic coating based on laser pyrolyzing of polydimethylsiloxane with titanium powder[J]. Chinese Journal of Lasers, 2017, 44(10): 1003002.

    Zhao J X, Qiao Y L, Xue Y C, et al. Fabrication of SiTiOC multiphase ceramic coating based on laser pyrolyzing of polydimethylsiloxane with titanium powder[J]. Chinese Journal of Lasers, 2017, 44(10): 1003002.

[6] 王洪涛, 李艳, 朱华. 具有分形特征的织构表面的润滑减摩性能研究[J]. 表面技术, 2016, 45(9): 182-187.

    王洪涛, 李艳, 朱华. 具有分形特征的织构表面的润滑减摩性能研究[J]. 表面技术, 2016, 45(9): 182-187.

    Wang H T, Li Y, Zhu H. Lubrication and anti-friction properties of textured surfaces with fractal characteristics[J]. Surface Technology, 2016, 45(9): 182-187.

    Wang H T, Li Y, Zhu H. Lubrication and anti-friction properties of textured surfaces with fractal characteristics[J]. Surface Technology, 2016, 45(9): 182-187.

[7] Lu X B, Khonsari M M. An experimental investigation of dimple effect on the stribeck curve of journal bearings[J]. Tribology Letters, 2007, 27(2): 169-176.

    Lu X B, Khonsari M M. An experimental investigation of dimple effect on the stribeck curve of journal bearings[J]. Tribology Letters, 2007, 27(2): 169-176.

[8] Li J L, Xiong D S, Wu H Y, et al. Tribological properties of laser surface texturing and molybdenizing duplex-treated stainless steel at elevated temperatures[J]. Surface and Coatings Technology, 2013, 228(8): S219-S223.

    Li J L, Xiong D S, Wu H Y, et al. Tribological properties of laser surface texturing and molybdenizing duplex-treated stainless steel at elevated temperatures[J]. Surface and Coatings Technology, 2013, 228(8): S219-S223.

[9] Li J L, Xiong D S, Dai J H, et al. Effect of surface laser texture on friction properties of nickel-based composite[J]. Tribology International, 2010, 43(5/6): 1193-1199.

    Li J L, Xiong D S, Dai J H, et al. Effect of surface laser texture on friction properties of nickel-based composite[J]. Tribology International, 2010, 43(5/6): 1193-1199.

[10] Khalid M, Mujahid M, Khan A N, et al. Effect of arc current on microstructure, texturing and wear behavior of plasma sprayed CaZrO3 coatings[J]. Ceramics International, 2013, 39(3): 2293-2302.

    Khalid M, Mujahid M, Khan A N, et al. Effect of arc current on microstructure, texturing and wear behavior of plasma sprayed CaZrO3 coatings[J]. Ceramics International, 2013, 39(3): 2293-2302.

[11] Ding Q, Wang L P, Wang Y X, et al. Improved tribological behavior of DLC films under water lubrication by surface texturing[J]. Tribology Letters, 2011, 41(2): 439-449.

    Ding Q, Wang L P, Wang Y X, et al. Improved tribological behavior of DLC films under water lubrication by surface texturing[J]. Tribology Letters, 2011, 41(2): 439-449.

[12] Choudhury D, Vrbka M, Mamat A B, et al. The impact of surface and geometry on coefficient of friction of artificial hip joints[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 72: 192-199.

    Choudhury D, Vrbka M, Mamat A B, et al. The impact of surface and geometry on coefficient of friction of artificial hip joints[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 72: 192-199.

[13] Zhang H, Hua M, Dong G Z, et al. Optimization of texture shape based on genetic algorithm under unidirectional sliding[J]. Tribology International, 2017, 115: 222-232.

    Zhang H, Hua M, Dong G Z, et al. Optimization of texture shape based on genetic algorithm under unidirectional sliding[J]. Tribology International, 2017, 115: 222-232.

[14] Mattei L, di Puccio F, Piccigallo B, et al. . Lubrication and wear modelling of artificial hip joints: a review[J]. Tribology International, 2011, 44(5): 532-549.

    Mattei L, di Puccio F, Piccigallo B, et al. . Lubrication and wear modelling of artificial hip joints: a review[J]. Tribology International, 2011, 44(5): 532-549.

[15] Etsion I. Modeling of surface texturing in hydrodynamic lubrication[J]. Friction, 2013, 1(3): 195-209.

    Etsion I. Modeling of surface texturing in hydrodynamic lubrication[J]. Friction, 2013, 1(3): 195-209.

[16] Uddin M S, Ibatan T, Shankar S. Influence of surface texture shape, geometry and orientation on hydrodynamic lubrication performance of plane-to-plane slider surfaces[J]. Lubrication Science, 2017, 29(3): 153-181.

