基于FBG的鸭嘴式横担主材应变研究

徐树振; 田雷; 赵成均; 于亚红; 王涛; 李英娜; 赵振刚; 李川

光学技术, 2014, 40 (1): 58, 网络出版: 2014-05-23

基于FBG的鸭嘴式横担主材应变研究

Research of FBG-based duckbill-type cross arms by the strain

论文大纲

徐树振 ^*田雷赵成均于亚红王涛李英娜赵振刚李川

作者单位

昆明理工大学信息工程与自动化学院, 昆明 650500

光纤Bragg光栅塔架模型鸭嘴式横担应变荷载波长移位 fiber Bragg grating tower model duckbill-type beam strain load wavelength shift

摘要

横担是电力系统塔架结构中承力较多的构件, 在线路覆冰、舞动等因素影响下横担主材受力过大, 容易造成损坏。在研制的电力系统塔架模型鸭嘴式横担主材的上下表面, 采用环氧树脂做为粘贴剂分别安装四根光纤Bragg光栅, 实时监测横担应变。实验通过调整荷载改变横担主材所受应力, 从而使得光纤Bragg光栅中心波长发生移位。荷载实验表明, 在鸭嘴式横担端部进行加载和卸载时, 位于4个测点的光纤Bragg光栅的实验灵敏度分别为: 6 pm/kg, 2 pm/kg, 3 pm/kg, 2 pm/kg; 线性度分别为2.6%FS, 6.1%FS, 2.7%FS, 4.5%FS。

Abstract

Cross arm withstands more force in the tower of power system than other components, it’s easy to cause the damage of the cross arm by the excessive weight of line ice, wave, or other physical factors. A model of power transmission tower with a duckbill-type cross arm is developed, four fiber Bragg gratings are mounted on the upper surface and the lower surface of main beam of duckbill-type cross arm with epoxy resin. The strain of main beams are induced by the stress of loading, which causes the wavelength shift of fiber Bragg gratings. When loading and unloading on the ends of duckbill-type cross arm, the experiment indicates that load sensitivities of four measuring gratings are respectively 6 pm/kg, 2 pm/kg, 3 pm/kg, 2 pm/kg, the repeatability errors are 0.7%FS, 4.1%FS, 1.9%FS, 3.0%FS.

参考文献

[1] 陈祥和, 刘在国, 肖琦. 输电杆塔及基础设计［M］. 北京, 中国电力出版社, 2008: 45-75.

Chen X H, Liu Z G, Xiao Q. Transmission tower and foundation design［M］. Beijing: China Electric Power Press, 2008: 45-75.

[2] 何军, 赫中营. 输电铁塔结构受冰雪荷载作用的破坏原因［J］. 工程建设与设计, 2008 (9): 23-25.

He J , He Z Y. Failure reason analysis of transmission tower due to sleet load［J］. Architectural and Structural Design, 2008 (9): 23-25.

[3] Bennion I. UV-written in-fiber Bragg gratings［J］. Optical and Quantum Electronics, 1996, 28(2): 93-135.

[4] Lam D K W, Garside B K. Characterization of single-mode optical fiber filters［J］. Applied Optics, 1981, 20: 440-445.

[5] 王可, 周海渊, 吴旭贤. 基于光纤光栅技术的船体横扭角测量方法研究［J］. 光学技术, 2012, 38(6):678-682.

Wang K, Zhou H Y, Wu X X. Study on hull transverse twist measurement based on optical fiber technology［J］. Optical Technique, 2012, 38(6):678-682.

[6] 何小婷. 电力工程力学［M］. 北京, 中国电力出版社, 2007: 72-76, 211-213.

He X T. Power engineering mechanics［M］. Beijing, China Electric Power Press, 2007: 72-76, 211-213.

[7] 李川, 张以谟, 赵永贵, 等. 光纤光栅: 原理、技术与传感应用［M］. 北京:科学出版社, 2005: 1-17, 42-116.

Li C, Zhang Y M, Zhao Y G, et al. Fiber grating: principles, techniques, and sensing applications［M］. Beijing: Science Press, 2005:1-17,42-116.

[8] Li C, Wang Y, Wan Z. Fiber Bragg grating weighing sensor of beam with two parallel holes［J］. Sensors and Actuators A: Physical, 2009, 12(15): 12-15.

[9] 闫思安,刘江,庄君刚. 光纤Bragg光栅在绕组温度测量中的应用研究［J］. 光学技术, 2013, 39(3): 200-203.

Yan S A, Liu J, Zhuang J G. The research of fiber Bragg grating in the application of the winding temperature measurement［J］. Optical Technique, 2013, 39(3):200-203.

[10] Shu X W, Gwandu B A L, Liu Y, et al. Sampled fiber Bragg grating for simultaneous refractive-index and temperature measurement［J］. Optics Letters, 2001,11: 774-776.

徐树振, 田雷, 赵成均, 于亚红, 王涛, 李英娜, 赵振刚, 李川. 基于FBG的鸭嘴式横担主材应变研究[J]. 光学技术, 2014, 40(1): 58. XU Shuzhen, TIAN Lei, ZHAO Chengjun, YU Yahong, WANG Tao, LI Yingna, ZHAO Zhengang, LI Chuan. Research of FBG-based duckbill-type cross arms by the strain[J]. Optical Technique, 2014, 40(1): 58.

基于FBG的鸭嘴式横担主材应变研究

关于本站 Cookie 的使用提示

全站搜索

基于FBG的鸭嘴式横担主材应变研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索