红外与激光工程, 2005, 34 (1): 8, 网络出版: 2006-05-25
资源遥感用红外多谱段探测器组件性能探讨
Discussion on infrared detectors assembly's performance for resources remote sensing
摘要
资源遥感对红外探测器有较高的要求,如高探测率、高可靠性、低功耗、多谱段、探测率均匀性好、探测器元间串音小、可在较高温度下工作等.从工程应用的角度出发,将滤光片、红外探测器和前置放大器视为一个组件,考虑三者间的相互影响,对组件的主要性能指标和评测方法进行了论述,提出了探测器组件设计和测试时需要注意的问题.在实际工作中,根据系统要求,正确理解性能参数的含义,从应用的角度提出合理的测试评价方法,对推动红外探测器的应用具有重要意义.
Abstract
The high demand is applied to the infrared detectors for resources remote sensing,such as high detectivity, high reliability, low power, multi-waveband, good uniformity of detectivity. The assembly usually consists of filters, infrared detectors and pre-amplifiers. The main parameters of the assembly for remote sensing applications are discussed in this paper. Some problems are thought over in the assembly designing and testing. In detector applications, it is very important that specific meaning of assembly parameters and reasonable testing methods are very important.
参考文献
[1] 方家熊,徐国森,张林法,等.卫星用长波HgCdTe探测器的研究[J].红外研究,1990,9(2):123-128.
[2] Robert E Fischer;吴晓靖,张振,宋洪君,等.光学系统设计[M].天津:《红外与激光工程》编辑部,2004.13.
[3] 科洛勃罗多夫B T,舒斯特N;周金利,温宗平,马天一,等.红外热成像[M].天津:《红外与激光工程》编辑部,2000.113.
[4] 母国光.现代光学与光子学的进展[M].天津:天津科学技术出版社,2003.365.
翟文生. 资源遥感用红外多谱段探测器组件性能探讨[J]. 红外与激光工程, 2005, 34(1): 8. 翟文生. Discussion on infrared detectors assembly's performance for resources remote sensing[J]. Infrared and Laser Engineering, 2005, 34(1): 8.
PDF全文
