[1] 戴蓉, 谢铁邦. 新型一维位移工作台的设计及特性分析［J］. 光学 精密工程，2006,14(3):428-433.

    DAI R, XIE T B. Design and analysis of 1-DOF nano-positioning stage ［J］. Opt. Precision Eng., 2006,14(3):428-433. (in Chinese)

[2] 卢礼华, 郭永丰, 下河边明. 高增益 PID 控制器实现纳米定位 ［J］. 光学 精密工程，2007,15(1):63-68.

    LU L H, GUO Y F, TACHIKAWA, et al.. High-gain PID controller for nanometer positioning ［J］. Opt. Precision Eng., 2007,15(1):63-68. (in Chinese)

[3] 向红标, 裘祖荣, 李醒飞, 等. 精密实验平台的非线性摩擦建模与补偿 ［J］. 光学 精密工程，2010,18 (5):1119-1127.

    XIANG H B, QIU Z R, LI X F, et al.. Nonlinear friction modeling and compensation of high-precision experimental platforms ［J］. Opt. Precision Eng., 2010,18(5):1119-1127. (in Chinese)

[4] Huang Shyh Chour. Analysis of a model to forecast thermal deformation of ball screw feed drive systems ［J］. Int. J. Math. Tools Manufact., 1995,35(8):6.

[5] KIM S K,CHO D W. Real-time estimation of temperature distribution in a ball-screw system［J］. Int. J. Math. Tools Manufaet,1997,37(4):14.

[6] HOREJS O. Thermo-mechanical model of ball screw with non-steady heat sources. ［C］. 2007:133-137.

[7] AHN J, CHUNG S. Real-time estimation of the temperature distribution and expansion of a ball screw system using an observer ［C］. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2004,218(12):1667-1681.

[8] 夏军勇, 吴波, 胡友民, 等. 多变化热源下的滚珠丝杠热动态特性 ［J］. 中国机械工程，2008,19(8):955-958.

    XIA J Y, WU B, HU Y M, et al.. The Thermal Dynamic Characteristic of Ball-screw under the variational multi-thermal Source ［J］. Chinese Mechanical Engineering,2008,19(18):955-958. (in Chinese)

[9] 严宗达, 王洪礼. 热应力 ［M］. 北京：高等教育出版杜,1993.

    YAN Z D, WANG H L. Thermal Stress ［M］.Beijing:Higher Education Press, 1993.(in Chinese)

[10] 俞昌铭. 热传导及其数值分析 ［M］. 北京：清华大学出版社, 1981.

    YU CH M. Thermal Conduction and its Numerical Analysis ［M］. Beijing:Tsinghua University Press, 1981.(in Chinese)

[11] 程光仁, 施祖康, 张超鹏. 滚珠螺旋传动设计基础 ［M］. 北京：机械工业出版社,1987.

    CHENG G R, SHI Z K, ZHANG CH P. The Design of Ball Helical Transmission ［M］. Beijing:China Machine Press, 1987.(in Chinese)