[1] 卢秉恒, 李涤尘．增材制造(3D打印)技术发展［J］．机械制造与自动化, 2013(4): 1-4．

[2] 杨强, 鲁中良, 黄福享, 等．激光增材制造技术的研究现状及发展趋势［J］．航空制造技术, 2016(12): 26-31．

[3] 胡晓冬, 于成松, 姚建华．激光熔覆熔池温度监测与控制系统的研究现状［J］．激光与光电子学进展, 2013, 50(12): 27-33．

[4] 王明娣, 刘秀波, 郭开波, 等．激光熔覆成形件的应力分析与裂纹控制: 第14届全国特种加工学术会议［C］．苏州: 中国机械工程, 2011: 494-497．

[5] 张尧成．激光熔覆INCONEL 718合金涂层的成分偏聚与强化机理研究［D］．上海: 上海交通大学, 2013．

[6] HUA T, JING C, XIN L, et al．Research on molten pool temperature in the process of laser rapid forming［J］．Journal of Materials Processing Technology, 2008, 198(1): 454-462．

[7] 李延民, 刘振侠, 杨海欧, 等．激光多层涂敷过程中的温度场测量与数值模拟［J］ ．金属学报, 2003, 39(5): 521-525．

[8] SONG L, BAGAVATH-SINGH V, DUTTA B, et al．Control of melt pool temperature and deposition height during direct metal deposition process［J］．The International Journal of Advanced Manufacturing Technology, 2012, 58(1): 247-256．

[9] 沈治．激光熔覆加工中加工温度自适应控制研究［J］．机床与液压, 2011, 39(22): 118-120．

[10] SALEHI D, BRANDT M．Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process［J］. The International Journal of Advanced Manufacturing Technology, 2006, 29(3): 273-278．

[11] DEVESSE W, BAERE D D, HINDERDAEL M, et al．Hardware-in-the-loop control of additive manufacturing processes using temperature feedback［J］．Journal of Laser Applications, 2016, 28(2): 022302．

[12] JOSE R, PATRICIO C．Model predictive control of power converters and electrical drives［M］．Wiley-IEEE Press, 2012．

[13] CAMACHO D E F, BORDONS D C．Model predictive control［M］．New York: Springer, 2004．

[14] QIN S J, BADGWELL T A．A survey of industrial model predictive control technology［J］．Control Engineering Practice, 2003, 11(7): 733-764．