[1] Kruth J P, Vandenbroucke B, Vaerenbergh J, et al.. Benchmarking of different SLS/SLM processes as rapid manufacturing techniques [C]. Proceedings of the International Conference on Polymers & Moulds Innovations, 2005: 1-7.

[2] Kruth J P, Mercelis P, Van Vaerenbergh J, et al.. Binding mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2005, 11(1): 26-36.

[3] 杨永强, 王迪, 吴伟辉. 金属零件选区激光熔化直接成型技术研究进展[J]. 中国激光, 2011, 38(6): 0601007.

    Yang Yongqiang, Wang Di, Wu Weihui. Research progress of direct manufacturing of metal parts by selective laser melting[J]. Chinese J Lasers, 2011, 38(6): 0601007.

[4] Mercelis P, Kruth J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2006, 12 (5): 254-265.

[5] 张凯, 刘婷婷, 张长东, 等. 基于熔池数据分析的激光选区熔化成形件翘曲变形行为研究[J]. 中国激光, 2015, 42(9): 0903007.

    Zhang Kai, Liu Tingting, Zhang Changdong, et al.. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese J Lasers, 2015, 42(9): 0903007.

[6] Kolossov S, Boillat E, Glardon R, et al.. 3D FE simulation for temperature evolution in the selective laser sintering process[J]. International Journal of Machine Tools & Manufacture, 2004, 44(2): 117-123.

[7] Krol T A, Seidel C, Schilp J, et al.. Verification of structural simulation results of metal-based additive manufacturing by means of neutron diffraction[J]. Physics Procedia, 2013, 41: 849-857.

[8] Krauss H, Zaeh M F. Investigations on manufacturability and process reliability of selective laser melting[J]. Physics Procedia, 2013, 41: 815-822.

[9] 王池林, 杨永强, 吴伟辉. Ti-Ni合金选区激光熔化快速成型基础实验研究[J]. 中国激光, 2007, 34(s1): 190-195.

    Wang Chilin, Yang Yongqiang, Wu Weihui. Experimental study on rapid prototyping of Ti-Ni alloy by selective laser melting[J]. Chinese J Lasers, 2007, 34(s1): 190-195.

[10] Bechmann F, Henzler J. Production and quality control of aeronautical parts manufactured by LaserCUSING [C]. Eucomas Conference, 2009.

[11] Hussein A, Hao L, Yan C, et al.. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting[J]. Materials and Design, 2013, 52: 638-647.

[12] 姚化山, 史玉升, 章文献, 等. 金属粉末选区激光熔化成形过程温度场模拟[J]. 应用激光, 2007, 27(6): 456-460.

    Yao Huashan, Shi Yusheng, Zhang Wenxian, et al.. Numerical simulation of the temperature field in selective laser melting[J]. Applied Laser, 2007, 27(6): 456-460.

[13] Simonelli M. Microstructure evolution and mechanical properties of selective laser melted Ti-6Al-4V[D]. Loughborough: Loughborough University, 2014: 152-153.

[14] Zaeh M F, Branner G. Investigations on residual stresses and deformations in selective laser melting[J]. Production Engineering, 2010, 4(1): 35-45.