激光热成形工艺中加热位置对板材变形的影响

石永军; 刘峰; 綦耀光; 姚振强

中国激光, 2008, 35 (7): 1087, 网络出版: 2008-07-04

激光热成形工艺中加热位置对板材变形的影响

Effect of Heating Position on Deformation of Plate in Laser Forming

论文大纲

石永军 ^1,*刘峰 ¹綦耀光 ¹姚振强 ²

作者单位

¹ 中国石油大学机电工程学院, 山东东营 257061

² 上海交通大学机械与动力工程学院, 上海 200030

激光技术激光热成形加热位置变形规律 laser technique laser forming heating position deformation rule

摘要

在复杂型面激光热成形工艺规划中, 激光需要在板材的不同位置进行加热, 加工出所需要的目标形状, 而加热位置不同板材的变形不同。为了实现板材不同加热位置加工工艺参数的选择, 分别探讨了温度梯度机制和屈曲机制条件下加热位置对板材变形的影响规律。研究结果表明, 在温度梯度机制条件下, 当加热位置远离自由端时, 加热位置对弯曲角的影响不大, 当加热位置距自由端较近时, 加热位置对弯曲角有较大影响; 在屈曲机制条件下, 加热位置不仅影响板材的弯曲角, 而且影响板材的弯曲方向。因此, 在复杂曲面工艺规划中为了更准确地确定加工工艺参数, 建立工艺参数与板材弯曲变形基本关系数据库,必须考虑激光加热位置对变形的影响。

Abstract

To obtain the desirable shape for the complicated curve surface forming, it is necessary to place the laser scanning lines on different positions of metal plate. However, the deformation of plate is different when the heating position varies. In this paper, effect of the heating position on deformation behavior of the plate is discussed under the temperature gradient mechanism and the buckling mechanism in order to optimize the process parameters in industrial applications. The results suggest that under the temperature gradient mechanism the heating position has a little effect on the bending angle of the plate when the laser scanning line is far away from the fixing edge, while the effect of the heating position on the bending angle is great when the laser scanning line is close to the fixing edge. Under the buckling mechanism, the heating position has an effect not only on the bending angle of the plate, but also on the bending direction of the plate. Therefore, to acquire more precise parameters for the complicated curve surface process planning, the effect of the heating position on the deformation must be considered when building the basic relationship database between process parameters and plate deformation.

参考文献

[1] . Lawrence Yao. Analysis and prediction of edge effects in laser bending[J]. Journal of Manufacturing Science and Engineering, 2001, 123: 53-61.

[2] . Lawrence, M. J. J. Schmidt, L. Li. The forming of mild steel plates with a 2.5 kW high power diode laser[J]. International Journal of Machine Tools and Manufacture, 2001, 41: 967-977.

[3] . Vollertsen, I. Komel, R. Kals. The laser bending of steel foils for microparts by the buckling mechanism—a model[J]. Modeling and Simulation in Materials Science and Engineering, 1995, 3: 107-119.

[4] . Zhang, E. W. Reutzel, P. Michaleris. Finite element modeling discretization requriments for the laser forming process[J]. International Journal of Mechanical Sciences, 2004, 46: 623-637.

[5] Li Weimin, Manfred Geiger, Frank Vollertsen. Study on laser bending of metal sheets [J]. Chinese J. Lasers, 1998, A25(9):859～864
李纬民, Manfred Geiger, Frank Vollertsen. 金属板材激光弯曲成形规律的研究[J]. 中国激光, 1998, A25(9):859～864

[6] Ji Zhong, Wu Shichun. FEM simulation on laser bending of sheet metal [J]. Chinese J. Lasers, 2001, A28(10):953～956
季忠, 吴诗惇. 板料激光弯曲成形数值模拟[J]. 中国激光, 2001, A28(10):953～956

[7] Guan Yanjin, Sun Sheng. Study on buckling mechanism of laser bending of the sheet metal [J]. Laser Technology, 2001, 25(1):11～14
管延锦, 孙胜. 板料激光弯曲的屈曲机理的研究[J]. 激光技术, 2001, 25(1):11～14

[8] . . Curved laser bending of titanium alloy sheets and effects of heat radiation on its microstructure and property[J]. Acta Metallurgica Sinica, 2001, 37(6): 643-646.

[9] Wang Yang, Lu Hua, Tan Jianguo. A study on laser bending of sheet metal [J]. Laser Technology, 2003, 27(3):175～177
王扬, 路华, 谭建国. 板材激光加热弯曲成形的研究[J]. 激光技术, 2003, 27(3):175～177

[10] Guan Yanjin, Sun Sheng, Zhao Guoqun et al.. Simulation of the laser bending process of sheet metals with pre-stresses [J]. Chinese J. Lasers, 2002, A29(8):755～758
管延锦, 孙胜, 赵国群等. 预约束应力作用下的激光弯曲成形仿真工艺研究[J]. 中国激光, 2002, A29(8):755～758

[11] Zhou Jianzhong, Huang Shu, Du Jianjun et al.. Laser pre-stressed compound peen forming of plate [J]. Chinese J. Lasers, 2007, 34(6):861～865
周建忠, 黄舒, 杜建钧等. 金属板料激光预应力复合的喷丸成形[J]. 中国激光, 2007, 34(6):861～865

[12] Zhang Yongkang, Gao Li, Yang Chaojun. Theoretical analysis and experiment on deformation of TA2 sheet under laser shock [J]. Chinese J. Lasers, 2006, 33(9):1282～1287
张永康, 高立, 杨超君. 激光冲击TA2板料变形的理论分析和实验研究[J]. 中国激光, 2006, 33(9):1282～1287

[13] M. Geiger, F. Vollertsen, The mechanisms of laser forming [J]. CIRP Annals, 1993, (42):301～304

[14] Yongjun Shi, Zhenqiang Yao, Hong Shen et al.. Research on the mechanisms of laser forming for the metal plate [J]. International Journal of Machine Tools and Manufacture, 2006, 46(12-13):1689～1697

石永军, 刘峰, 綦耀光, 姚振强. 激光热成形工艺中加热位置对板材变形的影响[J]. 中国激光, 2008, 35(7): 1087. Shi Yongjun, Liu Feng, Qi Yaoguang, Yao Zhenqiang. Effect of Heating Position on Deformation of Plate in Laser Forming[J]. Chinese Journal of Lasers, 2008, 35(7): 1087.

激光热成形工艺中加热位置对板材变形的影响

关于本站 Cookie 的使用提示

全站搜索

激光热成形工艺中加热位置对板材变形的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索