    Uddin M S, Ibatan T, Shankar S. Influence of surface texture shape, geometry and orientation on hydrodynamic lubrication performance of plane-to-plane slider surfaces[J]. Lubrication Science, 2017, 29(3): 153-181.

[17] Waseem A. Temizer , Kato J, et al. Micro-texture design and optimization in hydrodynamic lubrication via two-scale analysis [J]. Structural and Multidisciplinary Optimization, 2017, 56(2): 227-248.

    Waseem A. Temizer , Kato J, et al. Micro-texture design and optimization in hydrodynamic lubrication via two-scale analysis [J]. Structural and Multidisciplinary Optimization, 2017, 56(2): 227-248.

[18] Patir N, Cheng H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Journal of Lubrication Technology, 1978, 100(1): 12-17.

    Patir N, Cheng H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Journal of Lubrication Technology, 1978, 100(1): 12-17.

[19] Wu C W, Zheng L Q. An average reynolds equation for partial film lubrication with a contact factor[J]. Journal of Tribology, 1989, 111(1): 188-191.

    Wu C W, Zheng L Q. An average reynolds equation for partial film lubrication with a contact factor[J]. Journal of Tribology, 1989, 111(1): 188-191.

[20] Patir N, Cheng H S. Application of average flow model to lubrication between rough sliding surfaces[J]. Journal of Lubrication Technology, 1979, 101(2): 220-229.

    Patir N, Cheng H S. Application of average flow model to lubrication between rough sliding surfaces[J]. Journal of Lubrication Technology, 1979, 101(2): 220-229.

[21] 鲍雨梅, 许景顺, 高海明, 等. 牛血清环境下等离子喷涂ZrO2增强羟基磷灰石涂层的摩擦磨损性能[J]. 复合材料学报, 2015, 32(6): 1777-1783.

    鲍雨梅, 许景顺, 高海明, 等. 牛血清环境下等离子喷涂ZrO2增强羟基磷灰石涂层的摩擦磨损性能[J]. 复合材料学报, 2015, 32(6): 1777-1783.

    Bao Y M, Xu J S, Gao H M, et al. Friction and wear properties of plasma-sprayed ZrO2 reinforced hydroxyapatite coatings in bovine serum environment[J]. Acta Materiae Compositae Sinica, 2015, 32(6): 1777-1783.

    Bao Y M, Xu J S, Gao H M, et al. Friction and wear properties of plasma-sprayed ZrO2 reinforced hydroxyapatite coatings in bovine serum environment[J]. Acta Materiae Compositae Sinica, 2015, 32(6): 1777-1783.

[22] 马晨波, 朱华, 孙见君. 基于CFD分析的表面织构润滑计算适用方程研究[J]. 机械工程学报, 2011, 47(15): 95-100,106.

    马晨波, 朱华, 孙见君. 基于CFD分析的表面织构润滑计算适用方程研究[J]. 机械工程学报, 2011, 47(15): 95-100,106.

    Ma C B, Zhu H, Sun J J. Applicable equation study of lubrication calculation of surface texture based on CFD analysis[J]. Journal of Mechanical Engineering, 2011, 47(15): 95-100,106.

    Ma C B, Zhu H, Sun J J. Applicable equation study of lubrication calculation of surface texture based on CFD analysis[J]. Journal of Mechanical Engineering, 2011, 47(15): 95-100,106.

[23] 牛威杨, 于爱兵, 吴剑钊, 等. 激光工艺参数对玻璃陶瓷孔锥度和热影响区的影响[J]. 激光与光电子学进展, 2017, 54(3): 031601.

    牛威杨, 于爱兵, 吴剑钊, 等. 激光工艺参数对玻璃陶瓷孔锥度和热影响区的影响[J]. 激光与光电子学进展, 2017, 54(3): 031601.

    Niu W Y, Yu A B, Wu J Z, et al. Influence of laser process parameters on taper and heat affected zone of glass ceramic hole[J]. Laser & Optoelectronics Progress, 2017, 54(3): 031601.

    Niu W Y, Yu A B, Wu J Z, et al. Influence of laser process parameters on taper and heat affected zone of glass ceramic hole[J]. Laser & Optoelectronics Progress, 2017, 54(3): 031601.

[24] 马晨波, 朱华, 张文谦, 等. 往复条件下织构表面的摩擦学性能研究[J]. 摩擦学学报, 2011, 31(1): 50-55.

    马晨波, 朱华, 张文谦, 等. 往复条件下织构表面的摩擦学性能研究[J]. 摩擦学学报, 2011, 31(1): 50-55.

    Ma C B, Zhu H, Zhang W Q, et al. Tribological property of textured surface under reciprocating motion[J]. Tribology, 2011, 31(1): 50-55.

    Ma C B, Zhu H, Zhang W Q, et al. Tribological property of textured surface under reciprocating motion[J]. Tribology, 2011, 31(1): 50-55.