[1] 张泰华,杨业敏,赵亚溥,等.MEMS材料力学性能的测试技术[J].力学进展,2002,32(4):545-562.ZHANG T H,YANG Y M,ZHAO Y B,et al.Measurement of mechanical properties of MEMS materials[J].Journal of Mechanical Strength,2002,32(4):545-562.(in Chinese)

[2] 李智,王向军.微机电系统测试技术及方法[J].光学精密工程,2003,11(1):37-42.LI ZH,WANG X J.MEMS measurement technologies and methods[J].Optics and Precision Engineering,2003,11(1):37-42.(in Chinese)

[3] 宋康,赵玉龙,蒋庄德.激光干涉微轮廓测量仪[J].光学精密工程,2003,11(3):245-249.SONG K,ZHAO Y L,JIANG ZH D.Laser profilometer[J].Optics and Precision Engineering,2003,11(3):245-249.(in Chinese)

[4] 王寿荣.硅微型惯性器件理论及应用[M].南京:东南大学出版社,2000.WANG SH R.Theory and applications of micromechanical silicon inertia components[M].Nanjing:Southeast University Press,2000.(in Chinese)

[5] 李德葆,陆秋海.工程振动试验分析[M].北京:清华大学出版社,2004.LI D B,LU Q H.Analysis of experiments in engineering vibration[M].Beijing:Tsinghua University Press,2004.(in Chinese)

[6] 熊斌.栅结构微机械振动式陀螺[D].中国科学院,2001.XIONG B.Fence structure micromachining vibration rate gyroscope[D],Chinese Academy of Science,2001.(in Chinese)

[7] LI L,UTTAMCHANDANI D.Design and evaluation of a MEMS optical chopper for fibre optical applications measurement technology[J].MEMS and Microsystems Engineering,2004,151(2):77-83.

[8] 李万玉,董介春.微机械陀螺的仿真与优化[J].传感器技术,2004,23(3):77-80.LI W Y,DONG J CH.Simulation and optimization of micromachined gyroscope[J].Journal of Transducer Technology,2004,23(3):77-80.(in Chinese)

[9] . Determination of Young's modulus and residual stress of electroless nickel using test structures fabrication in a new surface micromachining process[J]. Microsystem Technologies, 1996, 2: 92-96.

[10] WILLIAM T.Electrostatic comb drive for resonant sensor and actuator applications[D].University of California,1990:42-65.