[1] Li Xiangqiang, Liu Qingxiang, Wu Xiaojiang, et al. A GW level high-power radial line helical array antenna[J]. IEEE Trans Antennas Propag, 2008, 56(9): 2943-2948.

[2] 张健穹, 刘庆想, 胡舰, 等. 92单元三角栅格径向线子阵馈电系统的设计和实验研究[J]. 强激光与粒子束, 2015, 27: 043003. (Zhang Jianqiong, Liu Qingxiang, Hu Jian, et al. Design and experiment research on 92-element triangle-grid subarray radial-line feed network. High Power Laser and Particle Beams, 2015, 27: 043003)

[3] 周磊, 刘庆想, 李相强, 等. 用于阵列天线连续跟踪的步进电机控制器IP核设计[J]. 强激光与粒子束, 2011, 23(11): 3099-3102. (Zhou Lei, Liu Qingxiang, Li Xiangqiang, et al. Design of stepping motor control IP core for array antenna successive scanning. High Power Laser and Particle Beams, 2011, 23(11): 3099-3102)

[4] 王邦继, 刘庆想, 周磊, 等. FPGA在多轴步进电机控制器中的应用[J]. 电机与控制学报. 2012, 16(3): 78-82. (Wang Bangji, Liu Qing-xiang, Zhou Lei, et al. FPGA-based multiple-axis stepper motor controller. Electric Machines and Control, 2012, 16(3): 78-82)

[5] 王邦继, 刘庆想, 周磊, 等. 面向相控阵天线内部通信的CAN控制器IP核设计[J]. 强激光与粒子束, 2017, 29: 093002. (Wang Bangji, Liu Qingxiang, Zhou Lei, et al. Design of CAN controller IP core for intercom of phased array antenna. High Power Laser and Particle Beams, 2017, 29: 093002)

[6] 王邦继, 刘庆想, 张政权, 等. 机械相控阵列天线的电机控制系统设计[J]. 强激光与粒子束, 2011, 23(11): 3123-3126. (Wang Bangji, Liu Qingxiang, Zhang Zhengquan, et al. Design of motor control system for mechanical phased array antenna. High Power Laser and Particle Beams, 2011, 23(11): 3123-3126)

[7] 王邦继, 刘庆想, 李相强, 等. CAN总线应用层协议的研究与实现[J]. 计算机工程与应用, 2011, 47(20): 14-16. (Wang Bangji, Liu Qingxiang, Li Xiangqiang, et al. Design of CAN bus application layer protocol for bean control system. Computer Engineering and Applications, 2011, 47(20): 14-16)

[8] Monmasson E, Idkhajine L, Cirstea M N, et al. FPGAs in industrial control applications[J]. IEEE Trans Ind Inform, 2011, 7(2): 224-243.

[9] Guo Cuijian, Miao Changyun, Wu Zhigang, et al. Research and implementing of remote update for network telephone system program based on Ethernet[C]//Proceedings of the 2nd International Conference on Signal Processing Systems (ICSPS). 2010: 280-283.

[10] Qi Shengbo, Zhang Meng, Wang Zhenhao. Remote multi-processor updating system based on in-system programming and CAN-bus[J]. Appl Mech Mater, 2013, 364: 419-423.

[11] 张伏. 基于NiosII多片FPGA远程更新设计与实现[J]. 数字技术与应用, 2014(1): 163-164. (Zhang Fu. Design and implementation of multi-chip FPGA remote updating based on NiosII. Digital Technology & Application. 2014(1): 163-164)