[1] GRUJICICM, ZHAO CL, DEROSSET WS, et a1.Adiabatic shear instability based mechanism for particles/ substrate bonding in the cold-gas dynamic-spray process[J].Materials and Design, 2004, 25(8): 681-688.

[2] DYKHUIZEN RC, SMITH M F..Gas dynamic principles of cold spray [J]. Journal of Thermal Spray Technology, 1998, 7(2): 205-212.

[3] ALKIMOV AP, KOSAREV VF.Method of cold gas dynamic deposition [J].Dokl Akad Nauk SSSR., 1990(315): 1062-1065.

[4] PAPYRINA, KOSAREVV, KLINKOVK, et a1.Cold Spray Technology[M].Amsterdam: Elsevier Science, 2006.

[5] BRAYM, COCKBURNA, O'NEILLW.Recent developments of the Laser-assisted Cold Spray process and deposit characterization: 3rd pacific International Conference on Applications of Laser and Optics [c].United Kingdom, 2009.

[6] BRAYM, COCKBURNA, O'NEILLW.The Laser-assisted Cold Spray Process and Deposit Characterization[J].Surface and Coatings Technology, 2009, 203(19): 2851-2857.

[7] ISSHIKIY, FUJIKIS, ITOHS, et al.Cladding of chromium onto mild steel by low-pressure laser spraying [J].Thin Solid Films, 1996, 288(1-2): 45-49.

[8] ISSHIKIY, NAKAIH, HASHIMOTOM.Microstructure of the clad layer of chromium on to mild steel by low-pressure laser spraying [J].Surface and Coating Technology, 1998(101-102): 420-423.

[9] BRAYM, COCKBURNA, O'NEILLW.The Laser-assisted cold spraying process and deposit characterization[J].Surface and Coating Technology, 2009, 203(19): 2851-2857.

[10] KULMALAM, VUORISTOP.Influence of process condition in laser -assisted low -pressure cold spraying [J].Surface and Coating Technology, 2008, 202(18): 4503-4508.

[11] MORIMOTOJ, ONODAT, SASAKIY, et al.Improvement of solid cold sprayed TiO2 -Zn coating with direct diode laser [J].Vacuum, 2004, 73(3-4): 527-532.

[12] JODOINB, RALETZF, VARDELLEM.Cold spray modeling and validation using an optical diagnostic method[J].Surface驭Coatings Technology, 2006, 200(14-15): 4424 4432.

[13] DYKHUIZENRC, SMITH MF.Gas dynamic principles of cold spray [J].Journal of Thermal Spray Technology, 1998, 7(2): 205-212.

[14] GARTNERF, STOLTENHOFET, SCHMIDTT, et a1.The cold spray process and its potential for industrial applications[J].Journal of Thermal Spray Technology, 2006, 15(2): 223-232.

[15] VAN STEENKISTETH, SMITH JR, TEETS RE.Aluminum coatings via kinetic spray with relatively large powder particles [J].Surface驭Coatings Technology, 2002, 154(2-3): 237-252.

[16] VAN STEENKISTETH, SMITH JR, TEETS RE.Aluminum coatings via kinetic spray with relatively large powder[J].Surf. Coat. Technol., 2002(154): 237-252.

[17] SCHMIDTT, GARTNERF, ASSADIH, et al.Development of a generalized parameter window for cold spray deposition[J].Acta Mater, 2005(54): 729-742.

[18] JODOINB.Cold spray nozzle Mach number limitation [J].Therm. Spray Technol., 2002(11): 496-507.

[19] GRUJICICM, ZHAOCL, TONGAC, et al.Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process [J].Mater. Sci. Eng., 2004, A(368): 222-230.

[20] JODOINB, RALETZF, VARDELLEM.Cold spray modeling and validation using an optical diagnostic method [J].Surf. Coat. Technol., 2005(200): 4424-4432.

[21] MORGANR, FOXP, PATTISONJ, et al.Analysis of cold gas dynamically sprayed aluminium deposits [J].Mater. Lett., 2004(58): 1317-1320.

[22] KLINKOV SV, KOSAREVVF, REINM.Cold spray deposition: significance of particle impact phenomena [J].Aerospace Science& Technology, 2005, 9(7): 582-591.

[23] LUPOIR, O'NEILLW.Powder stream characteristics in cold spray nozzles [J].Surface and Coatings Technology, 2011(206): 1069-1076.

[24] ASSADIH, GARTNERF, STOLTENHOFFT, et al.Bonding mechanism in cold gas spraying [J].Acta Mater, 2003(51): 4379–4394.

[25] LEGOUX JG, IRISSOUE, MOREAUC.Effect of substrate temperature on the formation mechanism of cold-sprayed Aluminum, Zinc and Tin coating [J].Thermal Spray Technology, 2007, 16(5-6): 619-626.

[26] FUKUMOTOM, WADAH, TANABEK, et al.Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process[J].Thermal Spray Technology, 2007, 16(5-6): 643-650.

[27] BRAYM, COCKBURNA, SPARKESM, et al.Supersonic laser deposition of Ti and Ti64 alloys: Proceedings of the 29th International Congress on Applications of Lasers and Electro-Optics, 2010 [C].Anaheim, California USA..

[28] LUPOIR, SPARKESM, COCKBURNA, et al.High speed titanium coatings by supersonic laser deposition [J].Materials Letters, 2011(65): 3205-3207.

[29] SOH, CHENCT, CHENYA.Wear behaviours of laser-clad stellite alloy6 [J].Wear, 1996(192): 78-84.

[30] LUPOIR, COCKBURNA, BRYANC, et al.Hardfacing Steel with Nanostructured Coatings of Stellite-6 by Supersonic Laser Deposition [J].30th International Congress on Applications of Lasers and Electro -Optics, ICALEO. 2011. 435-441

[31] ASSADIH, STOLTENHOFFT, KREYEH.Bonding mechanism in cold spraying [J].Acta Mater, 2003, 51(15): 4379-4394.

[32] LI WY, LIAOHL, LI CJ, et al.On high velocity impact of micro-sized metallic particles in cold spraying [J].Appl Surf Sci., 2006, 253(5): 2852-2862.

[33] LI WY, LIAO HL, LI CJ, et al.Numerical simulation of deposition behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying [J].Appl Surf Sci., 2007, 253(11): 5084-5091.

[34] GRUJICICM, SAYLOR JR, BEASLEYDE, et al.Computational analysis of the interfacial bonding between feed power particles and the substrate in the cold-gas dynamic-spray process [J].Appl Surf Sci., 2003, 219(3-4): 211-227.

[35] LI WY, LI CJ, WANGYY, et al.Effect of Parameters of cold sprayed Cu particles on its impacting behaviors [J].Acta Metall, 2005, 41(03): 282-286.