[1] 尹杰,邱云峰,刘桥, 等. 大尺寸LED超薄灯箱的导光板设计[J]. 激光与光电子学进展, 2010, 47(12): 120801.

    Yin Jie, Qiu Yunfeng, Liu Qiao, et al.. Design of light guide plate for large-size LED slim light box[J]. Laser & Optoelectronics Progress, 2010, 47(12): 120801.

[2] 黄翀,姜言森,沈奕,等. 侧光式LED背光源的导光板网点设计[J]. 应用光学, 2008, 29(5): 689-692.

    Huang Chong, Jian Yansen, Shen Yi, et al.. Design of scattering netted dots on light guide plate of edge-lighting LED backlight[J]. J Applied Optics, 2008, 29(5): 689-692.

[3] 吴桔生,何华,李宏彦, 等. 导光板散射点的初步设计[J]. 现代显示， 2007， 18(4): 36-39.

    Wu Jiesheng, He Hua, Li Hongyan, et al.. A preliminary design of the scattering point of light guide plates [J]. Advanced Display, 2007, 18(4): 36-39.

[4] O Rtting, W Ropke, H Becker, et al.. Polymer microfabrication technologies[ J]. Microsyst Technol, 2002, 8(1): 32-36.

[5] A Costela, I Garciamoreno, F Floridoetal. Laser ablation of polymeric materials at 157 nm[ J]. J Appl Phys, 1995, 77(6): 2343-2350.

[6] 祁恒, 王贤松, 陈涛, 等. PMMA基连续流式PCR微流控芯片的CO2 激光直写加工与应用[J]. 中国激光, 2009, 36(5): 1239-1245.

    Qi Heng, Wang Xiansong, Chen Tao, et al.. Fabrication and application of PMMA continuous flow PCR microfluidic chip with CO2 laser direct writing ablation micromachining technique[ J]. Chinese J Lasers, 2009, 36(5): 1239-1245.

[7] 申雪飞，陈涛. CO2激光直写PMMA微通道工艺改进的实验研究[J]. 中国激光, 2011, 38(6): 251-255.

    Shen Xuefei, Chen Tao. Improvement of processing technique of CO2 laser direct writing on PMMA micro channels[J]. Chinese J Lasers, 2011, 38(6): 251-255.

[8] 李晓宇，陈继民，刘富荣, 等. CO2激光刻蚀PMMA制备微流道的研究[J]. 激光与光电子学进展, 2011, 48(4): 041401.

    Li Xiaoyu, Cheng Jimin, Liu Furong, et al.. Micro-channel fabrication with CO2 laser ablation of polymethyl methacrylate[J]. Laser & Optoelectronics Progress, 2011, 48(4): 041401.

[9] Klank H, Kutter J P, Geschke O. CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems[J]. Lab on a Chip, 2002, 2(4): 242-246.