[1] Kumar S, Dang T D, Arnold F E, et al. Synthesis, structure, and properties of PBO/SWNT composites[J]. Macromolecules, 2002, 35(24): 9039-9043.

[2] Hua J S, Li Y X, Liu X Y, et al. Graphene/MWNT/poly(p-phenylenebenzobisoxazole) multiphase nanocomposite via solution prepolymerization with superior microwave absorption properties and thermal stability[J]. The Journal of Physical Chemistry C, 2017, 121(2): 1072-1081.

[3] Stock J W, Zaeh M F, Spaeth J P. Remote laser cutting of CFRP: influence of the edge quality on fatigue strength[J]. Proceedings of SPIE, 2014, 8963: 89630T.

[4] 张玲玲, 姜兆华, 张伟, 等. 超强度纤维柔性复合材料激光加工工艺研究[J]. 应用激光, 2012, 32(3): 238-243.

    Zhang L L, Jiang Z H, Zhang W, et al. A review of laser processing fiber-reinforced flexible composite material[J]. Applied Laser, 2012, 32(3): 238-243.

[5] Tagliaferri V, Di Ilio A, Visconti C. Laser cutting of fibre-reinforced polyesters[J]. Composites, 1985, 16(4): 317-325.

[6] Fenoughty K A, Jawaid A, Pashby I R. Machining of advanced engineering materials using traditional and laser techniques[J]. Journal of Materials Processing Technology, 1994, 42(4): 391-400.

[7] Yung K C, Mei S M, Yue T M. A study of the heat-affected zone in the UV YAG laser drilling of GFRP materials[J]. Journal of Materials Processing Technology, 2002, 122(2/3): 278-285.

[8] Freitag C, Wiedenmann M, Negel J P, et al. High-quality processing of CFRP with a 1.1-kW picosecond laser[J]. Applied Physics A, 2015, 119(4): 1237-1243.

[9] Salama A, Li L, Mativenga P, et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites[J]. Applied Physics A, 2016, 122(2): 1-11.

[10] Lau W S, Lee W B, Pang S Q. Pulsed Nd∶YAG laser cutting of carbon fibre composite materials[J]. CIRP Annals, 1990, 39(1): 179-182.

[11] Staehr R, Bluemel S, Hansen P, et al. The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP[J]. Plastics Rubber and Composites, 2015, 44(3): 111-116.

[12] Thomas H, Bernhard K, Frank S. Micromachining with picosecond laser pulses[J]. Industrial Laser Solutions, 2004, 199(10): 34.

[13] 陈根余, 朱智超, 殷赳, 等. 单晶金刚石飞秒激光加工的烧蚀阈值实验[J]. 中国激光, 2019, 46(4): 0402001.

    Chen G Y, Zhu Z C, Yin J, et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing[J]. Chinese Journal of Lasers, 2019, 46(4): 0402001.

[14] Takahashi K, Tsukamoto M, Masuno S, et al. Influence of laser scanning conditions on CFRP processing with a pulsed fiber laser[J]. Journal of Materials Processing Technology, 2015, 222: 110-121.

[15] Li Z L, Zheng H Y, Lim G C, et al. Study on UV laser machining quality of carbon fibre reinforced composites[J]. Composites Part A, 2010, 41(10): 1403-1408.

[16] Anisimov S I, Kapeliovich B L, Perelman T L, et al. Electron emission from metal surfaces exposed to ultrashort laser pulses[J]. Soviet Physics-JETP, 1974, 39(2): 375-378.

[17] 蒋翼. 碳纤维复合材料皮秒激光切割及其与铝合金连接研究[D]. 长沙: 湖南大学, 2017.

    JiangY. Research on cutting carbon-fiber reinforced plastic with picosecond pulsed laser and its connection with aluminum alloy[D]. Changsha: Hunan University, 2017.

[18] Romoli L, Fischer F, Kling R. A study on UV laser drilling of PEEK reinforced with carbon fibers[J]. Optics and Lasers in Engineering, 2012, 50(3): 449-457.

[19] 朱晓农, 包文霞. 超短脉冲激光及其相关应用的一些基本知识[J]. 中国激光, 2019, 46(12): 1200001.

    Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications[J]. Chinese Journal of Lasers, 2019, 46(12): 1200001.

[20] 贾宝申, 唐洪平, 苏春洲, 等. 脉冲激光去除树脂基复合材料表面涂层[J]. 中国激光, 2019, 46(12): 1202010.

    Jia B S, Tang H P, Su C Z, et al. Removal of surface coating of resin matrix composites by pulsed laser[J]. Chinese Journal of Lasers, 2019, 46(12): 1202010.

[21] Patel R S, Bovatsek J. Processing benefits of high repetition rate and high average power 355 nm laser for micromachining of microelectronics packaging materials[J]. Proceedings of SPIE, 2007, 6459: 64590H.

[22] Srinivasan R, Maynebanton V. Self-developing photoetching of poly(ethylene terephthalate) films by far-ultraviolet excimer laser radiation[J]. Applied Physics Letters, 1982, 41(6): 576-578.

[23] Goeke A, Emmelmann C. Influence of laser cutting parameters on CFRP part quality[J]. Physics Procedia, 2010, 5: 253-258.

[24] Al-Sulaiman F A, Yilbas B S, Ahsan M. CO2 laser cutting of a carbon/carbon multi-lamelled plain-weave structure[J]. Journal of Materials Processing Technology, 2006, 173(3): 345-351.

[25] Wahab M S, Rahim E A, Rahman N A, et al. Laser cutting characteristic on the laminated carbon fiber reinforced plastics (CFRP) composite of aerospace structure panel[J]. Advanced Materials Research, 2012, 576: 503-506.

[26] Kononenko T V, Freitag C, Komlenok M S, et al. Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses[J]. Journal of Applied Physics, 2014, 115(10): 103107.

[27] Niino H, Harada Y, Anzai K J, et al. 2D/3D laser cutting of carbon fiber reinforced plastic (CFRP) by fiber laser irradiation[J]. Proceedings of SPIE, 2015, 9353: 935303.

[28] Weber R, Freitag C, Kononenko T V, et al. Short-pulse laser processing of CFRP[J]. Physics Procedia, 2012, 39(9): 137-146.