基于特征点的秦俑断裂面匹配方法 下载: 960次
Fracture Surface Matching Method for Terracotta Based on Feature Points
1 咸阳师范学院教育科学学院, 陕西 咸阳 712000
2 西北大学信息科学与技术学院, 陕西 西安 710127
图 & 表
图 1. 秦俑碎块。(a)第1组;(b)第2组;(c)第3组;(d)第4组
Fig. 1. Terracotta blocks. (a) Group 1; (b) group 2; (c) group 3; (d) group 4
下载图片 查看原文
图 2. 粗匹配结果。(a)第1组;(b)第2组;(c)第3组;(d)第4组
Fig. 2. Coarse matching results. (a) Group 1; (b) group 2; (c) group 3; (d) group 4
下载图片 查看原文
图 3. 细匹配结果。(a)第1组;(b)第2组;(c)第3组;(d)第4组
Fig. 3. Fine matching results. (a) Group 1; (b) group 2; (c) group 3; (d) group 4
下载图片 查看原文
表 1碎块匹配方法的运行参数
Table1. Operating parameters of blocks matching methods
Block | Point number of fracture surface | Matching method | RMS /mm | Time comsuming /s |
---|
Group 1 | 3501, 3714 | Method in Ref. [16] | 0.0297 | 6.5 | Method in Ref. [17] | 0.0238 | 5.9 | Method in Ref. [18] | 0.0235 | 5.2 | Proposed method | 0.0206 | 4.6 | Group 2 | 3712, 3849 | Method in Ref. [16] | 0.0295 | 6.4 | Method in Ref. [17] | 0.0237 | 5.7 | Method in Ref. [18] | 0.0233 | 5.1 | Proposed method | 0.0234 | 4.5 | Group 3 | 3177, 3014 | Method in Ref. [16] | 0.0310 | 6.8 | Method in Ref. [17] | 0.0241 | 6.1 | Method in Ref. [18] | 0.0239 | 5.9 | Proposed method | 0.0212 | 5.7 | Group 4 | 2543, 2711 | Method in Ref. [16] | 0.0304 | 6.5 | Method in Ref. [17] | 0.0245 | 5.8 | Method in Ref. [18] | 0.0241 | 5.1 | Proposed method | 0.0219 | 4.6 |
|
查看原文
赵夫群, 耿国华. 基于特征点的秦俑断裂面匹配方法[J]. 激光与光电子学进展, 2018, 55(4): 041005. Fuqun Zhao, Guohua Geng. Fracture Surface Matching Method for Terracotta Based on Feature Points[J]. Laser & Optoelectronics Progress, 2018, 55(4): 041005.