[1] JUNG M, RIESBECK T, SCHMITZ J, et al. High energy laser demonstrats f defense applications[C]. SPIE, 2016, 10254: 1025416.

[2] WANG S, FANG F. High power laser and it's development[J]. Laser & Optoelectronics Progress, 2017, 54(9): 45-58.

[3] WANG C, CHOW Y, REEKIE L. A comparative study of the laser performance of diode-laser-pumped Nd:GdVO4 and Nd:YVO4 crystals[J]. Applied Physics B, 2000, 70(6): 769-772.

[4] ZOU Y, HU M, LI P. Temperature characteristics of frequency separation in Nd-doped dual-frequency microchip laser[J]. Acta Photonica Sinica, 2019, 48(6): 0614001.

[5] CHEN Y, CHEN B, . Calculation of three-dimensional thermal-gradient-induced stress birefringence in slab lasers[J]. Applied Physics B, 2005, 81(1): 75-82.

[6] CHENAIS S, DRUON F, FORGET S. On thermal effects in solid-state lasers:the case of ytterbium-doped materials[J]. Progress in Quantum Electronics, 2006, 30(4): 89-153.

[7] WU Y, LONG X, JIAO Z. Optimal design of high power Nd:YAG laser based on compensation of thermal lens effect[J]. Laser Technology, 2015, 39(3): 377-380.

[8] YANG H, FENG G, ZHOU S. Thermal effects in high-powerNd:YAG disk-type solid state laser[J]. Optics & Laser Technology, 2011, 43: 1006-1015.

[9] KOUZNETSOV D, BISSON J. Role of undoped cap in the scaling of thin-disk lasers[J]. Optical Society of America, 2008, 25(3): 338-345.

[10] VRETENAR N, CARSON T, PETERSON P, et al. Thermal stress acterization of various thindisk laser configurations at room temperature[C]. SPIE, 2011, 7912: 79120B.

[11] SARAVANI M, JAFARNIA A, AZIZI M. Effect of heat spreader thickness and material on temperature distribution and stresses in thin disk laser crystals[J]. Optics & Laser Technology, 2012, 44: 756-762.

[12] GUO J, JIA K, YANG F. Study of jet cooling in disk laser[J]. High Power Laser and Particle Beams, 2014, 26(1): 22-26.

[13] SHAO N, ZHU X, ZHU G. Study on jet array impingement cooling for crystal module of thin disk laser[J]. Laser Technology, 2016, 40(5): 695-700.

[14] YANG J, WANG X, YANG Q. Advances in jet impinging heattransfer[J]. Vacuum & Cryogenics, 2018, 24(4): 217-222.

[15] JIA K, JIANG Y, YANG F. 340 W average power output of diode-pumped composite ceramic YAG/Nd:YAG disk laser[J]. Laser Physics, 2016, 26: 115801.

[16] ZHANG X, LIU D, SANG Y. Effects of aging on the characteristics of Nd:YAG nano-powders[J]. Journal Alloys and Compounds, 2010, 502: 206-210.

[17] SALADINO M, NASILLO G, MARTINO D. Synthesis of Nd:YAG nano-powder using the citrate method with microwave irradiation[J]. Journal Alloys and Compounds, 2010, 491: 737-741.

[18] ZHANG W, LU T, WEI N. Assessment of light scattering by pores in Nd:YAG transparent ceramics[J]. Journal Alloys and Compounds, 2012, 520: 36-41.

[19] YANG S, TAO W. Heat transfer[M]. Beijing: Higher Education Press, 2006: 1315, 4345, 206211.

[20] WANG F. Analysis of compute fluid dynamics-CFD software theory andapplication[M]. Beijing:Qinghua University Press, 2004:12, 203.