[1] 吴世凯, 肖荣诗, 陈恺. 大厚度不锈钢板的激光焊接[J]. 中国激光, 2009, 36(9): 2422-2425.

    Wu Shikai, Xiao Rongshi, Chen Kai. Laser welding of heavy section stainless steel plants[J]. Chinese J Lasers, 2009, 36(9): 2422-2425.

[2] 王柏平, 赵勇, 黄坚. 厚板不锈钢激光填丝多道焊的接头组织分析[J]. 中国激光, 2013, 40(2): 0203008.

    Wang Baiping, Zhao Yong, Huang Jian. Investigation on microstructure of thick plate stainless steel joint welded by multi-pass laser welding with filler wire[J]. Chinese J Lasers, 2013, 40(2): 0203008.

[3] U Dilthey, S Bohm, G Trager, et al.. Laser-beam and electron-beam welding of material combinations consisting of cast iron and case-hardening or heat-treatable steels[J]. Welding and Cutting, 1998, 50(7): 214-216.

[4] T Jokinen, M Karhu, V Kujanp. Welding of thick austenitic stainless steel using NdYAG laser with filler wire and hybrid process[C]. Laser Institute of America, 2002. 1-10.

[5] A Salminen. The filler wire-laser beam interaction during laser welding with low alloyed steel filler wire[J]. Mechanika, 2010, 84(4): 67-74.

[6] Salminen Antti. The effects of filler wire feed on the efficiency of laser welding[C]. SPIE, 2003, 4831: 263-268.

[7] Janne Nurminen, Jouko Riihimki, Jonne Nkki. Comparison of laser cladding with powder and hot and cold wire techniques[C]. ICALEO, 2006. 634-637.

[8] Janne Nurminen, Jouko Riihimki, Jonne Nkki. Hot-wire cladding process studies[C]. ICALEO, 2007. 947-952.

[9] 肖荣诗, 左铁钏, Günter Ambrosy. 电流强化铝合金CO2激光焊接[J]. 中国激光, 2004, 31(3): 359-362.

    Xiao Rongshi, Zuo Tiechuan, Günter Ambrosy. Investigation on current enhanced CO2 laser welding of aluminum[J]. Chinese J Lasers, 2004, 31(3): 359-362.

[10] Ohnishi Terumasa, Kawahito Yousuke, Katayama Seiji. High-power and high-brightness laser butt welding with using hot wire for thick high-strength steel plate[J]. Quarterly Journal of the Japan Welding Society, 2011, 29(1): 41-47.

[11] 李俐群, 陶汪, 朱先亮. 厚板高强钢激光填丝多层焊工艺[J]. 中国激光, 2009, 36(5): 1251-1255.

    Li Liqun, Tao Wang, Zhu Xianliang. Wire filling multilayer welding of high strength steel thick plate[J]. Chinese J Lasers, 2009, 36(5): 1251-1255.

[12] 余阳春. 激光填丝焊焊丝熔入行为及工艺研究[D]. 武汉: 华中科技大学, 2010.

    Yu Yangchun. Study on the Technology and Filler Wire Melting Dynamics during the Laser Welding with Filler Wire[D]. Wuhan: Huazhong University of Science and Technology, 2010.

[13] Yamamoto Motomichi, Shinozaki Kenji, Kadoi Kota. Development of hot-wire laser welding method for lap joint of steel sheet with wide gap[J]. Quarterly Journal of the Japan Welding Society, 2011, 29(3): 58-61.

[14] Yamamoto Motomichi, Shinozaki Kenji, Kadoi Kota. Development of high-efficiency high-quality hot-wire laser fillet welding process[J]. Quarterly Journal of the Japan Welding Society, 2011, 29(3): 62-65.

[15] 温鹏, 郑世卿, 荻崎贤二. 填充热丝激光窄间隙焊接的实验研究[J]. 中国激光, 2011, 38(11): 1103004.

    Wen Peng, Zheng Shiqing, Shinozaki Kenji. Experimental research on laser narrow gap welding with filling hot wire[J]. Chinese J Lasers, 2011, 38(11): 1103004.