光学技术, 2007, 33 (5): 0785, 网络出版: 2010-06-03
光纤陀螺SFS光源温度稳定性及驱动控制研究
Research on driving control of SFS used in FOG
摘要
随着光纤陀螺研究的不断进展，对陀螺光源的稳定性的要求也越来越高。SFS(超荧光光纤光源)正是应用于高精度陀螺要求的宽带光源，它的平均波长和功率的温度稳定性直接影响着光纤陀螺的性能。从SFS的特性分析对其驱动系统进行了设计，提出并实现了温度稳定性的控制方案。
Abstract
With the rapidly development of the FOG,The stability of SFS light source has very important effect on the performances of high precision FOG. SFS is a broad band fiber source. The average wavelength and powers are affected by temperature. Base on the analysis of characteristics of SFS the drive and control system are designed. The schemes for improving the temperature stability is provided and realized.
参考文献
[1] Lefevre H C.光纤陀螺仪[M]．张桂才，王巍，译．北京：国防工业出版社．2002．4-23．
[2] 肖瑞．掺饵光纤光源研究[D]．长沙：国防科学技术大学，2002．
[3] Yang Y H,Zeng W Z,Jia Y. High performance superfluorescent fiber source for FOG[J]. SPIE,2005,5634:348-352.
[4] 游伯坤，等．温度测量与仪表[M]．北京：科学技术文献出版社，1990．
付博, 陈淑芬. 光纤陀螺SFS光源温度稳定性及驱动控制研究[J]. 光学技术, 2007, 33(5): 0785. FU Bo, CHEN Shu-fen. Research on driving control of SFS used in FOG[J]. Optical Technique, 2007, 33(5): 0785.
PDF全文
