SiO<sub>2</sub>材料蒸发特性对膜厚均匀性的影响

膜厚均匀性是评价光学薄膜的重要标准之一。膜厚均匀性不好,膜系特性就会遭到严重破坏。作为用于光学薄膜的主要低折射率材料,SiO₂导热性很弱,且以升华的方式进行蒸发,具有特殊的蒸发特性,导致在利用电子束加热蒸发方式镀膜的过程中,膜厚分布会发生明显变化,从而严重影响薄膜质量。为了分析SiO₂材料蒸发特性对膜厚均匀性的影响,对电子束焦斑热量分布进行了计算模拟,据此得到蒸发质量的分布。根据蒸发质量分布和蒸发源表面各点蒸发角的变化,计算了蒸发源在空间球面和空间平面上的分布。根据分析结果,总结了SiO₂材料蒸发特性对膜厚均匀性产生影响的原因及膜厚分布的特点,为调整和改进SiO₂材料镀膜工艺提供参考。

Abstract

Uniformity of thin-film thickness is one of the main standards of judging optical thin film. The bad uniformity of thin film can damage the characteristics of costing system. As a main material of low refractive index to preparation of optic thin film,SiO₂ is poor thermal conductivity and sublimes. The particularity of evaporation characteristic of SiO₂ leads to obvious change of thin film thickness when SiO₂ is evaporated by e-beam method,which affects the quality of thin film heavily. For the purpose of analyzing the impacts of evaporation characteristics of SiO₂ on uniformity of thin film thickness,the heat distribution of e-beam spot is calculated and simulated,and the mass distribution is calculated. According to the mass distribution and the change of evaporation angle of point on evaporation surface,the thin film thickness distribution on spherical surface and flat surface is calculated. The reason of making the impact of evaporation characteristics of SiO₂ on uniformity of thin film thickness,and the particularity of thin film thickness distribution are concluded,which offer references of adjusting and improving the technological parameters for thin film coating of SiO₂ material.

参考文献

[1] 方明,邵淑英,沈雪峰等. HfO2薄膜生长应力演化研究[J]. 光学学报,2009,29(6):1734-1739

FangMing,Shao Shuying,Shen Xuefeng et al.. Evolution of growth stress of HfO2 thin film[J]. Acta Optica Sinica,2009,29(6):1734-1739

[2] 田雪松,刘金成,李连江等. 二氧化钒薄膜用于激光防护时膜层厚度的计算[J]. 中国激光,2008,35(s1):161-163

Tian Xuesong,Liu Jincheng,Li Lianjiang et al.. Thin films thickness calculation of vanadium dioxide using as laser protection material[J]. Chinese J. Lasers,2008,35(s1):161-163

[3] 王善成,方明,易葵等. 电子束蒸发镀膜速率控制[J]. 中国激光,2008,35(10):1591-1594

Wang Shancheng,Fang Ming,Yi Kui et al.. Rate control in electron-beam evaporated optical coatings[J]. Chinese J. Lasers,2008,35(10):1591-1594

[4] 王善成,郭世海,易葵. 电子束蒸发速率自动控制设备及其控制方法:中国,200710047629.1[P]. 2007-10-31

Wang Shancheng,Guo Shihai,Yi Kui. The equipment of controlling deposition rate of e-beam evaporation and the control mathod: China,200710047629.1[P]. 2007-10-31

[5] 周婧,郭世海,易葵. 计算机控制的电子束偏转设备:中国,200610028628.8[P]. 2006-07-05

Zhou Jing,Guo Shihai,Yi Kui. Computer controlled equipment of e-beam deflection:China,200610028628.8[P]. 2006-07-05

[6] M. Ohring. Materials Science of Thin Films:Deposition and Structure [M]. Boston:Academic Press,2002

[7] . Powell,U. Pal,J. van den Avyle et al.. Analysis of multicomponent evaporation in electron beam melting and refining of titanium alloys[J]. Metallurgical and Materials Transactions B, 1997, 28(6): 1227-1239.

[8] . Powell,P. Minson,G. Trapaga et al.. Mathematical modeling of vapor-plume focusing in electron-beam evaporation[J]. Metallurgical and Materials Transactions A, 2001, 32(8): 1959-1966.

[9] 唐晋发,顾培夫,刘旭等. 现代光学薄膜技术[M]. 杭州:浙江大学出版社,2006. 221-271

Tang Jinfa,Gu Peifu,Liu Xu et al.. Modern Optical Thin Film Technology[M]. Hangzhou:Zhejiang University Press,2006. 221-271

[10] D. M. Mattox. Handbook of Physical Vapor Deposition (PVD) Processing [M]. New York:William Andrew Publishing/Noyes,1998

王宁, 邵建达, 易葵, 魏朝阳. SiO₂材料蒸发特性对膜厚均匀性的影响[J]. 中国激光, 2010, 37(8): 2051. Wang Ning, Shao Jianda, Yi Kui, Wei Chaoyang. Impact of Evaporation Characteristics of SiO₂ on Uniformity of Thin-Film Thickness[J]. Chinese Journal of Lasers, 2010, 37(8): 2051.

SiO₂材料蒸发特性对膜厚均匀性的影响

关于本站 Cookie 的使用提示

全站搜索

SiO2材料蒸发特性对膜厚均匀性的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

SiO₂材料蒸发特性对膜厚均匀性的影响