激光重熔NiCrBSi+TiN复合涂层及界面组织

刘荣祥; 郭立新; 雷廷权

中国激光, 2005, 32 (2): 292, 网络出版: 2006-06-01

激光重熔NiCrBSi+TiN复合涂层及界面组织

Study on Interface Microstructure and Laser Re-melting NiCrBSi+TiN Coating

论文大纲

刘荣祥 ^*郭立新雷廷权

作者单位

哈尔滨工业大学材料科学系, 黑龙江哈尔滨 150001

激光技术激光重熔扩散层复合涂层金属间化合物 laser technique laser re-melting diffusion layer compound coating intermetallic compound

摘要

在Ti6Al4V合金表面上进行了激光重熔NiCrBSi+TiN涂层试验,利用扫描电镜(SEM)和X射线衍射仪(XRD)等手段对熔覆层的组织进行了分析。探讨了TiN的行为及其对组织的影响,测试了熔覆层显微硬度。结果表明, 熔覆层由(Cr-Ni-Fe),TiN,NiB,Cr2Ti,Ti2Ni等相组成。在激光重熔过程中TiN颗粒发生了大量的分解, 部分分解而来的[Ti],[N]参与熔池冶金反应,[Ti]与NiCrBSi粉末中的Ni,Cr元素发生反应形成Cr2Ti,Ti2Ni金属间化合物,而[N]在冷却时又以TiN,TiN0.3,TiN0.9三种形式在不同部位原位析出,在结合区与热影响区之间有5～6 μm的扩散层,Ni元素在扩散层内有明显的浓度梯度。

Abstract

The re-melting coating of NiCrBSi+TiN metal-ceramic powders sprayed on the surface of Ti6Al4V alloy was performed by CO2 laser. By means of scan electron microscopy (SEM) and X-ray diffraction (XRD), microstructure of the coating was investigated and microhardness was measured. The effect of TiN on microstructure is discussed. The experimental results show that the phase of coating are composed of (Cr-Ni-Fe), TiN, NiB, Cr2Ti, Ti2Ni et al.. The TiN particles are dissolved into [Ti] and [N] during laser heating, intermetallic compound Cr2Ti and Ti2Ni result from some of the [Ti] combining with Ni, Cr, and TiN, TiN0.3, TiN0.9 precipitated during cooling in differ position. Thickness of the diffusion layer is approximately 5～6 μm existing between the dilution zone (DZ) and the heat-affected zone (HAZ), concentration gradient of Ni is distinctness in the diffusion layer.

参考文献

[1] Sun Ronglu, Liu Yong, Yang Dezhuang. Microstructure and tribological properties of NiCrBSi-TiC laser clad layer on titanium alloy substrate [J]. Chinese J. Lasers, 2003, 30(7): 659～662
孙荣禄,刘勇,杨德庄. 钛合金表面激光熔覆NiCrBSi-TiC复合涂层的组织和摩擦磨损性能[J]. 中国激光, 2003, 30(7):659～662

[2] Sun Ronglu, Guo Lixin, Dong Shangli et al.. Study on microstructure of laser-clad NiCrBSi-TiC coating on the surface of titanium alloy [J]. Chinese J. Lasers, 2001, A28(3):275～278
孙荣禄,郭立新,董尚利等. 钛合金表面激光熔覆NiCrBSi-TiC复合涂层的组织研究[J]. 中国激光, 2001, A28(3):275～278

[3] Wang Xinhong, Zhang Min, Zou Zengda et al.. Investigation on the microstructure and properties of laser clad TiCp/NiCrBSi alloys composite coating [J]. Chinese J. Lasers, 2003, 30(6):562～566
王新洪,张敏,邹增大等. 激光熔覆TiCp/NiCrBSi复合涂层的组织与摩擦学性能[J]. 中国激光, 2003, 30(6):562～566

[4] Si Songhua, Yuan Xiaomin, He Yizhu et al.. Microstructures and properties of laser clad Ni-based metal-ceramics layers [J]. Chinese J. Lasers, 2002, A29(8):759～762
斯松华,袁晓敏,何宜柱等. 激光熔覆镍基金属陶瓷涂层的组织性能研究[J]. 中国激光, 2002, A29(8):759～762

[5] R. L. Sun, D. Z. Yang, L. X. Guo et al.. Laser cladding of Ti-6Al-4V alloy with TiC and TiC+NiCrBSi powders [J]. Surface and Coatings Technology, 2001, 135(2～3):307～312

[6] Tian Nailiang, Du Rongjian, Zhou Changchi. Study on stress status of WC doped Ni-based alloy by laser cladding [J]. Chinese J. Lasers, 2004, 31(4):505～508
田乃良,杜荣建,周昌炽. 激光熔覆添加碳化钨的镍基合金应力状况研究[J]. 中国激光, 2004, 31(4):505～508

[7] . Mridha, T. N. Baker. Composite layer formation on Ti-6Al-4V surfaces by laser treatment using preplaced SiC powder[J]. Surface Engineering, 1997, 13(3): 233-237.

[8] . Hu, L. Barnard, S. Mridha et al.. The role of SiC particulate and Al2O3 (Saffil) fibers in several alloys during the formation of in situ MMCs developed by laser processing[J]. J. Materials Processing Technology, 1996, 58(1): 87-95.

[9] Xinlin Wang, Shihong Shi, Qiguang Zheng. Wear resistance of laser cladding and plasma spray welding layer on stainless steel surface [J]. Chin. Opt. Lett., 2004, 2(3):151～153

[10] . A. Molian, L. Hualun. Laser cladding of Ti-6Al-4V with BN for improved waer performance[J]. Wear, 1989, 130(10): 337-352.

[11] H. M. Wang, Y. F. Liu. Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy [J]. Materials Science and Engineering, 2002, A338(1～2):126～132

刘荣祥, 郭立新, 雷廷权. 激光重熔NiCrBSi+TiN复合涂层及界面组织[J]. 中国激光, 2005, 32(2): 292. 刘荣祥, 郭立新, 雷廷权. Study on Interface Microstructure and Laser Re-melting NiCrBSi+TiN Coating[J]. Chinese Journal of Lasers, 2005, 32(2): 292.

激光重熔NiCrBSi+TiN复合涂层及界面组织

关于本站 Cookie 的使用提示

全站搜索

激光重熔NiCrBSi+TiN复合涂层及界面组织

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索