空间曲率检测中的标定误差分析和标定方法
吴家麒, 杨东英, 钱晋武. 空间曲率检测中的标定误差分析和标定方法[J]. 光学 精密工程, 2003, 11(2): 166.
吴家麒, 杨东英, 钱晋武. 空间曲率检测中的标定误差分析和标定方法[J]. Optics and Precision Engineering, 2003, 11(2): 166.
[1] 孙家广.计算机图形学[M].北京:清华大学出版社,1998.SUN J G. Computer grapics[M].Beijing: Tsinghua University Press,1998.(in Chinese)
[2] . 应用NURBS实 址苫镀娜毓筟J].光学精密工程,2001,9(3),223-225.QI D F, YANG J S, LIU G G, et al.3D Reconstruction of aircraft blades with NURBS[J]. Optics and Precision Engineering, 2002, 9(3): 223-225.
[3] 杨东英,吴家麒,沈林勇,等.基于曲率数据的曲线拟合方法研究[J].应用科学学报,2003,3.YANG D Y, WU J Q, SHEN L Y, et al.Research of Curve fitting Based on Curvature Data[J]. Journal of applied science, 2003.3.(in Chinese)
[4] 向明,黄敬之. 微分几何[M].北京:人民教育出版社,1981.XIANG M, HUANG J ZH. Differential Geometry[M]. Beijing:People's Education Press, 1981.(in Chinese)
[5] 刘光达.电桥应变传感器信号线性的修正方法[J].光学精密工程,1998,6(2):95-99.LIU G D. Bridge elastic signal linearization by way of A/D convertor[J].Optics and Precision Engineering, 1998,6(2):95-99.
[6] 邓建中.计算方法[M].西安:西安交通大学出版社,2001.DENG J ZH. Computational method[M]. Xi'an: Xi'an Jiaotong University Press, 2001.(in Chinese)
吴家麒, 杨东英, 钱晋武. 空间曲率检测中的标定误差分析和标定方法[J]. 光学 精密工程, 2003, 11(2): 166. 吴家麒, 杨东英, 钱晋武. [J]. Optics and Precision Engineering, 2003, 11(2): 166.