分区扫描对激光沉积制造钛合金温度场的影响
[1] БOPHCOBA E A.Металлография титановых сплавов[M].Beijing: National Defence Industry Press, 1986: 292-304.鲍里索娃.钛合金金相学[M].陈石卿译.北京: 国防工业出版社, 1986: 292-304.
[2] ZHANG XIAOHONG, LIN XIN, CHEN JIN, et al.Effects of heat treatment on the microstructures and mechanical properties of TAl5 titanium alloys by laser solid forming[J].Rare Metal Materials and Engineering, 2011, 40(1): 142-147.张小红, 林鑫, 陈静, 等.热处理对激光立体成形TA15合金组织及力学性能的影响[J].稀有金属材料与工程, 2011, 40(1): 142-147.
[3] HE R J, WANG H M.Fatigue crack nucleation and growth behaviors of laser melting deposited Ti-6Al-2Zr-Mo-V[J]. Material Science and Engineering, 2010(A527): 1933-1937.
[4] QIN LANYUN, WANG TING, YANG GUANG, et al.Experimental study on laser deposition repair BT20 alloy component[J]. Infrared and Laser Engineering, 2014, 43(2): 1-6.钦兰云, 王婷, 杨光, 等.激光沉积修复BT20合金的试验研究[J].红外与激光工程, 2014, 43(2): 1-6.
[5] XUE LEI, CHEN JING, ZHANG FENGYING, et al. Laser Rapid repair of the air craft components of titanium alloy[J].Rare Metal Materials and Engineering, 2006, 35(11): 1817-1821.薛蕾, 陈静, 张凤英, 等.飞机用钛合金零件的激光快速修复[J].稀有金属材料与工程, 2006, 35(11): 1817-1821.
[6] GUO PENGFEI.Research on ultrasonic vibration technology based on laser deposition repair process [D].Shenyang: Shenyang aerospace university. 2014.郭鹏飞.面向激光沉积修复的超声振动技术研究[D].沈阳: 沈阳航空航天大学, 2014.
[7] LU BINGHENG, LI DICHEN.Development of the additive manufacturing (3D printing) technology [J].Mechanical Building and Automation, 2013, 42(4): 1-4.卢秉恒, 李涤尘.增材制造(3D打印)技术发展[J].机械制造与自动化, 2013, 42(4): 1-4.
[9] TOYSERHANI E, KHAJEPOUR A, CORBIN S.Laser cladding[M].London: CRC Press, 2005.
[10] SUAREZ A, AMADO J M, TOBAR M C, et al.Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation[J].Surface and Coatings Technology, 2010(204): 1983-1988.
[11] JIANG JIBIN, LIAN GUOFU, XU MINGSAN.Research on status and trend of laser cladding[J].Journal of Chongqing University of Technology(Natural Science), 2015(1): 27-36.江吉彬, 练国富, 许明三.激光熔覆技术研究现状及趋势[J].重庆理工大学学报(自然科学版), 2015(1): 27-36.
[12] FRANK BRUCKNER, STEFFEN NOWOTNY, CHRISTOPH LEYENS, et al.Innovation in laser cladding and direct metal deposition: SPIE 2012: Laser and Tera-Hertz Science and Technology, Wuhan[C].[出版地不详]: [出版者不详], 2012: 823904.
[13] LABUDOVIC M, HU D, KOVACEVIC R.A three dimension model for direct laser metal powder deposition and rapid prototyping [J].Journal of Materials Science, 2003, 38(1): 35-49.
[14] LUO F, YAO J H, HU X, et al.Effect of laser power on the cladding temperature field and the heat affected zone[J].Journal of Iron and Steel Rearch International, 2011, 18(1): 73-78.
[15] E T MASOUD ALIMARDANI, JAN P HUISSOON.A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process[J].Optics and Lasers in Engineering, 2007, 45(12): 1115-1130.
[16] EHSAN F, RADOVAN K.Effect of path planning on the laser powder deposition process: .hermal and structural evaluation[J].Journal of Advanced Manufacturing Technology International, 2010(51): 659-669.
[18] WANG FUYU, LIU WEIJUN, ZHAO YUHUI, et al.Thermo-mechanical coupling field simulation of complex thin-wall part laser rapid prototype process[J].Journal of Mechanical Engineering, 2013, 49(5): 192-198.王福雨, 刘伟军, 赵宇辉, 等.复杂薄壁零件激光快速成形过程热力耦合场的数值模拟[J].机械工程学报, 2013, 49(5): 192-198.
[19] ZHAO HONGYUN, SHU FENGYUN, ZHANG HONGTAO, et al.Numerical simulation of temperature field of laser cladding based on birth-death element method[J].Transactions of the China Welding Institution, 2010, 31(5): 81-84.赵洪运, 舒凤远, 张洪涛, 等.基于生死单元的激光熔覆温度场数值模拟[J].焊接学报, 2010, 31(5): 81-84.
[20] ZHANG GUOZHI, HU RENXI, CHEN JIGUANG, et al.Thermodynamics Finite Element Analysis of ANSYS10.0[M].Beijing: China Machine Press, 2007.张国志, 胡仁喜, 陈继光, 等.ANSYS10.0 热力学有限元分析[M].北京: 机械工业出版社, 2007.
[21] HU GUOLIANG, REN JIWEN.Introductory and Improvement of Finite Element Analysis [M].Beijing: National Defence of Industry Press, 2009.胡国良, 任继文.有限元分析与入门提高[M].北京: 国防工业出版社, 2009.
[22] YANG GUANG, DING LINLIN, QIN LANYUN, et al.Measurement and numerical simulation of temperature field of laser deposition of TA15 titanium alloy[J].High Power Laser and Particle Beams, 2014, 26(11): 1190021-1190027.杨光, 丁林林, 钦兰云, 等.TA15钛合金激光沉积温度场数值模拟与检测[J].强激光与粒子束, 2014, 26(11): 1190021-1190027.
[23] SHI YONGJUN.Research on laser bending mechanism and forming process plan for 3D curved plates [D].Shanghai: Shanghai Jiaotong University, 2007.石永军.激光热变形机理及复杂曲面板材热成形工艺规划研究[D].上海: 上海交通大学, 2007.
杨光, 周佳平, 钦兰云, 王维, 卞宏友, 丁林林. 分区扫描对激光沉积制造钛合金温度场的影响[J]. 应用激光, 2015, 35(4): 428. Yang Guang, Zhou Jiaping, Qin Lanyun, Wang Wei, Bian Hongyou, Ding Linlin. In fluence of Separate Area Scanning on the Temperature Field of Laser Deposition Manufacturing of Titanium Alloy[J]. APPLIED LASER, 2015, 35(4): 428.