[1] Gujba A K, Medraj M. Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening[J]. Materials, 2014, 7(12): 7925-7974.

[2] 何卫峰, 张金, 杨卓君, 等. 激光冲击强化钛合金熔覆修复试件疲劳性能研究[J]. 中国激光, 2015, 42(11): 1103008.

    He Weifeng, Yang Zhuojun, et al. Fatigue properties research of titanium alloy repaired by laser cladding and laser shock processing[J]. Chinese J Lasers, 2015, 42(11): 1103008.

[3] 张青来, 王荣, 张冰昕, 等. 激光冲击强化对AZ31镁合金力学性能和组织结构的影响[J]. 中国激光, 2015, 42(3): 0303001.

    Zhang Qinglai, Wang Rong, Zhang Bingxin, et al. Effect of laser shock processing on mechanical properties and microstructures of AZ31 magnesium alloy[J]. Chinese J Lasers, 2015, 42(3): 0303001.

[4] Lim H, Kim P, Jeong H, et al. Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening[J]. Journal of Materials Processing Technology, 2012, 212(6): 1347-1354.

[5] Luo K Y, Lu J Z, Wang Q W, et al. Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters[J]. Applied Surface Science, 2013, 285: 607-615.

[6] Wang C, Wang X G, Xu Y J, et al. Numerical modeling of the confined laser shock peening of the OFHC copper[J]. International Journal of Mechanical Sciences, 2016, 108: 104-114.

[7] Hu Y X, Yao Z Q. Numerical simulation and experimentation of overlapping laser shock processing with symmetry cell[J]. International Journal of Machine Tools and Manufacture, 2008, 48(2): 152-162.

[8] Hfaiedh N, Peyre P, Song H B, et al. Finite element analysis of laser shock peening of 2050-T8 aluminum alloy[J]. International Journal of Fatigue, 2015, 70: 480-489.

[9] 吕百达. 激光光学:光束描述、传输变换与光腔技术物理[M]. 北京: 高等教育出版社, 2003: 223- 241.

    LüBaida. Laser optics: Beam characterization, propagation and transformation, resonator technology and physics[M]. Beijing: Higher Education Press, 2003: 223- 241.

[10] 余天宇, 戴峰泽, 张永康, 等. 平顶光束激光冲击2024铝合金诱导残余应力场的模拟与实验[J]. 中国激光, 2012, 39(10): 1003001.

    Yu Tianyu, Dai Fengze, Zhang Yongkang, et al. Simulation and experimental study on residual stress field of 2024 aluminum alloy induced by flat-top laser beam[J]. Chinese J Lasers, 2012, 39(10): 1003001.

[11] Cao Y F, Shin Y C, Wu B X. Parametric study on single shot and overlapping laser shock peening on various metals via modeling and experiments[J]. Journal of Manufacturing Science and Engineering, 2010, 132(6): 061010.

[12] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68(2): 775-784.

[13] Berthe L, Fabbro R, Peyre P, et al. Shock waves from a water-confined laser-generated plasma[J]. Journal of Applied Physics, 1997, 82(6): 2826-2832.

[14] Correa C, de Lara L R, Díaz M, et al. . Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening[J]. International Journal of Fatigue, 2015, 79: 1-9.

[15] Peyre P, Chaieb I, Braham C. FEM calculation of residual stresses induced by laser shock processing in stainless steels[J]. Modelling and Simulation in Materials Science and Engineering, 2007, 15(3): 205-221.

[16] Perrone M R, Piegari A, Scaglione S. On the super-Gaussian unstable resonators for high-gain short-pulse laser media[J]. IEEE Journal of Quantum Electronics, 1993, 29(5): 1423-1487.

[17] 张兴权, 张永康, 顾永玉, 等. 激光冲击强化2024-T3铝合金的数值模拟与试验[J]. 农业机械学报, 2007, 38(12): 181-184.

    Zhang Xingquan, Zhang Yongkang, Gu Yongyu, et al. Numerical simulation and experimental investigation on laser shock processing[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(12): 181-184.