六棱锥衬底旋转角影响LED效率的模拟探究
[1] Humphreys C J.Solidstate lighting[J]. MRS Bulletin, 2008, 33: 459470.
[2] Akasaki I,Amano H, Kito M, et al. Photoluminescence of Mgdoped ptype GaN and electroluminescence of GaN pn junction LED[J]. J. Luminescence, 1991, 48/49(2): 666-670.
[3] 周仕忠,林志霆, 王海燕, 等. 图形蓝宝石衬底GaN基LED的研究进展[J]. 半导体技术, 2012, 37(6): 417424.
[4] 李国强,杨慧. Si衬底氮化物LED器件的研究进展[J]. 半导体光电, 2012, 33(2): 153160.
[5] Huh C,Lee K S, Kang E J, et al. Improved lightoutput and electrical performance of InGaNbased lightemitting diode by microroughening of the pGaN surface[J]. J. Appl. Phys., 2003, 93(11):9383-9385.
[6] Wu L W,Chang S J, Su Y K, et al. In0.23Ga0.77N/GaN MQW LEDs with a low temperature GaN cap layer[J]. SolidState Electronics, 2003, 47(11): 2027-2030.
[7] Nakada N,Nakaji M, Ishikawa H, et al. Improved characteristics of InGaN multiplequantumwell lightemitting diode by GaN/AlGaN distributed Bragg reflector grown on sapphire[J]. Appl. Phys. Lett., 2000, 76(14):1804-1806.
[8] 李天保,梁建, 许并社. 光子晶体提高GaN基LED出光效率的研究进展[J]. 半导体光电, 2010, 31(3): 339-343.
[9] 张贤鹏,韩彦军, 罗毅, 等. ICP刻蚀pGaN表面微结构GaN基蓝光LED[J]. 半导体光电, 2008, 29(1):6-9.
[10] Lee J H,Oh J T, Kim Y C, et al. Stress reduction and enhanced extraction efficiency of GaNbased LED grown on coneshapepatterned sapphire[J]. IEEE Photonics Technol. Lett., 2008, 20(18):1563-1565.
[11] Lee J H,Lee D Y, Oh B W, et al. Comparison of InGaNbased LEDs grown on conventional sapphire and coneshapepatterned sapphire substrate[J]. IEEE Trans. on Electron Devices, 2010, 57(1): 157-163.
[12] Torma P T,Ali M, Svensk O, et al. InGaNbased 405nm nearultraviolet light emitting diodes on pillar patterned sapphire substrates[J]. Cryst. Eng. Comm., 2010, 12(10): 3152-3156.
[13] Lin Z T,Yang H, Zhou S Z, et al. Pattern design of and epitaxial growth on patterned sapphire substrates for highly efficient GaNbased LEDs[J]. Cryst. Growth and Design, 2012, 12(6): 2836-2841.
[14] Cho J,Kim H, Kim H K, et al. Simulation and fabrication of highly efficient InGaNbased LEDs with corrugated interface substrate[J]. Phys. Status Solidi (c), 2005, 2 (7): 2874-2877.
[15] Lee J H,Oh J T, Park J S, et al. Improvement of luminous intensity of InGaN light emitting diodes grown on hemispherical patterned sapphire[J]. Phys. Status Solidi (c), 2006, 3 (6): 2169-2173.
[16] Jeong S M,Kissinger S, Kim D W, et al. Characteristic enhancement of the blue LED chip by the growth and fabrication on patterned sapphire ( 0001 ) substrate[J]. J. Cryst. Growth, 2010, 312(2):258-262.
[17] Cheng J H,Wu Y S, Liao W C, et al. Improved crystal quality and performance of GaNbased light emitting diodes by decreasing the slanted angle of patterned sapphire[J]. Appl. Phys. Lett., 2010, 96 (5): 051109-051111.
[18] Yamada M,Mitani T, Narukawa Y. InGaNbased nearultraviolet and bluelightemitting diodes with high external quantum efficiency using a patterned sapphire substrate and a mesh electrode[J]. Jap. J. Appl. Phys., 2002, 41(12B): 1431-1433.
[19] Suihkonen S,Ali M, Svensk O, et al. Patterning of sapphire/GaN substrates[J]. Phys. Status Solidi(c), 2011, 8(5):1509-1512.
[20] Kissinger S,Jeong S M, Yun S H, et al. Enhancement in emission angle of the blue LED chip fabricated on lens patterned sapphire (0001)[J]. Solid State Electron., 2010, 54 (5): 509-515.
[21] Byeon K J,Hang S Y, Lee A H. Fabrication of two dimensional photonic crystal patterns on GaNbased light emitting diodes using thermally curable monomerbased nanoimprint lithography[J]. Appl. Phys. Lett., 2007, 91(9): 091106-091109.
[22] Lin N M,Chang S J, Shei S C, et al. GaNbased LEDs with air voids prepared by onestep MOCVD growth[J]. J. Lightwave Technol., 2011, 29(18): 2831-2835.
[23] Park E H,Jang J, Gupta S, et al. Airvoids embedded high efficiency InGaNlight emitting diode[J]. Appl. Phys. Lett., 2008, 93(19): 191103-191105.
何攀贵, 王海燕, 乔田, 周仕忠, 林志霆, 李国强. 六棱锥衬底旋转角影响LED效率的模拟探究[J]. 半导体光电, 2013, 34(3): 374. HE Pangui, WANG Haiyan, QIAO Tian, ZHOU Shizhong, LIN Zhiting, LI Guoqiang. Simulation of GaNbased LEDs on Hexagonal Pyramidshaped Patterned Sapphire Substrate with Different Rotation Angles[J]. Semiconductor Optoelectronics, 2013, 34(3): 374.