[1] P. Krehl, F. Schwirzke, A. W. Cooper. Correlation of stress-wave profiles and the dynamics of the plasma produced by laser irradiation of plane solid targets[J]. J. Appl. Phys., 1975, 46(10): 4400～4406

[2] D. L. Paisley. Confined plasma ablation for shock physics, plate launch, and material dynamics[C]. SPIE, 2006, 6261: 62611Y

[3] S. Cogan, E. Shirman, Y. Haas. Production efficiency of thin metal flyers formed by laser ablation[J]. J. Appl. Phys., 2005, 97(11): 113508

[4] R. Royal, C. Stein, C. Miglionico et al.. Laboratory simulation of hypervelocity debris[J]. International J. Impact Engineering, 1995, 17(4-6): 707～718

[5] D. C. Swift, D. L. Paisley, K. J. McClellan et al.. Equation of state of solid nickel aluminide[J]. Phys. Rev. B, 2007, 76(13): 134111～134125

[6] S. Katz, E. Grossmana, I. Gouzmana et al.. Response of composite materials to hypervelocity impact[J]. International J. Impact Engineering, 2008, 35(12): 1606～1611

[7] H. S. Niehoff, F. Vollertsen. Non-thermal laser stretch-forming[J]. Adv. Mater. Res., 2005, 6-8: 433～440

[8] H. Gao, C. Ye, G. J. Cheng. Deformation behaviors and critical parameters in microscale laser dynamic forming [J]. J. Manufacturing Science and Engineering, 2009, 131(5): 051011

[9] Y. Fan, Y. Wang, S. Vukelic et al.. Wave-solid interactions in laser-shock-induced deformation processes[J]. J. Appl. Phys., 2005, 98(10): 104904

[10] C. Gary, J. P. Daniel, M. Zhou. Microstructure and mechanical property characterizations of metal foil after microscale laser dynamic forming[J]. J. Appl. Phys., 2007, 101(6): 063108

[11] J. K. Di, M. Zhou, J. Li et al.. Micro-punching process based on spallation delamination induced by laser driven-flyer[J]. Appl. Surf. Sci., 2012, 258(7): 2339～2343

[12] 王霄, 杨昆, 刘会霞 等. 激光驱动飞片加载金属箔板成形及数值模拟[J]. 塑性工程学报, 2009, 16(1): 25～30

    Wang Xiao, Yang Kun, Liu Huixia et al.. Research and numerical simulation on metal foil forming under laser driven flyer[J]. J. Plasticity Engineering, 2009, 16(1): 25～30

[13] 范金荣, 黄舒, 周建忠 等. 激光微冲击成形技术分析与展望[J]. 激光与光电子学进展, 2012, 49(1): 010003

    Fan Jinrong, Huang Shu, Zhou Jianzhong et al.. Analysis and expectation of microscale laser shock forming[J]. Laser & Optoelectronics Progress, 2012, 49(1): 010003

[14] 刘会霞, 杨昆, 王匀 等. 激光驱动飞片加载金属箔板成形实验研究[J]. 中国激光, 2009, 36(5): 1292～1295

    Liu Huixia, Yang Kun, Wang Yun et al.. Research on micro-forming experiment of metal foil under laser driven flyer loading method[J]. Chinese J. Lasers, 2009, 36(5): 1292～1295

[15] 王霄, 杨昆, 刘会霞 等. 激光驱动飞片加载金属箔板成形的加载机制[J]. 中国激光, 2009, 36(6): 1569～1574

    Wang Xiao,Yang Kun, Liu Huixia et al.. Loading mechanism of metal foil forming under laser driven flyer[J]. Chinese J. Lasers, 2009, 36(6): 1569～1574

[16] H. X. Liu, Z. B. Shen, X. Wang et al.. Numerical simulation and experimentation of a novel laser indirect shock forming[J]. J. Appl. Phy., 2009, 106(6): 063107

[17] H. X. Liu, Z. B. Shen, X. Wang et al.. Feasibility investigations on a novel micro-embossing using laser-driven flyer[J]. Opt. Laser Technol., 2012, 44(6): 1987～1991

[18] H. X. Liu, H. J. Wang, Z. B. Shen et al.. The research on micro-punching by laser-driven flyer[J]. International J. Machine Tools & Manufacture, 2012, 54-55: 18～24

[19] A. V. Farnsworth, Jr.. Laser acceleration of thin flyers[C]. American Institute of Physics Conference Proceedings, 1996, 370: 1225～1228

[20] H. R. Brierley, D. M. Williamson, T. A. Vine. Improving laser-driven flyer efficiency with high absorptance layers[C]. American Institute of Physics Conference Proceedings, 2011, 1426: 315～318

[21] W. M. Trott. Investigation of the dynamic behavior of laser-driven flyers[C]. American Institute of Physics Conference Proceedings, 1994, 309: 1655～1658

[22] A. M. Frank, W. M. Trott. Investigation of thin laser-driven flyer plates using streak imaging and stop motion microphotography[C]. American Institute of Physics Conference Proceedings, 1996, 370: 1209～1212

[23] T. Kadono, M. Yoshida, E. Takahashi. Flyer acceleration by a high-power KrF laser with a long pulse duration[J]. J. Appl. Phys., 2000, 88(5): 2943～2947

[24] T. Kadono, M. Yoshida, N. K. Mitani. Flyer acceleration experiments using a KrF laser system with a long pulse duration and pressure and thickness of isobaric zone induced in impacted materials[J]. Laser and Particle Beams, 2001, 19(4): 623～630

[25] A. Benuzzi, M. Koenig, J. Krishnan et al.. Dynamics of laser produced shocks in foam-solid targets[J]. Physics of Plasmas, 1998, 5(8): 2827～2829

[26] K. A. Tanaka, M. Hara, N. Ozaki et al.. Multi-layered flyer accelerated by laser induced shock waves[J]. Physics of Plasmas, 2000, 7(2): 676～670

[27] 经福谦. 实验物态方程导引(第二版)[M]. 北京: 科学出版社, 1999. 59～61

    Jing Fuqian. Guidance of Experimental Equation of State (Second edition)[M]. Beijing: Science Press, 1999. 59～61

[28] Dimitri Batani, Antinio Balducci, Wigen Nazarov et al.. Use of low-density foams as pressure amplifiers in equation-of-state experiments with laser-driven shock waves[J]. Phys. Rev. E, 2001, 63(4): 046410

[29] 罗国强. W-Mo-Ti-Mg系波阻抗梯度飞片材料的准等熵压缩特性.[D]. 武汉: 武汉理工大学, 2004. 10～16

    Luo Guoqiang. Quasi-Isentropic Compressive Characteristics of W-Mo-Ti-Mg System Flyer-Plate with Graded Wave Impedance[D]. Wuhan: Wuhan University of Technology, 2004. 10～16