[1] Zhang Yongkang, Zhang Lei, Luo Kaiyu et al.. Effects of laser shock processing on mechanical properties of laser welded ANSI 304 stainless steel joint［J］. Chinese Journal of Mechanical Engineering, 2012, 25(2): 285～292

[2] K. Y. Luo, J. Z. Lu, Y. K. Zhang et al.. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel［J］. Materials Science and Engineering A, 2011, 528(13-14): 4783～4788

[3] 罗新民, 赵广志, 张永康 等. Ti-6Al-4V激光冲击强化及其微结构响应分析［J］. 金属学报, 2012, 48(9): 1116～1122

    Luo Xinmin, Zhao Guangzhi, Zhang Yongkang et al.. Laser shock processing of Ti-6Al-4V and analysis of its microstructure response［J］. Acta Metall. Sin., 2012, 48(9): 1116～1122

[4] 张凌峰, 熊毅, 张毅 等. 高锰钢在激光冲击作用下的微观特征［J］. 中国激光, 2011, 38(6): 0603025

    Zhang Lingfeng, Xiong Yi, Zhang Yi et al.. Microstructure of high manganese steel by laser shock processing［J］. Chinese J. Lasers, 2011, 38(6): 0603025

[5] 周建忠, 樊玉杰, 黄舒 等. 激光微喷丸强化技术的研究与展望［J］. 中国激光, 2011, 38(6): 0601003

    Zhou Jianzhong, Fan Yujie, Huang Shu et al.. Research and prospect on micro-scale laser shot peening［J］. Chinese J. Lasers, 2011, 38(6): 0601003

[6] 刘会霞, 杨昆, 王匀 等. 激光驱动飞片加载金属箔板成形实验研究［J］. 中国激光, 2009, 36(6): 1292～1295

    Liu Huixia, Yang Kun, Wang Yun et al.. Research on micro-forming experiment of metal foil under laser driven flyer loading method［J］. Chinese J. Lasers, 2009, 36(6): 1292～1295

[7] J. Z. Lu, K. Y. Luo, Y. K. Zhang et al.. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel［J］. Acta Materialia, 2010, 58(16): 5354～5362

[8] C. Sudha, P. Parameswaran, R. Krishnan et al.. Effect of laser shock processing on the microstructure of 304(L) austenitic stainless steel［J］. Materials and Manufacturing Processes, 2010, 25(9): 956～964

[9] 周小芬, 符仁钰, 苏钰 等. 应变和应变速率对Fe-24Mn-0.5C TWIP钢亚结构的影响［J］. 材料热处理学报, 2009, 30(5): 145～148

    Zhou Xiaofen, Fu Renyu, Su Yu et al.. Influence of strain and strain rate on twin substructure of Fe-24Mn-0.5C TWIP steel［J］. Transactions of Materials and Heat Treatment, 2009, 30(5): 145～148

[10] M. Turski, S. Clitheroe, A. D. Evans et al.. Engineering of the residual stress state and microstructure of stainless steel with mechanical surface treatments［J］. Applied Physics A: Materials Science & Processing, 2010, 99(3): 549～556

[11] I. Altenberger, E. A. Stach, G. Liu et al.. An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening［J］. Scripta Materialia, 2003, 48(12): 1593～1598

[12] I. Nikitin, I. Altenberger, B. Scholtes. Residual stress state and cyclic deformation behaviour of deep rolled and laser-shock peened AISI 304 stainless steel at elevated temperatures［J］. Materials Science Forum, 2005, 490-491: 376～383

[13] M. A. Meyers, M. S. Schneider, H. Jarmakani et al.. Deformation substructures and their transitions in laser shock-compressed copper-aluminum alloys［J］. Metallurgical and Materials Transactions A: Chemistry and Materials Science, 2008, 39(2): 304～321

[14] 郭乃国, 罗新民, 花银群. 激光冲击处理对金属微结构及其性能的影响［J］. 材料导报, 2006, 20(6): 11～13

    Guo Naiguo, Luo Xinmin, Hua Yinqun. The effects of laser shock processing on microstructure and properties of metal［J］. Materials Review, 2006, 20(6): 11～13

[15] 任旭东, 皇甫喁卓, 阮亮 等. 激光冲击对中高温服役条件下镍基合金K417显微硬度的影响［J］. 中国激光, 2012, 39(7): 0703005

    Ren Xudong, Huangfu Yongzhuo, Ruan Liang et al.. Effects of laser shock processing on micro-hardness of Ni-based superalloy K417 at elevated temperature［J］. Chinese J. Lasers, 2012, 39(7): 0703005

[16] I. Nikitin, I. Altenberger. Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25~600 ℃［J］. Materials Science and Engineering A, 2007, 465(1-2): 176～182

[17] 周志敏. 位错组态演化［M］. 沈阳: 东北大学出版社, 2003. 4

    Zhou Zhimin. The Evelution of Dislocation Configuration［M］. Shenyang: Northeast University Press, 2003. 4

[18] 罗新民, 马辉, 张静文 等. 激光冲击中的“应变屏蔽”和“约束击穿”［J］. 材料导报, 2010, 20(3): 11～15

    Luo Xinmin, Ma Hui, Zhang Jingwen et al.. "Strain-screening" and "constraint breakdown" in laser shock processing［J］. Materials review, 2010, 20(3): 11～15

[19] Thomas Gareth, Michael J. Gorringe. 材料的透射电子显微术［M］. 第一版 洪班德 译. 北京: 机械工业出版社, 1985

    Thomas Gareth, Michael J. Gorringe. Transmission Electron Microscopy of Materials［M］. 1st Edition. Hong Bande Transl., Beijing: Mechanical Industry Press, 1985

[20] 赵玉环. 变形金属在等温退火时位错密度的变化［J］. 东北工学院学报, 1965, (1): 25～31

    Zhao Yuhuan. The change of dislocation density of deformed metals at isothermal annealing［J］. Journal of Northeast Institute of Technology, 1965, (1): 25～31

[21] 李强, 徐永波, 赖祖涵 等. Monel合金高速塑性剪切变形与动态再结晶［J］. 金属学报, 1999, 35(1): 49～52

    Li Qiang, Xu Yongbo, Lai Zuhan et al.. High velocity plastic deformation and dynamic recrystallization of monel alloy［J］. Acta Metall. Sin., 1999, 35(1): 49～52

[22] 徐永波, 白以龙. 动态载荷下剪切变形局部化、微结构演化与剪切断裂研究进展［J］. 力学进展, 2007, 37(4): 496～516

    Xu Yongbo, Bai Yilong. Shear localization, microstructure evolution and fracture under high strain rate［J］. Advances in Mechanics, 2007, 37(4): 496～516

[23] 罗新民, 张静文, 马辉 等. 2A02铝合金中强激光冲击诱导的位错组态分析［J］. 光学学报, 2011, 31(7): 714002

    Luo Xinmin, Zhang Jingwen, Ma Hui et al.. Dislocation configurations induced by laser shock processing of 2A02 aluminum alloy［J］. Acta Optica Sinica, 2011, 31(7): 714002

[24] 杨钢, 孙利军, 张丽娜 等. 形变孪晶的消失与退火孪晶的形成机制［J］. 钢铁研究学报, 2009, 21(2): 39～43

    Yang Gang, Sun Lijun, Zhang Li′na et al.. Annihilation of deformation twins and formation of annealing twins［J］. Journal of Iron and Steel Research, 2009, 21(2): 39～43