[1] 宋登元, 王秀山. 超大规模集成电路芯片的激光缺陷检测技术[J]. 激光杂志, 1998, 19(6): 3-5.

    Song D Y, Wang X S. Laser defect detection techniques for very large scale integration (VLSI) wafers[J]. Laser Journal, 1998, 19(6): 3-5.

[2] 李新科. 桥梁拉索表面缺陷图像检测关键技术的研究[D]. 重庆: 重庆大学, 2014.

    Li XK. Research on the key technology of image detection of bridge cable surface defects[D]. Chongqing: Chongqing University, 2014.

[3] 王世通, 杨甬英, 赵丽敏, 等. 光学元件表面缺陷散射光成像数值模拟研究[J]. 中国激光, 2015, 42(7): 0708005.

    Wang S T, Yang Y Y, Zhao L M, et al. Numerical simulation research on scattering light imaging of surface defects of optical components[J]. Chinese Journal of Lasers, 2015, 42(7): 0708005.

[4] 沈毅, 陈志彦, 邱建榕, 等. 并行谱域光学相干层析成像技术的研究进展[J]. 中国激光, 2018, 45(2): 0207004.

    Shen Y, Chen Z Y, Qiu J R, et al. Research progress on parallel spectral domain optical coherence tomography technology[J]. Chinese Journal of Lasers, 2018, 45(2): 0207004.

[5] 沈玉娣. 现代无损检测技术[M]. 西安: 西安交通大学出版社, 2012: 12- 67

    Shen YD. Modern nondestructive testing technology [M]. Xi’an: Xi’an Jiaotong University Press, 2012: 12- 67

[6] 杜英华. 合成孔径聚焦超声成像技术研究[D]. 天津: 天津大学, 2010.

    Du YH. Research on synthetic aperture focused ultrasound imaging technology[D]. Tianjin: Tianjin University, 2010.

[7] 李俊燕, 沈中华, 倪晓武, 等. 基于合成孔径聚焦技术的激光超声无损检测方法研究[J]. 中国激光, 2018, 45(9): 0904003.

    Li J Y, Shen Z H, Ni X W, et al. Laser-ultrasonic non-destructive detection based on synthetic aperture focusing technique[J]. Chinese Journal of Lasers, 2018, 45(9): 0904003.

[8] 罗嵘. 基于频域合成孔径聚焦的主轴超声成像方法研究[D]. 南昌: 南昌航空大学, 2018.

    LuoR. Research on principal axis ultrasound imaging method based on frequency domain synthetic aperture focusing[D]. Nanchang: Hangkong University, 2018.

[9] 孙宝申, 沈建中. 合成孔径聚焦超声成像(一)[J]. 应用声学, 1993, 12(3): 43-48.

    Sun B S, Shen J Z. Synthetic aperture focused ultrasound imaging (1)[J]. Applied Acoustics, 1993, 12(3): 43-48.

[10] 孙宝申, 沈建中. 合成孔径聚焦超声成像(二)[J]. 应用声学, 1993, 12(5): 39-45.

    Sun B S, Shen J Z. Synthetic aperture focused ultrasound imaging (2)[J]. Applied Acoustics, 1993, 12(5): 39-45.

[11] 孙宝申, 沈建中. 合成孔径聚焦超声成像(三)[J]. 应用声学, 1993( 3): 39- 44.

    Sun BS, Shen JZ. Synthetic aperture focused ultrasound imaging (3)[J]. Applied Acoustics, 1993( 3): 39- 44.

[12] 孙宝申, 张凡, 沈建中. 合成孔径聚焦声成像时域算法研究[J]. 声学学报, 1997, 22(1): 42-49.

    Sun B S, Zhang F, Shen J Z. Synthetic aperture focusing in time-domain for acoustic imaging[J]. Acta Acustica, 1997, 22(1): 42-49.

[13] StepinskiT, LingvallF. Optimized algorithm for synthetic aperture imaging[C]//IEEE Ultrasonics Symposium, 2004, August 23-27, 2004, Montreal, Quebec, Canada.New York: IEEE Press, 2004: 701- 704.

[14] Stolt R H. Migration by Fourier transform[J]. Geophysics, 1978, 43(1): 23-48.

[15] Busse L J. Three-dimensional imaging using a frequency-domain synthetic aperture focusing technique[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1992, 39(2): 174-179.

