光学仪器, 2015, 37 (3): 245, 网络出版: 2015-08-25
基于双光楔的像移补偿方法研究
The study of image motion compensation method based on a double wedge
摘要
车载扫描凝视系统在扫描成像时由于转台转动而引起的像移必然造成图像质量下降, 进而导致虚警率升高, 要消除像移必须进行像移补偿。基于像移产生原因以及双光楔对光束的导向模型, 推解出因转台旋转而需补偿的光楔的初始位置及旋转速度, 来补偿曝光阶段引起的像移。提出了基于双光楔的像移补偿的新方法。
Abstract
The image motion caused by the turntable’s rotation when vehicle scanning gaze system works leads to the increase of false alarm rate. To eliminate the image motion, image motion compensation must be conducted. Based on the cause of image motion and the model of beam steering, this paper calculates the double wedge’s initial position and rotational speed through the double wedge image motion compensation analysis to compensate the image motion in the exposure phase caused by the turntable’s rotation. This paper proposes a new method on image motion compensation based on a double wedge.
参考文献
[1] 范大鹏, 周远, 鲁亚飞, 等.旋转双棱镜光束指向控制技术综述[J].中国光学, 2013, 6(2):136-145.
[2] 张玉欣, 刘宇, 葛文奇.像移补偿技术的发展与展望[J].中国光学与应用光学, 2010, 3(2):112-118.
[3] MARSHALL G F.Risley prism scan patterns[J].SPIE, 1999, 3787:74-86.
[4] 周远, 鲁亚飞, 黑沫, 等.旋转双棱镜光束指向解析解[J].光学 精密工程, 2013, 21(6):1373-1379.
[5] 周远, 鲁亚飞, 黑沫, 等.旋转双棱镜光束指向的反向解析解[J].光学 精密工程, 2013, 21(7):1693-1700.
禹凯, 刘岩, 陈波, 于昆昆, 李楷. 基于双光楔的像移补偿方法研究[J]. 光学仪器, 2015, 37(3): 245. YU Kai, LIU Yan, CHEN Bo, YU Kunkun, LI Kai. The study of image motion compensation method based on a double wedge[J]. Optical Instruments, 2015, 37(3): 245.