激光增材制造熔池温度实时监测与控制
[1] 卢秉恒, 李涤尘.增材制造(3D打印)技术发展[J].机械制造与自动化, 2013(4): 1-4.
[2] 杨强, 鲁中良, 黄福享, 等.激光增材制造技术的研究现状及发展趋势[J].航空制造技术, 2016(12): 26-31.
[3] 胡晓冬, 于成松, 姚建华.激光熔覆熔池温度监测与控制系统的研究现状[J].激光与光电子学进展, 2013, 50(12): 27-33.
[4] 王明娣, 刘秀波, 郭开波, 等.激光熔覆成形件的应力分析与裂纹控制: 第14届全国特种加工学术会议[C].苏州: 中国机械工程, 2011: 494-497.
[5] 张尧成.激光熔覆INCONEL 718合金涂层的成分偏聚与强化机理研究[D].上海: 上海交通大学, 2013.
[6] HUA T, JING C, XIN L, et al.Research on molten pool temperature in the process of laser rapid forming[J].Journal of Materials Processing Technology, 2008, 198(1): 454-462.
[7] 李延民, 刘振侠, 杨海欧, 等.激光多层涂敷过程中的温度场测量与数值模拟[J] .金属学报, 2003, 39(5): 521-525.
[8] SONG L, BAGAVATH-SINGH V, DUTTA B, et al.Control of melt pool temperature and deposition height during direct metal deposition process[J].The International Journal of Advanced Manufacturing Technology, 2012, 58(1): 247-256.
[9] 沈治.激光熔覆加工中加工温度自适应控制研究[J].机床与液压, 2011, 39(22): 118-120.
[10] SALEHI D, BRANDT M.Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process[J]. The International Journal of Advanced Manufacturing Technology, 2006, 29(3): 273-278.
[11] DEVESSE W, BAERE D D, HINDERDAEL M, et al.Hardware-in-the-loop control of additive manufacturing processes using temperature feedback[J].Journal of Laser Applications, 2016, 28(2): 022302.
[12] JOSE R, PATRICIO C.Model predictive control of power converters and electrical drives[M].Wiley-IEEE Press, 2012.
[13] CAMACHO D E F, BORDONS D C.Model predictive control[M].New York: Springer, 2004.
[14] QIN S J, BADGWELL T A.A survey of industrial model predictive control technology[J].Control Engineering Practice, 2003, 11(7): 733-764.
张荣华, 宋立军. 激光增材制造熔池温度实时监测与控制[J]. 应用激光, 2018, 38(1): 13. Zhang Ronghua, Song lijun. Real-time Monitoring and Control of Melt Pool Temperature during Laser Additive Manufacturing[J]. APPLIED LASER, 2018, 38(1): 13.