[1] 陈继民, 左铁钏. 激光切割中入射角对切割质量的影响［J］. 中国激光, 2001, 28(11): 1037-1041.

    Chen Jimin, Zuo Tiechun. Effect of laser beam incident angle on laser cutting quality［J］. Chinese J Lasers, 2001, 28(11): 1037-1041.

[2] Mullick S, Agrawal A K, Nath A K. Effect of laser incidence angle on cut quality of 4 mm thick stainless steel sheet using fiber laser［J］. Optics & Laser Technology, 2016, 81(1): 168-179.

[3] Chen J M, Yang J H, Zhang S. Parameter optimization of non-vertical laser cutting［J］. The International Journal of Advanced Manufacturing Technology, 2007, 33(5): 469-473.

[4] 王昆林. 激光材料加工的数学模型［J］. 激光杂志, 1996, 17(3): 105-109.

    Wang Kunlin. Mathematical models of laser material processing［J］. Laser Journal, 1996, 17(3): 105-109.

[5] 孟庆轩. 薄板激光切割气熔比数学建模及试验验证［J］. 机械工程学报, 2011, 47(17): 172-179.

    Meng Qingxuan. Vaporization-melt ratio mathematical model and experiments of laser cutting sheet metal［J］. Journal of Mechanical Engineering, 2011, 47(17): 172-179.

[6] 陈宇翔, 高 亮. 正交法分析激光切割高温合金钢工艺参数［J］. 激光与光电子学进展, 2016, 53(11): 111403.

    Chen Yuxiang, Gao Liang. Analysis of processing parameters for laser cutting high-temperature alloy steel by orthogonal method［J］. Laser & Optoelectronics Progress, 2016, 53(11): 111403.

[7] 张 威, 李国柱, 王春明, 等. 铝锂合金光纤激光切割的工艺优化与设计［J］. 中国激光, 2015, 42(2): 0203003.

    Zhang Wei, Li Guozhu, Wang Chunming, et al. Process optimization and design of fiber laser cutting aluminium-lithium alloy［J］. Chinese J Lasers, 2015, 42(2): 0203003.

[8] 谢小柱, 魏 昕, 胡 伟. CO2激光切割非金属材料理论模型［J］. 工具技术, 2008, 42(5): 19-20.

    Xie Xiaozhu, Wei Xin, Hu Wei. Theoretical model of CO2 laser cutting non-metal material［J］. Tool Engineering, 2008, 42(5): 19-20.

[9] 陈 华, 薛守龙, 胡 泓. 包装材料激光切割数学建模与实验研究［J］. 激光与光电子学进展, 2014, 52(1): 011404.

    Chen Hua, Xue Shoulong, Hu Hong. Experimental and theoretical analysis of cutting packaging materials by laser［J］. Laser & Optoelectronics Progress, 2014, 52(1): 011404.

[10] 姜新波, 李晋哲, 白 岩, 等. 激光切割木材试验及其加工质量的影响因素分析［J］. 激光与光电子学进展, 2016, 53(3): 031403.

    Jiang Xinbo, Li Jinzhe, Bai Yan, et al. Laser cutting wood test and influencing factors of processing quality［J］. Laser & Optoelectronics Progress, 2016, 53(3): 031403.

[11] Holland B J, Hay J N. The thermal degradation of PET and analogous polyesters measured by thermal analysis-Fourier transform infrared spectroscopy［J］. Polymer, 2002, 43(6): 1835-1847.

[12] 杜汉斌, 刘建华, 胡席远, 等. 激光切割热传导损失数值计算方法［J］. 机械工程学报, 2001, 37(5): 72-77.

    Du Hanbing, Liu Jianhua, Hu Xiyuan, et al. Methods of numerical calculation of the heat conduction loss in laser cutting［J］. Journal of Mechanical Engineering, 2001, 37(5): 72-77.

[13] 王 迪. 选区激光熔化成型不锈钢零件特性与工艺研究［D］. 广州: 华南理工大学, 2011.

    Wang Di. Study on the fabrication properties and process of stainless steel parts by selective laser melting［D］. Guangzhou: South China University of Technology, 2011.

[14] 魏立志. 高斯光束的特性研究［D］. 长春: 吉林大学, 2004.

    Wei Lizhi. The properties of the Gauss beam laser［D］. Changchun: Jilin University, 2004.

[15] Alda J. Laser and Gaussian beam propagation and transformation［M］. New York: Marcel Dekker Inc, 2003: 999-1013.