[1] Zhang W W, Yao Y L. Micro-scale lasershock processing—modeling, testing, and microstructure characterization[J]. Journal of Manufacturing Process, 2002, 3(2): 128-143.

[2] Montross C S, Wei T, Ye L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International Journal of Fatigue, 2002, 24(10): 1021-1036.

[3] 聂祥樊, 何卫锋, 李启鹏, 等. 激光喷丸改善TC6钛合金组织和力学性能[J]. 强激光与粒子束, 2013, 25(5): 1115-1119.(Nie Xiangfan, He Weifeng, Li Qipeng, et al. Improvement of structure and mechanical properties of TC6 titanium alloy with laser shock peening. High Power Laser and Particle Beams, 2013, 25(5): 1115-1119)

[4] 周建忠, 樊玉杰, 黄舒, 等. 激光微喷丸强化技术的研究与展望[J]. 中国激光, 2011, 38: 0601003.(Zhou Jianzhong, Fan Yujie, Huang Shu, et al. Research and prospect on micro-scale laser shot peening. Chinese Journal of Lasers, 2011, 38: 0601003)

[5] Mang Y, Kysar J W, Vukelic S, et al. Spatially resolved characterization of geometrically necessary dislocation dependent deformation in micro-scale laser shock peening[J]. Journal of Manufacturing Science and Engineering, 2009, 131: 041014.

[6] Chen H Q, Yao Y L, Kysar J W. Spatially resolved characterization of residual stress induced by micro-scale laser shock peening[J]. Journal of Manufacturing Science and Engineering, 2004, 126: 226-236.

[7] Sano Y, Obata M, Kubo T, et al. Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating[J]. Materials Science and Engineering A, 2006, 417: 334-340.

[8] Maawad E, Sano Y, Wagner L, et al. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys[J]. Materials Science and Engineering A, 2012, 536: 82-91.

[9] 车志刚, 熊良才, 史铁林, 等. 微尺度下激光冲击金属材料的特性分析与展望[J]. 激光技术, 2008, 32(4): 350-352.(Che Zhigang, Xiong Liangcai, Shi Tielin, et al. Character analysis and development of metal material for microscale laser shock processing. Laser Technology, 2008, 32(4): 350-352)

[10] 王敏. 微尺度激光喷丸强化材料的响应与力学性能研究[D]. 镇江: 江苏大学, 2010.(Wang Min. Response and mechanical properties of material treated by microscale laser shock peening. Zhenjiang: Jiangsu University, 2010)

[11] 周建忠, 卫登辉, 黄舒, 等. 微尺度激光喷丸强化TiN涂层的表面性能[J]. 光学 精密工程, 2009, 19(11): 2679-2684.(Zhou Jianzhong, Wei Denghui, Huang Shu, et al. Microscale laser shock peening on TiN coatings. Optics and Precision Engineering, 2009, 19(11): 2679-2684)

[12] 樊玉杰, 周建忠, 黄舒, 等. 激光微喷丸强化纯铜表面的纳米压痕分析[J]. 中国激光, 2008, 35: 0603026.(Fan Yujie, Zhou Jianzhong, Huang Shu, et al. Research on mechanical response of copper treated by micro laser shock peening using nanoindentation technique. Chinese Journal of Lasers, 2008, 35: 0603026)

[13] 焦阳, 何卫锋, 罗思海, 等. 无保护层激光冲击提高K24合金高周疲劳性能研究[J]. 中国激光, 2015, 42: 1003002.(Jiao Yang, He Weifeng, Luo Sihai, et al. Study of micro-scale laser shock processing without coating improving the high cycle fatigue performance of K24 simulated blades. Chinese Journal of Lasers, 2015, 42: 1003002)

[14] Nie Xiangfan, He Weifeng, Zhou Liucheng, et al. Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance[J]. Materials Science & Engineering A, 2014, 594: 161-167.

[15] Altenberger I, Nalla R K, Sano Y, et al. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 ℃[J]. International Journal of Fatigue, 2012, 44: 292-302.

[16] 《中国航空材料手册》总编委会. 中国航空材料手册[M]. 北京: 中国标准出版社, 2002.(Chinese Aeronautical Material Handbook Committee. Chinese aeronautical material handbook. Beijing: Chinese Standard Press, 2002)

[17] Fabbro R, Foumier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Applied Physics, 1990, 68(2): 775-784.

[18] Meyers M A. Dynamic behavior of materials[M]. New York: John Wiley & Sons Inc, 1994.