[16] Bednar J B. A brief history of seismic migration[J]. Geographics, 2005, 70(3): 1342-1351.

[17] Olofsson T, Stepinski T. Phase shift migration for imaging layered materials and objects immersed in water[J]. 2009 IEEE International Ultrasonics Symposium, 2009: 673-676.

[18] Skjelvareid MH, BirkelundY, OlofssonT, et al.Ultrasonic imaging of pitting using multilayer synthetic aperture focusing[C]//2011 IEEE International Ultrasonics Symposium, October 18-21, 2011, Orlando, FL, USA.New York: IEEE Press, 2011: 2042- 2045.

[19] Lukomski T, Stepinski T, Kowal J. Synthetic aperture focusing technique with virtual transducer for immersion inspection of solid objects[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2012, 54(11): 623-627.

[20] 李加, 倪辰荫, 张宏超, 等. 基于激光辅助加热的激光超声投捕法识别微裂纹[J]. 中国激光, 2013, 40(4): 0408008.

    Li J, Ni C Y, Zhang H C, et al. Detection of micro-crack by ultrasonic approach of one-sided pitch-catch method based on laser assisted heating[J]. Chinese Journal of Lasers, 2013, 40(4): 0408008.

[21] 尤博文, 倪辰荫, 沈中华. 光热调制裂纹闭合的激光超声实时监测[J]. 中国激光, 2019, 46(2): 0204009.

    You B W, Ni C Y, Shen Z H. Laser ultrasonic real-time monitoring of photothermal modulation crack closure[J]. Chinese Journal of Lasers, 2019, 46(2): 0204009.

[22] 郑杰, 沈中华, 倪辰荫. 模拟裂纹闭合的激光超声实验研究[J]. 光学学报, 2019, 39(12): 1212003.

    Zheng J, Shen Z H, Ni C Y. Experimental study on simulated crack closure using laser ultrasonic[J]. Acta Optica Sinica, 2019, 39(12): 1212003.

[23] 许薇, 沈中华, 倪辰荫, 等. 温度对薄板中零群速度Lamb波的影响[J]. 中国激光, 2019, 46(12): 1202005.

    Xu W, Shen Z H, Ni C Y, et al. Influence of temperature on zero-group-velocity lamb waves of thin plate[J]. Chinese Journal of Lasers, 2019, 46(12): 1202005.

[24] LevesqueD, OchiaiM, BlouinA, et al.Laser-ultrasonic inspection of surface-breaking tight cracks in metals using SAFT processing[C]//2002 IEEE Ultrasonics Symposium, 2002. Proceedings, October 8-11, 2002, Munich, Germany.New York: IEEE Press, 2002: 753- 756.

[25] Lévesque D, Blouin A, Néron C, et al. Performance of laser-ultrasonic F-SAFT imaging[J]. Ultrasonics, 2002, 40(10): 1057-1063.

[26] LévesqueD, BescondC, LordM, et al. Inspection of additive manufactured parts using laser ultrasonics[J]. AIP Conference Proceedings, 1706( 1): 130003.

[27] Lévesque D, Asaumi Y, Lord M, et al. Inspection of thick welded joints using laser-ultrasonic SAFT[J]. Ultrasonics, 2016, 69: 236-242.

[28] 李明奇, 田太心. 数学物理方程[M]. 成都: 电子科技大学出版社, 2014: 18- 43

    Li MQ, Tian TX. Mathematical and physical equations [M]. Chengdu: University of Electronic Science and Technology Press, 2014: 18- 43

[29] 张进朋, 秦训鹏, 袁久鑫, 等. 基于激光超声衍射体波的缺陷定位定量检测[J]. 光学学报, 2020, 40(12): 1214002.

    Zhang J P, Qin X P, Yuan J X, et al. Defect location and size detection based on laser ultrasonic diffraction bulk wave[J]. Acta Optica Sinica, 2020, 40(12): 1214002.

[30] 沈中华, 袁玲, 张宏超, 等. 固体中的激光超声[M]. 北京: 人民邮电出版社, 2015: 9- 10

    Shen ZH, YuanL, Zhang HC, et al.Laser ultrasound in solids [M]. Beijing: People's Posts and Telecommunications Press, 2015: 9- 10